Phenix PH50 series Manuale utente
Phenix PH50 monoculaire microscoop
4503000
Although the design of our product provided the best safety for your usage.
But, inaccuracy of operation method or neglect the usage elucidation probably
cause body hurt and the prop-erty lose. For your safety. Before using this
instrument ,please carefulness reading the instructions.
Don’t lose the instruction manual, please saving it at near the instrument, in
order to consult at any time.
In this instructions, the safety hint is expressed the follow sign. Please you
must obey the sign, insure the right safety operation.
Contents
1. Main Features.................................................................................................................................. 5
2. Usage and Coverage Area ............................................................................................................... 5
3. Electrical Capability ......................................................................................................................... 5
4. Working Circumstance of Microscope ............................................................................................ 6
5. Structure and Nomenclature........................................................................................................... 7
6. Instrument’s Installation ................................................................................................................. 8
7. Operation Procedure..................................................................................................................... 10
8. Digital Part, Installation and Useage of Parts................................................................................ 16
9. Care and maintenance .................................................................................................................. 17
10. Replacing light bulb and fuse .................................................................................................... 18
11. Troubleshooting and Handling .................................................................................................. 20
12. Configuration table.................................................................................................................... 21
1. Main Features
PH50 series biological microscope have Mono Viewing and Bino Viewing for
choice. And can be built-in CMOS or CCD camera system equipped with USB
output ports, making use of computer image processing software and computer
multimedia technology, so that you have observed show for variety of video
figures , can capture images of static and dynamic video, with Objective
measurement and a variety of image processing functions.
2. Usage and Coverage Area
PH50 is an ideal instrument for use in clinic and hospital laboratory, research
institution, university in the research of biology, pathology, bacteriology, also for
educational laboratory sessions.
3. Electrical Capability
3.1 Using the specified power supply:
For Domestic market: input Voltage: AC. 220V 50Hz.
For overseas market: input voltage: AC. 110V 60Hz ～AC. 230V 50Hz
3.2 Using Specified Light bulb, Power wire, and Fuse
Halogen light: 12V/20W Fuse: 0.5A
Power wire: with earthed wire
4. Working Circumstance of Microscope
This microscope is a precise optical instrument, if the usage or safekeeping isn’t
appropriate, it will cause the instrument damaged or influence precision. While
choose to use the place, please consider the following condition
The place for this microscope should not be too bright, and direct sun shine on
the instrument should be avoided.
The working temperature: 0℃-- 40℃. The maximum relative humidity: 85%,
the heat and humidity can stimulate the growth of mildew, which will cause the
damage to Microscopes and shorten its using life.
Dust can deteriorate the optical performance, avoid to use under such
circumstance.
Using the microscope On the steady and aclinic workbench.
5. Structure and Nomenclature
Fig.1
(1) Viewing head：Viewing components.
(2) Stand: The microscope’s main body.
(3) Revolving nosepiece：Used to select objectives needed(Locate with sound).
(4) Objective：Magnify specimen for the first time.
(5) Slide clip：Clip specimen.
(6) Mechanical stage：Lay specimen
(7) Condenser moving knob：Adjust the height of condenser.
(8) Power plug：Connect power supply.
(9) Fine focusing knob：Tiny focusing.
(10) Coarse focusing knob：Large focusing.
(11) Power switch：Overall power switch of an instrument.
(12) Fuse：fixup fuse.
(13) Elasticity accommodable ring.
(14) Eyepieces: Magnify specimen for the second time, put up observation.
(15) Condenser screw bolt: Fixup condenser.
(16) Axis Y moving knob：Adjust working stage transverse motion.
(17) Axis X moving knob：Adjust working stage lengthways motion.
6. Instrument’s Installation
6.1 Place the microscope on a flat and stable working table, while moving the
instrument, especially the optical parts, make sure to avoid to contact the
lenses surface with hand or artic with
grease.6.2 On the way to transport
carry the objective table, it's surface
will be covered with the protection film,
before use please tear up the prot-
ected film（Fig.2）。
6.3 Place gently the viewing head into the Installation hole. Then use one hand to
press the viewing head from above while other hand fastens the screw located
at the both sides of view head.(Fig.3)
Fig.2
PROTECTION FILM
Fig.3
6.4 Turn on the power: after all above procedures, please insert the Power plug on
the wall outlet, and turn on the Power switch , make sure you are using the right
voltage.
6.5 Insert the Eyepiece: slide the eyepiece into the Eyepiece tube. (Fig.4)
Fig.4
7. Operation Procedure
7.1 Turn on the power
8.1.1 Turn the power switch(turn switch to "-" ), make the bulb give out light。
8.1.2 Then revolve the handwheel of brightness regulates to regulate the
brightness of filed .
7.2 Restoration to adjust diopter of tube
To adjust diopter of tube on the R/L eyepiece tube, Make its bottom edge with
engrave the line to align, use the same method, adjust the left diopter .
7.3 Adjusting pupil distance
By adjusting pupil distance and Diopter ring on eyepiece, to eliminate the
Parallex, and to get the sharp and comfortable viewing. While using bino head,
And field of view is two intersectant circles, by rotating the eyepiece tube, the Eye
Relief has been changed, the field of view became a round view completely
coincided. (Fig.5)
Fig.5
Questo manuale è adatto per i seguenti modelli
11
Indice
