Philips Analogue monitor SCD450 Manuale utente

SCD450

User manual 4

Mode d’emploi 20

Instrucciones de manejo 36

Bedienungsanleitung 52

Gebruiksaanwijzing 68

Istruzione per l’uso 84

Manual de utilização 100

Od  116

Bruksanvisning 132

Vejledning 148

Bruksanvisning 164

Käyttööhje 180

Kullanım talimatları 196

A. Baby unit

B. Large parent

unit

C. Small parent

unit

A. Baby unit

A-1 ON/OFF button

A-2 Nightlight

A-3 DC 9V ——<<++power supply jack

A-4 AC power adapter

A-5 Power plug

A-6 Microphone

A-7 POWER light

A-8 Microphone sensitivity switch

A-9 Channel selection switch

A-10 Battery compartment cover

B. Large parent Unit

B-1 Sound LEVEL lights

B-2 Loudspeaker

B-3 LINK light

B-4 AC power adapter

B-5 Power plug

B-6 DC 9V ——<<++power supply jack

B-7 LINK alarm switch

B-8 Channel selection switch

B-9 ON/OFF switch / VOLUME control

B-10 POWER light

B-11 Battery compartment cover

C. Small parent Unit

C-1 Sound LEVEL lights

C-2 Loudspeaker

C-3 AC power adapter

C-4 Power plug

C-5 Charging base

C-6 Charging light

C-7 DC 9V ——<<++power supply jack

C-8 Channel selection switch

C-9 LINK light

C-10 ON/OFF switch / VOLUME control

C-11 POWER light

C-12 LINK alarm switch

C-13 Battery compartment cover

C-14 Rechargeable battery pack

C-15 Belt clip

EN Legend of functions

D.What else you’ll need

– Coin (to open the battery compartment of the baby unit)

– Small, flat screwdriver (to set the channel selection switches)

– 4 x 1,5V AA batteries for the baby unit

(optional, we recommend Philips Alkaline batteries)

– 4 x 1,5V AA batteries for the large parent unit

(optional, we recommend Philips Alkaline batteries)

Legend of functions

3 Illustrations

4 Legend of functions

4 Baby unit

4 Large parent unit

4 Small parent unit

5 What else you need

6 Contents

7 Welcome

7 Safety information

7 Getting your baby monitor ready

7 Baby unit

8 Large parent unit

9 Small parent unit

9 Using your baby monitor

10 Features

10 Avoiding interference (channel selection)

12 Adjusting microphone sensitivity

12 Monitoring baby silently

12 Switching the nightlight on and off

13 Switching the LINK alarm on and off

14 Connecting / disconnecting the belt clip

(small parent unit)

14 Troubleshooting

16 Frequently asked questions

17 Technical specifications

18 Important information

18 Replacing the battery pack (small parent unit)

19 Environmental information

19 Maintenance

19 Need help?

EN Contents

Philips is dedicated to produce caring, reliable products to give parents the reassurance they

need.With this baby monitor you can hear your baby from where ever you are in and around

your house.With sixteen different channels options you will experience minimal interference.

Philips Baby Care, taking care together

Safety information

Please read this user manual carefully before using your baby monitor and keep it for future

reference.This baby monitor is intended as an aid. It is not a substitute for responsible and

proper adult supervision and should not be used as such.

• Make sure the baby unit and adapter cable are always out of reach of the baby

(at least 1 meter / 3 feet away).

• Never place the baby unit inside the baby’s bed or playpen.

• Never cover the baby monitor (with a towel, blanket, etc.).

• Never use the baby monitor in moist places or close to water.

• Check if the voltage indicated on the type plate of the adapters (A-4, B-4, C-3) correspond to

the local power voltage before connecting to the AC power supply.

• Do not expose the baby monitor to extreme cold, heat or light (e.g. direct sunlight).

• To prevent electric shock, do not open the inside of the baby unit and parent units

(except for the battery compartment covers)

• The antennas on all three units are fixed; do not try to extend them.

Welcome

Getting your baby monitor ready

Baby unit

The baby unit can be mains or battery operated.

When batteries are installed, you have an automatic back up in

case of mains failure.

Mains operated use

1Connect the power adapter cord to the power supply jack

(DC 9V ——<<++- A-3) of the baby unit.

2Connect the AC power adapter (A-4) to a wall outlet.

➜The baby unit is now ready for mains operated use.

Battery operated use

1Remove the battery compartment cover (A-10) of the baby

unit, using a coin.

2Insert four 1,5V AA batteries, noting the + and –

configuration inside the battery compartment (batteries are

not supplied, we recommend Philips Alkaline batteries).

3Close the battery compartment cover (A-10), using a coin

➜The baby unit is now ready for battery operated use.

Large parent unit

The large parent unit can be mains or battery operated.When

batteries are installed, you have an automatic back up in case of

mains failure.

Mains operated use

1Connect the power adapter cord to the power supply jack

(DC 9V ——<<++- B-6) of the parent unit.

2Connect the AC power adapter (B-4) to a wall outlet.

➜The large parent unit is now ready for mains

operated use.

Battery operated use

1Open the parent unit’s battery compartment, using a

screwdriver and slide down the cover (B-11).

2Insert four 1,5V AA batteries, noting the + and –

configuration inside the battery compartment (batteries are

not supplied, we recommend Philips Alkaline batteries).

3Slide the battery compartment cover (B-11) back in place

until it clicks in position and close the compartment, using a

screwdriver.

➜The large parent unit is now ready for battery

operated use.

EN Getting your baby monitor ready

Small parent unit

A rechargeable battery pack has already been installed in the

small parent unit.

1Connect the power adapter cord to the power supply jack

(DC 9V ——<<++- C-7) of the charging base (C-5).

2Connect the AC power adapter (C-3) to a wall outlet.

3Place the parent unit in the charging base (C-5).

> The charging light (C-6) lights up red.

4Leave the parent unit in the charging base (C-5) until the

batteries are fully charged (at least 14 hours).

> When the batteries are fully charged, the charging light

(C-5) will gradually dim.The parent unit can now be taken

out of the charging base and used cordlessly for up to

10 hours.

> When the POWER light (C-11) flashes red, battery power

is low. Place the parent unit in the charging base (C-5) to

recharge the batteries.

➜The small parent unit is now ready for use!

Getting your baby monitor ready

Using your baby monitor

1Position all three units in the same room to test the

connection. Make sure the baby unit is at least 1 meter /

3 feet away from the parent units.

2Press the ON/OFF button (A-1) to switch on the baby unit.

> The POWER Light (A-7) lights up green.

3Switch on the parent units using the ON/OFF switches

(B-9, C-10) and adjust the volume to the level you prefer

using the VOLUME controls (B-9, C-10).

> The POWER lights (B-10, C-11) light up green.

> When connection has been established between the units,

the LINK lights (B-3, C-9) on the parent units light up

green.

4Position the baby unit at least 1 meter / 3 feet away from

your baby.

5Position the parent units at the desired place within the

operating range of the baby unit but at least 1 meter / 3 feet

away from the baby unit. For more information on the

operating range see ‘Technical specifications’.

> When your baby makes sounds, this will be heard on both

parent units.

➜Your can now monitor you baby!

EN Using your baby monitor

Features

Avoiding interference (channel selection)

Always make sure that the CHANNEL selection switches

(A-9, B-8, C-8) inside the battery compartments on all units are

set to the same position!

With the CHANNEL selection switches (A-9, B-8, C-8) you can

select sixteen different channel positions. If you experience

interference from other baby monitors, radio devices, etc. select

a different channel.

Altri manuali per Analogue monitor SCD450

Questo manuale è adatto per i seguenti modelli

Indice

Lingue:

Altri manuali Philips Baby monitor

Philips

Philips AVENT SCD505 Manuale utente

Philips

Philips AVENT SCD710 Manuale utente

Philips

Philips Avent DECT baby SCD498 Manuale utente

Philips

Philips SBCSC467/00 Manuale utente

Philips

Philips SCD570 Manuale utente

Philips

Philips SBCSC490/00 Manuale utente

Philips

Philips AVENT SCD860 Manuale utente

Philips

Philips SCD589 Manuale utente

Philips

Philips Avent SCD730 Manuale utente

Philips

Philips AVENT SCD525/00 Manuale utente

Philips

Philips SKM7488NC/84 Manuale utente

Philips

Philips AVENT SCD860/26 Manuale utente

Philips

Philips SBC SC 477 Manuale utente

Philips

Philips AVENT SCD620/78 Manuale utente

Philips

Philips AVENT SCD731 Manuale utente

Philips

Philips AVENT SCD860 Manuale utente

Philips

Philips SBCSC463/00 Manuale utente

Philips

Philips Avent SCD506 Manuale utente

Philips

Philips AVENT SCD503 Manuale utente

Philips

Philips SCD450/79 Manuale utente

Philips

Philips AVENT SCD525/00 Manuale utente

Philips

Philips AVENT SCD620/52 Manuale utente

Philips

Philips SCD560 Manuale utente

Philips

Philips SBCSC478/00 Manuale utente

Manuali Baby monitor popolari di altre marche

Motorola

Motorola MBP15 Manuale utente

Oricom

Oricom Babysense 7 Manuale utente

Levana

Levana TW502 Manuale utente

Luvion

Luvion Essential Manuale utente

NUK

NUK Eco Control Video Display 550VD Manuale utente

Lorex

Lorex sweet peek mini Manuale utente

Mondevices

Mondevices MonBaby 2 Manuale utente

Famidoc

Famidoc FDBB-V2 Manuale utente

Graco

Graco iMonitor 2797 Manuale utente

babymoov

babymoov High Care A014001 Manuale utente

Ramili

Ramili RV1000 Manuale utente

Swann

Swann SW231-FLO Manuale utente

Badabulle

Badabulle Baby Online 300 m+ Manuale utente

Philips AVENT

Philips AVENT SCD526/00 Manuale utente

Uniden

Uniden Guardian UBR223 Manuale utente

Summer

Summer Day & Night 28470A Manuale utente

Ivation

Ivation Wireless Monitoring System Manuale utente

Levana

Levana Lila Manuale utente