Philips AVENT SCD603/01 Manuale utente

SCD603

Always here to help you

www.philips.com/welcome

2 General description

•I Parent unit

1 Antenna

2 Battery/power-on light

3 Voice activation light

4 Brightness adjustment buttons

5 Video display - icon explanation

•a. Parent unit and baby unit are not

linked

•b. Battery status

•c. Signal strength symbol

•d.Volume level bar

•e. Brightness level bar

•f. Lullaby numbers

•g.‘Repeat lullaby’ symbol

•h.Voice activation symbol

•i.Volume muted symbol

6 Volume up and down buttons

7 Sound level lights

8 Socket for appliance plug

9 Loudspeaker

10 Battery compartment lid

11 Belt clip/stand

12 On/off button

13 Voice activation button

14 Lullaby play/stop button

15 Next lullaby button

16 Rechargeable battery

17 Adapter

18 Appliance plug

•II Baby unit

1 Antenna

2 Power-on light

3 Microphone

4 Lens

5 Loudspeaker

6 Base

7 Nightlight and nightlight button

8 Wall-mounting holes

9 Battery compartment lid

10 Socket for appliance plug

11 On/off switch

12 Appliance plug

13 Adapter

Table of contents

1 Introduction 3

2 General description 3

3 Preparing for use 4

4 Using the appliance 6

5 Features 8

6 Cleaning and maintenance 12

7 Storage 12

8 Ordering accessories 12

9 Guarantee and service 12

10 Frequently asked questions 12

1 Introduction

Congratulations on your purchase and welcome

to Philips AVENT! To fully benet from the

support that Philips AVENT offers, register your

product at www.philips.com/welcome.

The Philips AVENT video monitor provides you

with round-the-clock support and it allows you

to see your baby day and night from anywhere in

the house.The latest digital technology guarantees

clear sound and the clearest image of your baby.

This gives you an additional sense of security

without entering your baby’s room and disturbing

its sleep.

ENGLISH

BWarning:

Unplug the baby unit and make sure your hands

and the unit are dry when you insert non-

rechargeable batteries.

DNote:

The baby unit has an operating time of 3 hours

when you use it on non-rechargeable alkaline

batteries with the night light switched on.

1 Remove the battery compartment lid.

2 Insert four non-rechargeable alkaline batteries.

DNote:

Make sure the + and - poles point in the right

direction.

3 Reattach the lid.

3 Preparing for use

IMPORTANT: Read the important safety

instructions carefully before you use the

video baby monitor and keep them for

future reference.

Hereby, Philips Electronics UK Limited, declares

that this Baby Monitor is in compliance with

the essential requirements and other relevant

provisions of Directive 1999/5/EC. A copy of the

EC Declaration of Conformity (DoC) is available

on CDROM or from website: www.philips.com/

support.

3.1 Baby unit

Use the baby unit from the mains.To guarantee

automatic power backup in case of mains failure,

we advise you to insert non-rechargeable

batteries.

3.1.1 Mains operation

1 Put the appliance plug in the baby unit and

put the adapter in a wall socket.

3.1.2 Placing the non-rechargeable batteries

In case of mains failure the baby unit can run

on four 1.5V R6 AAA alkaline batteries (not

included).

Do not use rechargeable batteries.The baby

unit does not have a charging function and

rechargeable batteries discharge slowly when they

are not in use.

2 Insert the rechargeable battery.

DNote:

Make sure the + and - poles point in the right

direction.

3 Reattach the lid.

4 Insert the appliance plug into the parent unit

and put the adapter in a wall socket.

•The battery/power-on light on the parent

unit lights up green.The animated battery

charging image appears at the top of the

video display.

3.2 Parent unit

3.2.1 Operation on rechargeable battery

BWarning:

Unplug the parent unit and make sure your

hands and the unit are dry when you insert the

rechargeable battery.

•The parent unit comes with a rechargeable

Li-ion polymer 1100mAh battery.

•Charge the parent unit before you use it

for the rst time or when the parent unit

indicates that the battery is low.

•The battery is low when the empty battery

symbol ashes on the video display and the

battery/power-on light on the parent unit

ashes red.

DNote:

If the battery is completely empty, the parent unit

automatically switches off and loses contact with

the baby unit.

1 Slide down the battery compartment lid to

remove it.

ENGLISH

4 Using the appliance

1 Place the parent unit and the baby unit in the

same room to test the connection.

Make sure the baby unit is at least 1.5 metres

(5 feet) away from the parent unit.

2 Set the on/off switch on the baby unit to

the ON position.

•The green power-on light goes on.

DNote:

The power-on light always lights up green,

even when there is no connection with

the parent unit.

•When the battery is fully charged, the

battery symbol at the top of the video

display is full.

•When you charge the parent unit for

the rst time or after a long period of

disuse, switch it off and let it charge

continuously for at least 4 hours.

•Charging normally takes 2.5 hours, but

it takes longer when the parent unit is

switched on during charging.To keep the

charging time as short as possible, switch

off the parent unit during charging.

•When the rechargeable battery is fully

charged, the parent unit can be used

cordlessly for approx. 7 hours if it is

in voice activation mode. If the video

display is on continuously, the parent unit

can be used cordlessly at default setting

for approx. 5.5 hours.

DNote:

When the parent unit is charged for the rst

time, the operating time is less than 7 hours.The

rechargeable battery only reaches its full capacity

after four discharging and charging cycles.

DNote:

The battery gradually discharges, even when the

parent unit is switched off.

DNote:

We advise you to use the parent unit connected

to the mains during the whole night. If the parent

unit runs out of battery, the low battery alert

beeps and this may wake you up.

4.1 Positioning the baby

monitor

BWarning:

Keep the baby unit out of the reach of the baby.

Never place the baby unit inside or mount it on

the baby’s bed or playpen.

DNote:

If you use a cordless phone, wireless video,Wi-Fi

network, microwave oven or Bluetooth on 2.4Ghz

and you experience interference on either the

parent unit or baby unit, move the parent unit

further away until there is no more interference.

1 For optimal sound detection, place the baby

unit at least 1 metre (3.5 feet) away from your

baby, but no further than 1.5 metres

(5 feet) away.

2 There are two ways to position the baby unit:

1 Place the baby unit on a stable, level and

horizontal surface.

2 Mount the baby unit to the wall as shown

in the gure with the screws supplied.

3 Press and hold the on/off button on the

parent unit.

•The video display goes on and the linking

image appears on the display.

•When a connection has been established,

the baby is shown on the video display and

the signal strength symbol appears.

ETip:

Find out what the best position is for

the parent unit by looking at the signal

strength symbol.The number of stripes

indicates the quality of the connection.

•If no connection can be established, the

parent unit beeps and the out-of-range

image appears on the display.

ENGLISH

For more information on the operating range,

see section ‘Operating range’ below.

4.1.1 Operating range

The operating range of the baby monitor is

150 metres (490 feet) in open air and line of sight.

Indoors the operating range is up to 30 metres

(98 feet). Depending on the surroundings and

other disturbing factors, this range may be smaller.

For wet and moist materials, the range loss may

be up to 100%.

Dry materials Material

thickness

Loss of

range

Wood, plaster, cardboard,

glass (without metal,

wires or lead)

< 30cm

(12in)

0-10%

Brick, plywood < 30cm

(12in)

5-35%

Reinforced concrete < 30cm

(12in)

30-100%

Metal grilles or bars < 1cm

(0.4in)

90-100%

Metal or aluminium

sheets

< 1cm

(0.4in)

100%

5 Features

5.1 Adjusting loudspeaker

volume

You can adjust the loudspeaker volume of the

parent unit to the level you prefer.

1 Press the volume up or down button to adjust

the volume.

ETip:

Use the provided template, to mark the

exact location of the screw holes on the

wall.

ETip:

Position the baby unit at a higher level to get a

good overview of the baby’s bed or playpen.

3 Adjust the baby unit in a way that ensures the

best visibility of your baby.

BWarning:

Do not position the baby unit with the

microphone pointing too far down, as this

may prevent the microphone from picking up

sounds properly.

4 Place the parent unit within the operating

range of the baby unit. Make sure it is at least

1.5 metres (5 feet) away from the baby unit

to avoid acoustic feedback.

DNote:

If the brightness is set to a high level, the parent

unit consumes more power.

5.3 Sound level lights

The parent unit continuously monitors the sound

level in your baby’s room and the sound level

lights let you know if there is any activity. If your

baby cries, the blue sound level lights light up on

the parent unit.

•As long as no sound is detected, the sound

level lights are out.

•When the baby unit picks up a sound, one or

more sound level lights on the parent unit go

on.The number of lights that go on depends

on the loudness of the sound picked up by

the baby unit.The sound level lights also

go on when the parent unit is set to a low

volume or when the voice activation mode is

activated (see section ‘Voice activation’ below).

5.4 Voice activation

The parent unit continuously monitors the

sound level in your baby´s room.When the voice

activation mode is activated, the video display only

switches on when the baby unit picks up a sound.

As long as no sound is detected, the video display

is off to save power.

1 To activate the voice activation mode, press

the voice activation button on the parent unit.

•The volume bar appears on the display to

show the selected volume.

DNote:

If the volume is set to a high level, the parent unit

consumes more power.

5.2 Adjusting display brightness

You can adjust the display brightness of the parent

unit to the level you prefer.

1 Press the brightness adjustment buttons on

the parent unit to adjust the brightness of the

video display.

•The display brightness bar appears on

the display to show the selected display

brightness.

ENGLISH

2 Press the nightlight button again to switch off

the nightlight.

5.6 Lullaby function

1 Press the lullaby play/stop button on the

parent unit to play a lullaby.

•The lullaby starts to play on the baby unit

and is repeated continuously for approx.

15 minutes. On the video display you

see which lullaby number is played and

repeated.This number is shown in a blue

square.

2 To select another lullaby, press the lullaby

button. Continue pressing the ‘next lullaby’

button until you hear the lullaby you prefer.

DNote:

You can also select the repeat symbol to play

all lullabies repeatedly in a loop.

•The voice activation light on the parent

unit goes on and the voice activation image

appears on the video display.

•When the baby unit detects a sound,

the video display on the parent unit

automatically goes on to show the baby.

When no new sound is detected for

20 seconds, the video display goes out again.

2 To deactivate the voice activation mode, press

the voice activation button on the parent unit

again.The voice activation light goes out and

the voice activation off image appears on the

display.

5.5 Nightlight

1 Press the nightlight button on the base of the

baby unit to switch on the nightlight.

•The nightlight on the base of the baby unit

goes on.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Philips Baby monitor

Philips

Philips AVENT SCD713 Manuale utente

Philips

Philips SBC SC 362 Manuale utente

Philips

Philips SCD506/05 Manuale utente

Philips

Philips SKM7489NC/00 Manuale utente

Philips

Philips SCD600/00 Manuale utente

Philips

Philips AVENT SCD843 Manuale utente

Philips

Philips AVENT SCD565 Manuale utente

Philips

Philips SBCSC765 Manuale utente

Philips

Philips SBCSC368/00Y Manuale utente

Philips

Philips AVENT SCD585 Manuale utente

Philips

Philips SCD510/70 Manuale utente

Philips

Philips AVENT SCD831 Manuale utente

Philips

Philips AVENT SCD535 Manuale utente

Philips

Philips SBC SC 366 Manuale utente

Philips

Philips AVENT SCD710 Manuale utente

Philips

Philips SBCSC467/84 Manuale utente

Philips

Philips AVENT SCD501 Manuale utente

Philips

Philips SBCSC769 Manuale utente

Philips

Philips SBC SC468 Manuale del sistema

Philips

Philips SBC SC369/05 Manuale utente

Philips

Philips AVENT SCD860 Manuale utente

Philips

Philips AVENT Manuale utente

Philips

Philips SCD488/05 Manuale utente

Philips

Philips SCD603/00 Manuale utente

Manuali Baby monitor popolari di altre marche

Motorola

Motorola MBP15 Manuale utente

Oricom

Oricom Babysense 7 Manuale utente

Levana

Levana TW502 Manuale utente

Luvion

Luvion Essential Manuale utente

NUK

NUK Eco Control Video Display 550VD Manuale utente

Lorex

Lorex sweet peek mini Manuale utente

Mondevices

Mondevices MonBaby 2 Manuale utente

Famidoc

Famidoc FDBB-V2 Manuale utente

Graco

Graco iMonitor 2797 Manuale utente

babymoov

babymoov High Care A014001 Manuale utente

Ramili

Ramili RV1000 Manuale utente

Swann

Swann SW231-FLO Manuale utente

Badabulle

Badabulle Baby Online 300 m+ Manuale utente

Philips AVENT

Philips AVENT SCD526/00 Manuale utente

Uniden

Uniden Guardian UBR223 Manuale utente

Summer

Summer Day & Night 28470A Manuale utente

Ivation

Ivation Wireless Monitoring System Manuale utente

Levana

Levana Lila Manuale utente