Phantomgogo R1 Manuale utente

R1 ELECTRIC

sCOOTER

RIDING GUIDE

Made in China

Table of Contents

R1 Specications 2

Product Conguration 3

Controller Set-Up 4

Packaging 5

Assembly 6

Charging 7

Charging & Battery Safety Tips 8

Care & Maintenance 12

Usage of the R1 Scooter 9

Safety Information 10

Warranty 13

114

warranty

One Year Limited Warranty Bicycle Components

Phantomgogo warrants that all new Electric Bikes/Scooters that are oered for sale by Phantomgogo directly or authorized dealers

and distributors are warranted to the original retail purchaser/customer against manufacturing defects in materials and/or workman-

ship for a period of one (1) year from the date of original retail purchase. If a part fails under normal operating

conditions, then Phantomgogo will replace the part. However, the warranty is void should a bike part fail due to damage caused by rid-

er error, abuse, or negligence or if the bike has been modied or customized.

One Year Limited Warranty Bicycle Components

Phantomgogo warrants to the original purchaser/customer that the battery is free of defects in material and workmanship for one

year. The defective product will be replaced or repaired if met under certain pre-conditions. The original receipt of purchase is required

to establish proof of purchase and warranty date and must be provided to Phantomgogo for all warranty claims. Shipping costs are an

additional charge - the customer shall be responsible for the shipping or transportation costs incurred in returning the battery to

Phantomgogo for evaluation. Shipping charges for the replacement battery that is mailed back to the customer may be waived under

certain circumstances. Please contact Phantomgogo directly to determine battery replacement.

Damage During Shipping

Although damage to the bike during shipping is not covered by this limited warranty, Phantomgogo will oer to x or replace the item

damaged to the best of our ability. Damage claims are very time sensitive and it is your responsibility to notify us immediately when

delivery is made and the bike/scooter is discovered damaged. The following is required to certify the delivery damage:

Please inspect the bike/scooter and packaging when received. If damage is discovered, please contact us immediately.

R1 specications

• Max Supported Weight: 265 lbs

• Min. Supported Weight: 70 lbs

• Max Speed: 15.5 mph

• Max Range: 20 miles

• Motor Power: 450W

• Battery Voltage: 36V DC Lithium Battery

• Battery Capacity: 8Ah

• Twist Throttle: Yes

• Power Requirement: AC 100-240V, 50/60hz

• Front Fork: Rigid Steel Fork

• Tire Size: 12” Front & Rear

• Brake Type: Front & Rear Disc

The following instructions are applicable to the basic user manual. Please pay special attention to Warnings or Notes as

published in this manual. For your cycling safety, please read this manual carefully before using your R1 electric scooter

to make sure you can ride comfortably and correctly.

Care & Maintenance

Storage

• Avoid storing the scooter in direct sunlight. Hot temperatures can cause damage to the battery and function of the scooter.

• Avoid storing electric scooter in wet conditions.

• When the scooter is not being used, the battery can lose power. You should test the battery at least once a month, to ensure the

battery maintains full charging capabilities.

• Avoid leaving the scooter [and battery] idle for long periods of time, as this can cause battery failure.

• In winter, the batteries may lose power faster because of low temperatures.

• Inappropriate storage can shorten the life of the lithium battery life or cause other mechanical problems. Please store the electric

scooter indoors in a cool and dry place.

Cleaning

Before cleaning, make sure the scooter is turned o, unplug the charging line and cover the charging port. During the cleaning

process, be careful keep the water and moisture out of charging port. Use a dry cloth or a damp cloth to clean the cables - do not

spray water on the scooter or battery. During the cleaning process, be careful to keep water out of the charging port. Do not immerse

the electric scooter in water as it will cause permanent damage.

Battery Recycling

Help keep the environment free of litter and harmful pollution by recycling the battery correctly - do not throw batteries in the trash

- please recycle your battery responsibly. Please consult your local sanitation department guidelines for safe disposal of batteries

and parts.

Tire Maintenance

Make sure the pressure of the two tires inated correctly - do not overinate tires and try to keep the two tires at the same pressure.

The default tire pressure both tires is 36/PSI. It is recommended that any at tries be changed by an

experienced bicycle shop mechanic.

123

Product Conguration

Item Description

Frame Aluminum Alloy

Battery voltage 8Ah

Max range 20 miles

Max speed 15.5 mph

Net weight 35.5lbs

Max load 265 lbs

Climbing angle 7.2 degrees

Screen LCD Battery Indicator

Tire size 12” Front & Rear

Brakes Front & Rear Discs

Unit unfolded size: 48.5” x 23” x 37.5”

Unit folded size: 48.5” x 10” x 23”

Charger: AC100-240V/50-60hz

Motor Power: 450W

Battery 36V 8Ah Li Battery

Controller Set Up

Do not use your mobile phone when riding – this can cause you to be distracted – stay alert!

Make Sure Your Scooter is Well-Maintained

Follow the inspection and maintenance guidelines. Check critical safety equipment before every ride.

Know the Law

Cyclists are required to follow the rules of the road. Additionally, some communities regulate the use of motorized vehicles with

minimum age, requirements and necessary equipment. Check with your local police department for specic details.

O-road Riding

O-road riding is not recommended as the scooter tires are for street-use only. Dust and extreme impacts from o-road riding can

cause electrical system problems.

Ride Within Your Limits!

Take it slow until you are familiar with your local riding conditions. Be especially careful in wet conditions as traction can be greatly

reduced and brakes become less eective. Never ride faster than conditions warrant or beyond your riding abilities. Remember that

alcohol, drugs, fatigue, and distractions can signicantly reduce your ability to make good judgments and ride safely.

Analog Bell

Battery Display

Shows the battery strength

illuminated by green colored

bars.

Key Port

Turn right to power

onscooter.

Clamp

Pull up the clamp, then loos-

en the screw to twist/adjust

the handlebar.

packaging

1. Controller

2. Headlight

3. Seat

4. Basket

5. Air Pump

6. Charger Cable

7. Charger

8. Tools

Safety information

Your electric scooter can provide many years of service and fun – if you are safe and responsible when riding.

Always Wear a Helmet

Helmets signicantly reduce the number and severity of head injuries. Always wear a helmet that complies with your local and state

laws when riding the R1 or any electric bicycle for that matter. Check with your local police department for requirements in your com-

munity. DO NOT wear loose tting clothing as they can get tangled in the moving parts of the electric scooter. Wear close-toed shoes.

Always wear a helmet and appropriate apparel when riding. If you are usure, check with your local state laws concerning other protec-

tive gear that may be required when riding the electric scooter.

Know Your R1 ELECTRIC Scooter

Your new R1 Scooter incorporates many features and functions that you may not be familiar with. Read this manual thoroughly to

understand how its features can enhance your riding experience.

Ride Defensively!

One of the most frequent cycling accidents occurs when the driver of a parked car opens his door into a rider’s path. Another

common occurrence is when a car or another cyclist moves suddenly into your path. Always be aware of vehicles around you. Do not

assume that surrounding drivers or pedestrians see you. Be prepared to take evasive action or stop suddenly.

Make Sure You Are Visible to Others!

Make yourself more visible by wearing bright reective clothing. Keep your reectors clean and properly aligned. Use your headlight

in reduced lighting conditions. Signal your intentions so that drivers and other cyclists can anticipate your actions. Use your bell when

needed to make your presence known.

Assembly

Usage of the r1 scooter

• The R1 is a one-person mobility product – anyone who is under 12 years old needs to be assisted when riding.

• The R1 is only for daily recreational use and is not designed for extreme sports.

• Check that the parts of the scooter are installed correctly and not damaged.

• Check that folding mechanism is locked.

• Check the battery – is the battery charged?

• Check the brakes – do they function for both front and rear wheels?

• Check the tires – make sure there are no punctures or bubbles.

• Ride with caution and always wear a helmet.

• Make sure to follow maintenance protocols. Lack of proper maintenance may void warranty.

Handbrakes

Squeeze each brake slowly to avoid stopping

abruptly and losing control.

Hold the folding handle

tightly, swing the bar upward

until the downtube connects

with the frame tube, then

squeeze the quick release

handle towards the tube un-

til it is locked in place.

Charging

• The charging port is located under the R1 baseboard.

• Plug the charging cable into the charging port.

(Make sure the connection is dry)

• The indicator LED of the charging adapter turns red

when charging and turns green when the battery is

full. Please stop charging when it is full to prevent

battery life from deteriorating. Please use the

batteries, chargers and cables supplied by the

original manufacturer to prevent the battery from

being overcharged.

• When nished charging, close the charging ap to

prevent any damage to the port.

Charging & Battery Safety tips

• Check battery level before the rst use.

• It is recommended that the battery be recharged after each use.

• To maximize the battery life, please charge once per month or after at least 2 days of operation.

• Recharge the battery pack at least once per month as all batteries of every type will slowly discharge energy when left idle for extend

ed periods of time.

Try to keep the battery from being exposed to excessive heat or very hot temperatures.

• Please use the batteries, chargers and cables supplied by the original manufacturer to prevent the battery from being overcharged.

• Do not allow the charger or cable to contact sharp or hot items.

• Perform a visual inspection of the charger and charging cables regularly.

• If the charging cable has obvious damage – do not use the charger to avoid injury or electrical damage.

• Please do not repair the battery, the charger, or the cable independently.

• Please ensure that the charger and charging cables are connected correctly and are free of dust, dirt, and water.

• Prolonged exposure to UV rays, rain and elements may damage the encloseure materials, store indoors when not in use.

• The charging range and use range are 0º - 40ºC.

• Please do not disassemble parts by yourself.

Please contact us if you experience any problems or issues.

Indice

Altri manuali Phantomgogo Scooter

Phantomgogo

Phantomgogo A8 Manuale utente

Manuali Scooter popolari di altre marche

TEKTRO

TEKTRO CHEETAH Manuale utente

Douglas

Douglas Vespa Sprint Guida all'installazione

PLAYTIVE

PLAYTIVE AS-2448 Manuale utente

Ebinger

Ebinger DONKEY XL Manuale utente

Flyer

Flyer Mountain Guida utente

BackCountry eBikes

BackCountry eBikes Storm Manuale utente

equipmed

equipmed FreeRoam II Manuale utente

Yoto

Yoto Lion Manuale utente

WESTHILL BIKES

WESTHILL BIKES LINK Manuale utente

BAnff

BAnff eProdigy series Manuale utente

Winther

Winther 475 Manuale utente

Jetson

Jetson JBZL17 Manuale utente

First Choice Mobility

First Choice Mobility Roma Medical Corella S741 Manuale utente

Carrera

Carrera impel Manuale utente

Afikim

Afikim Superlight SL-3 Manuale utente

CareCo

CareCo ZOOM Manuale utente

Douglas

Douglas Vespa G.S. Manuale utente

Gazelle

Gazelle with BOSCH System Manuale utente