Congratulations on your purchase of the Pet Stop® PowerWizard™ battery back-up
system. When used with the Pet Stop transmitter, it will provide a safe and secure alter-
native power source should your transmitter sustain a loss of electricity for a period of
time. It is designed to be used to charge a lead acid battery that was supplied by your
authorized Pet Stop Dealer. The amount of time the unit can keep a transmitter running
depends on the size of the battery used with the system.
Introduction
2
CAUTION:
DO NOT use this product with any battery other than a 12 volt
acid battery.
DO NOT allow a metallic object to contact both battery terminals
at the same time. Doing so can present a fire hazard.
A.
Small jack (denoted J1) located
on the bottom left of the circuit
board. This is where the 12VAC
wall adapter is connected.
B.
The power cord connects to
the transmitter. This connec-
tion takes the place of a wall
transformer connecting to the
transmitter.
C.
The final connection point is a
terminal block in the bottom
right of the board. This is where
the battery will be connected.
Connection Identification
