Philips HF3505 Manuale utente

Always here to help you

User manual

www.philips.com/welcome

HF3505

HF3500

HF3505, HF3500

ENGLISH 4

DANSK 11

DEUTSCH 18

ESPAÑOL 25

SUOMI 32

FRANÇAIS 39

ITALIANO 46

NEDERLANDS 53

NORSK 60

PORTUGUÊS 67

 74

SVENSKA 81

Introduction

Congratulations on your purchase and welcome to Philips!

To fully benet from the support that Philips offers, register your product

at www.philips.com/welcome.

The Philips Wake-up Light helps you wake up more pleasantly.The light

intensity of the lamp gradually increases to the set level in the 30 minutes

before the set wake-up time.The light gently prepares your body for waking

up at the set time. To make waking up an even more pleasant experience,

you can use natural wake-up sounds or the FM radio (HF3505 only).

The effects of theWake-up Light

The Philips Wake-up Light gently prepares your body for waking up

during the last half hour of sleep. In the early morning hours our eyes are

more sensitive to light than when we are awake. During that period the

relatively low light levels of a simulated natural sunrise prepare our body

for waking up and getting alert. People who use the Wake-up Light wake

up more easily, have a better overall mood in the morning and feel more

energetic. Because the sensitivity to light differs per person, you can set

the light intensity of your Wake-up Light to a level that matches your light

sensitivity for an optimal start of the day.

For more information about the Wake-up Light, see www.philips.com.

General description (Fig. 1)

1 Wake up light

2 Display brightness

3 Volume lower (HF3505 only)

4 Volume higher (HF3505 only)

5 Radio (HF3505 only)

6 FM scan (HF3505 only)

7 Light on/off

8 Alarm on/off

9 Clock time

10 Alarm sound types (HF3505 only)

11 Antenna (HF3505 only)

Preparing for use

Setting the clock

1 Put the plug in the wall socket.

ENGLISH

2 When plugging in, the clock time will automatically start blinking.

,If the clock time does not start blinking, press the clock button on

the side of the appliance.

,The clock icon appears on the display.

3 Press the + or - button to set the hour and minutes.

Note:You can only do this when you are in the set clock time and when the

time indication ashes. If this is not the case, press the clock button again,

you are now in the set clock time.

4 PresstheClockbuttontoconrm.

You can also wait for 5 seconds before the clock is xed.

Note: Every time you remove the plug from the wall socket, clock time setting

is lost.

Using the appliance

Functions

Below you can nd a list of all functions that can be set in this appliance:

- Clock time

- Time format

- Alarm time

- Alarm sounds (HF3505 only)

- FM (HF3505 only)

- Light level

- Display brightness

You can set these functions in the following way:

ENGLISH 5

Using the light

You can use the appliance as a bedside lamp.

1 To switch on the light, press the lamp on/off button.

,The light icon is shown in the display and the current light level

10 appears.

2 Press the + and - buttons to select a light intensity.

You can choose a light intensity between 1 and 10.

Note: The light intensity you have selected is automatically set as the light

intensity level for the alarm as well.

3 To switch off the lamp, press the lamp on/off button again.

Note: The light level can be adjusted when light is on/off.

Setting time format

Switching between 24h and 12h time mode.

1 Press the Clock button for > 2 seconds.

When the 12h mode is active, PM or AM will be shown in display.

Note: To switch to the 24h mode, press the Clock button again for >2 seconds.

Setting the alarm

When you set the alarm, you choose an alarm time and (only in case of

HF3505) the type of sound you want to wake up to. The alarm is activated

when the alarm symbol is visible on the display.The light intensity slowly

increases to the selected level during the last 30 minutes before the set

alarm time.The sound slowly increases to the selected level after the set

alarm time.

HF3505 only:

Light level range is 1-10, volume level range is 1-10. It is not possible to

switch these functions off.

HF3500 only:

Light level range is 1-10 and there is no volume control for the type of the

appliance. The alarm sound volume is xed.

ENGLISH6

1 Press the alarm button to switch on the alarm.

,Thetimeindicationofthealarmtimeashes.

,Alarm icon appears on display.

2 Press the + or - buttons to select the time.

Note: You can only do this when the time indication ashes. If this is not the

case, press the alarm button again to enter the alarm time mode.

Tip: Press the + or - button >2 seconds to speed up the digit change.

3 PresstheAlarmbuttontoconrmorwaitfor5seconds.

Note: The alarm icon is shown in the display to indicate the alarm is ON.

The alarm time is now set.

Switching off the alarm

When the alarm goes off, you can switch off the alarm by pressing on the

alarm button.The alarm will go off again the next day.

When you want to switch off the alarm for the next day, or before the

alarm goes off, press the alarm button again.

Note: The alarm icon disappears from the display.

Note: The lamp stays on to light your room. You can switch off the lamp by

pressing the light on/off button.

Note: The alarm (sound and/or light) automatically switches off after

90 minutes.

ENGLISH 7

Setting the alarm sound (HF3505 only)

You can choose one of the following sounds by switching the function from:

- Sound I

- Sound II

- Radio

Note: When switching to a new alarm sound or radio, a preview of that sound/

radio will be played for 5 seconds.

Snoozing

1 Tap on top of the appliance to snooze 9 minutes.

,The lamp continues to be on at the selected intensity level, but

the alarm sound stops.After 9 minutes, the wake-up sound is

automatically played again.

Note: The 9-minute snooze time is xed. This time cannot be adjusted.

Radio/volume (HF3505 only)

Tip: Fully unwind the antenna to use the radio function.

1 To switch on the radio, press the radio on/off button.

,The radio icon appears in the display.

ENGLISH8

2 To select the desired radio frequency, press the « and » buttons.

Tip: To scan radio frequencies automatically, press and hold the « or » button

for approx. 2 seconds.

Tip: To make sure you get a good radio signal, fully unwind the antenna and

move it around until you have found a position at which reception is best.

Note: The current radio frequency is shown in the display for 5 seconds, before

clock time is shown again.

3 To switch off the radio, press the radio on/off button again.

Volume

1 To set the volume, press the volume increase or decrease button.

You can choose a volume level between 1 and 10.

Note:The volume level you have selected is automatically set as the volume

level for the alarm as well.

Setting the display brightness

1 Press the Display brightness button to adjust the display brightness.

The brightness of the display will change from high-medium-low-very low.

Demo mode

If you want a quick demonstration (90 seconds) of the gradually increasing

light intensity and sound level, switch on the test function of the appliance.

1 Press and hold the alarm button for at least 3 seconds.

2 The appliance starts the demonstration of the alarm.

3 To switch off the demonstration, press and hold the previously

pressed alarm button for 3 seconds again.

ENGLISH 9

Cleaning and maintenance

Never use scouring pads, abrasive cleaning agents or aggressive liquids

such as petrol or acetone to clean the appliance.

Regularly remove dust from the outside of the appliance with a dry cloth.

1 Unplug the appliance before you clean it.

2 Clean the outside of the appliance with a dry cloth.

Do not let water run into the appliance or spill water onto the appliance.

Replacement

This appliance does not contain any serviceable parts.

Environment

- Do not throw away the appliance with the normal household waste

at the end of its life, but hand it in at an ofcial collection point for

recycling. By doing this, you help to preserve the environment.

ENGLISH10

Altri manuali per HF3505

Questo manuale è adatto per i seguenti modelli

Indice

Lingue:

Altri manuali Philips Sveglia

Philips

Philips AJ3230 Manuale utente

Philips

Philips HF3505/70 Manuale tecnico

Philips

Philips AJ3230/79 Manuale utente

Philips

Philips AJ3115/12 Manuale utente

Philips

Philips AJ110 Manuale utente

Philips

Philips AJ3916/05 Manuale utente

Philips

Philips HF3650 Manuale utente

Philips

Philips AJ3121/79 Manuale utente

Philips

Philips DC390/11 Manuale utente

Philips

Philips AJ560 Manuale utente

Philips

Philips HF3505 Manuale tecnico

Philips

Philips D3996 Manuale utente

Philips

Philips TCJ330 Manuale utente

Philips

Philips AJ560/37 Manuale utente

Philips

Philips HF3521 Manuale utente

Philips

Philips HF367 Series Manuale utente

Philips

Philips HR5886/00 Manuale utente

Philips

Philips HF3520/02 Manuale utente

Philips

Philips HF367X series Manuale utente

Philips

Philips HF3500/60 Manuale utente

Philips

Philips AJ3120/79 Manuale utente

Philips

Philips HF3508 Manuale utente

Philips

Philips HF3520 series Manuale operativo

Philips

Philips AJ3112/12 Manuale utente

Manuali Sveglia popolari di altre marche

Steren

Steren CLK-210 Manuale utente

COP-USA

COP-USA ALCDVR32-SL Manuale utente

Casio

Casio PQ-70 Manuale utente

iHome

iHome IA63 Manuale utente

Coopers

Coopers 9765 Manuale utente

ANJANK

ANJANK AC-190 Guida

TFA

TFA 98.1075 Manuale utente

Sharper Image

Sharper Image 204050 Manuale utente

Lumie

Lumie Zest Manuale utente

Dexford

Dexford RCT200 Manuale utente

RST

RST Q754 Manuale utente

iHome

iHome iKT50 Manuale utente

Sony

Sony dash HID-B7 Manuale utente

SVINZ

SVINZ SCC009 Manuale utente

Clas Ohlson

Clas Ohlson 918863 Manuale utente

IKEA

IKEA FNURRA Manuale utente

Timex

Timex T128 Manuale utente

Gro Company

Gro Company groclock Istruzioni operative