PG Drives Technology SK79761-3 Manuale utente
PG DRIVES TECHNOLOGY R-NET OMNI-IR
SK79761/3 1
R-NET OMNI
INFRARED (IR)
CONTROL
OPERATING MANUAL
SK79761-3
PG DRIVES TECHNOLOGY R-NET OMNI-IR
SK79761/32
© PG Drives Technology 2011
All rights reserved.
This manual is furnished under copyright and may only be used in accordance
with the terms laid out by PG Drives Technology.
The information in this manual is furnished for informational use only, is subject
to change without notice, and should not be construed as a commitment by
PG Drives Technology.
Except as permitted by such terms, no part of this manual may be reproduced,
stored in a retrieval system, or transmitted, in any form or by any means
electronic, mechanical, recording, or otherwise - without the prior written
permission of PG Drives Technology. +44 (0) 1425 271444
PG DRIVES TECHNOLOGY R-NET OMNI-IR
SK79761/3 3
TABLE OF CONTENTS
About this manual ................................................................................. 5
1General ..................................................................................... 7
2User Menu.................................................................................. 8
3IR Set Up .................................................................................. 10
3.1 Accessing the IR Set Up Menu ............................................................... 10
3.2 IR Set Up Menu....................................................................................... 10
4Learning an IR Code ............................................................... 12
4.1 Learning an IR Code - Sequence .......................................................... 14
5Enabling and Disabling IR Codes ............................................ 15
6Deleting IR Codes.................................................................... 16
7IR Configuration Tool ............................................................... 18
7.1 Operation Initiation ................................................................................ 19
7.2 The Application Window......................................................................... 20
7.3 Drop Down Menus ................................................................................. 21
7.3.1 File ......................................................................................................... 21
7.3.2 Controller ............................................................................................... 21
7.3.3 Help ....................................................................................................... 22
7.4 Toolbar ................................................................................................... 22
7.5 User Menu .............................................................................................. 23
7.5.1 Insert Appliance. .................................................................................... 24
7.5.2 Insert Command ................................................................................... 24
7.5.3 Insert Sequence. .................................................................................... 25
7.5.3 Delete .................................................................................................... 25
7.5.4 Rename................................................................................................. 25
7.5.5 Move Up ................................................................................................ 25
7.5.6 Move Down............................................................................................ 26
7.5.7 Clear IR Code ........................................................................................ 26
7.5.8 Edit My Library ........................................................................................ 26
PG DRIVES TECHNOLOGY R-NET OMNI-IR
SK79761/34
7.5.9 Assign from Library ................................................................................. 26
7.5.10 Insert from Library .................................................................................. 27
7.6 Libraries.................................................................................................. 27
7.6.1 Default Library ........................................................................................ 27
7.6.2 My Library............................................................................................... 28
7.7.1 Add Appliance ...................................................................................... 30
7.7.2 Edit Appliance ....................................................................................... 32
7.7.3 Delete Appliance................................................................................... 32
7.7.4 Clear All ................................................................................................. 32
8Configuration........................................................................... 33
8.1 Configuration of IR Control Mode .......................................................... 33
8.2 Mode Name.......................................................................................... 33
8.3 Input....................................................................................................... 33
8.4 Output.................................................................................................... 33
9PGDT Default Menu.................................................................. 34
PG DRIVES TECHNOLOGY R-NET OMNI-IR
SK79761/3 5
About this manual
The Technical Manual gives a general introduction to the R-net Omni IR
Configurator and set up. For more detailed and/or current information refer to
the Electronic Manual.
Throughout the manual icons are used to draw the reader’s attention.
The icons used are:
Note - A general point for best practice.
Caution - A point of safety which if ignored could
result in damage to the control system or the vehicle.
Warning - A point of safety which if ignored could
cause injury to the individual.
PG Drives Technology accepts no liability for any losses of any kind if the points
are not followed.
PG DRIVES TECHNOLOGY R-NET OMNI-IR
SK79761/36
PG DRIVES TECHNOLOGY R-NET OMNI-IR
SK79761/3
7
1 General
The Omni includes an IR transmitter and receiver that allows the Omni to
replicate commonly used IR devices, such as remote controls for TV’s, DVD’s,
Cable/Satellite or environmental controls such as automatic door openers.
Once an Omni with IR Control is connected to a R-net system, then IR Control
can be from a conventional Joystick Module (or other Input Device) or from a
Specialty Input Device that is connected to the Omni.
PG DRIVES TECHNOLOGY R-NET OMNI-IR
SK79761/38
2 User Menu
IR Mode is accessed in the normal way of Mode selection, i.e. operation of the
R-net system’s Mode button or Command.
IR Mode will only be available if IR Codes have been stored in the Omni. There
are two ways to store IR Codes in the Omni – by ‘learning’ Codes from IR
handsets or by programming from the PC based IR Configuration Tool, refer to
sections 4 and 7 for respective details of each method.
When an IR Omni is dispatched from PGDT there are
no stored IR Codes.
If IR Mode is not available and there are stored IR
Codes, then refer to section 8, Configuration.
On entering IR Mode the user will be presented with a list of available IR
Appliances, such as below.
When an IR Omni is dispatched from PGDT, it will
contain a default menu as shown in section 9. If
required, the IR Configuration tool can be used to
change this default menu.
PG DRIVES TECHNOLOGY R-NET OMNI-IR
SK79761/3
9
To navigate the IR Mode, using a joystick as an example of an Input Device:
Forward joystick deflections will highlight the Appliance above.
Reverse joystick deflections will highlight the Appliance below.
Left or Right joystick deflections will enter the highlighted Appliance’s sub-menu,
which will contain all the IR Commands for that Appliance
Left or Right joystick deflections will then activate the highlighted IR Command.
For each Appliance there is a list of associated IR Commands. Using the TV
example, Commands such as: On/Off, Channel Up, Channel Down, Volume
Up and Volume Down may be displayed. When the Omni is transmitting the
selected Command, it is highlighted with a red background.
PG DRIVES TECHNOLOGY R-NET OMNI-IR
SK79761/310
3 IR Set Up
3.1 Accessing the IR Set Up Menu
There are two methods of accessing IR set up on the Omni.
•Holding the + and – keys on the Omni, launches the Settings
menu.
Use the four (4) navigation keys on the front screen of the Omni. The Up/Down
keys scroll up and down the menu. The Left/Right keys select the highlighted
option.
•It is also possible to access IR Set Up Menu via OBP
3.2 IR Set Up Menu
Indice
Altri manuali PG Drives Technology Controllori
