Philips HR2870 Manuale utente
HR2870
2
3
1
4
ENGLISH 6
BAHASA MELAYU 17
INDONESIA 29
TI”NG VI◊T 40
50
58
67
77
HR2870
General description (fig.1)
AFruit filter
BMotor unit
CLow-speed button
DHigh-speed button
ECord storage
FStopper
GBlender beaker lid
HSieve on lid
IBlender beaker
JSealing ring of blender beaker blade unit
KBlender beaker blade unit
LBuilt-in safety lock
MCord
NMill beaker
OSealing ring of mill blade unit
PMill blade unit
QMill/chopper beaker lid
RChopper beaker
SSealing ring of chopper blade unit
TChopper blade unit
Important
Read these instructions for use carefully before using the appliance and
save them for future reference.
◗Check if the voltage indicated on the appliance corresponds to
the local mains voltage before you connect the appliance.
◗Do not use the appliance if the mains cord, the plug or other
parts are damaged.
◗If the mains cord is damaged, it must be replaced by Philips, a
service centre authorised by Philips or similarly qualified persons
in order to avoid a hazard.
◗Always unplug the appliance before assembling, disassembling or
making adjustments to any of the parts.
◗Never immerse the motor unit in water or any other liquid, nor rinse
it under the tap. Use only a moist cloth to clean the motor unit.
ENGLISH6
◗Unplug the appliance immediately after use.
◗Keep the appliance out of the reach of children.
◗Never let the appliance run unattended.
◗Do not exceed the maximum quantities and processing times
indicated in the tables.
◗Let hot ingredients cool down before chopping them or pouring
them into the blender beaker (max. temperature 80cC/175cF).
◗Never reach into the beaker with your fingers or an object while
the appliance is running.
◗If the blades get stuck, unplug the appliance before removing the
ingredients that are blocking the blades.
◗Avoid touching the cutting edges of the blade units when cleaning
them.They are very sharp and you could easily cut your fingers
on them.
◗Always unplug the appliance before you start cleaning the motor
unit.
◗Never use any accessories or parts from other manufacturers or
that have not been specifically advised by Philips.Your guarantee
will become invalid if such accessories or parts have been used.
◗Never use the parts to switch the appliance on and off.
◗Assemble the appliance properly before putting the plug in the
wall socket.
◗In order to avoid a hazardous situation, this appliance must never
be connected to a timer switch.
◗This appliance is intended for household only.
Safety features
Built-in safety lock
This feature ensures that you can only switch the appliance on when
the parts have been placed on the motor unit in the correct position.
When the parts have been assembled correctly, the built-in safety lock
will be unlocked.
ENGLISH 7
Thermal cut-out
The appliance is equipped with a thermal cut-out that automatically
cuts off the power supply to the appliance if it overheats.
◗If the appliance suddenly stops running:
1Pull the plug out of the wall socket.
2Let the appliance cool down for 30 minutes.
3Put the plug in the wall socket.
4Switch the appliance on again.
Contact your Philips dealer or an authorised Philips service centre if the
thermal cut-out is activated too often.
In order to avoid a hazardous situation due to inadvertent resetting
of the thermal cut-out, this appliance must never be connected to a
timer switch.
Before first use
1Wash all detachable parts (see chapter 'Cleaning').
Using the appliance
Blender
The blender is intended for:
- Blending fluids, e.g. dairy products, sauces, fruit juices, soups, mixed
drinks, shakes.
- Mixing soft ingredients, e.g. pancake batter.
- Pureeing cooked ingredients, e.g cooked beans, preparing baby
food.
Avoid touching the sharp blades. If the blades get stuck, unplug the
appliance and remove the ingredients that are blocking the blades
with a spatula.
1Attach the blender blade unit to the blender beaker (1). Fix it by
turning it in the direction of the arrow (2) (fig. 2).
ENGLISH8
◗Make sure the rubber ring has been placed properly on the
blender blade unit.
2Put the ingredients in the beaker (fig. 3).
Do not fill the beaker beyond the MAX indication.
See the table for the recommended quantities.
Never fill the beaker with ingredients that are hotter than 80cC.
3Place the blender beaker on the motor unit (1). Fix the beaker by
turning it in the direction of the arrow (2) ('click') (fig. 4).
Be careful not to exert too much pressure on the beaker.
4Put the lid on the beaker (1). Make sure that the sieve is located
in front of the spout (2) (fig. 5).
5Place the stopper into the opening in the lid (1) and turn it until
it is firmly fixed (2) (fig. 6).
To avoid spillage, always insert the stopper into the lid before you
start processing.
6Put the plug in the wall socket and switch on the appliance by
pressing the low-speed or high-speed button.
7Hold the motor unit firmly with both hands when operating the
appliance. Do not operate the appliance longer than 1 minute at a
time. If you have not finished blending after 1 minute, switch the
appliance off and wait 1 minute before you continue using it.
ENGLISH 9
Quantities
200 g
200 g
200 g vegetables + water (optional)
150 g fruit + 250 ml milk
75 g almonds + 200 ml water + 25 g rice
(soaked for 1 hour)
75 g black sesame seeds + 200 ml water
+ 25 g rice (soaked for 1 hour)
Ingredients blender
Fruit
Vegetables
Vegetable juice
Milkshake
Almond tea
Black sesame tea
If the appliance becomes hot, let it cool down before you
continue using it.
Never reach into the beaker with your fingers or an object (e.g. a
spatula) while the blender is running.
Tips
◗If the ingredients stick to the wall of the blender beaker, switch
the appliance off and loosen the ingredients from the wall with a
spatula (fig. 7).
◗To avoid spillage, never fill the beaker above the MAX indication
(0.6 litres).
◗Cut solid ingredients into smaller pieces (1-2 cm) before putting
them in the blender beaker. Do not process a large quantity of
solid ingredients at the same time. Process these ingredients in a
series of small batches instead.
◗Liquid ingredients (e.g. oil) can be poured into the blender beaker
through the opening in the lid while the appliance is running (fig. 8).
Mill
◗The mill is intended for grinding dry ingredients (fig. 9).
The mill is not suitable for chopping very hard ingredients, such as
nutmeg.
Avoid touching the sharp blades. If the ingredients stick to the blade
unit or the wall, remove the mill beaker from the motor unit by
turning it in the direction opposite to that indicated by the arrow,
and shake until the ingredients get loose.
1Put the dry ingredients in the mill beaker (fig. 10).
Do not fill the mill beaker beyond the MAX indication.
See the table for the recommended quantities.
2Screw the mill blade unit (which has two blades) onto the mill beaker
(1). Fix it by turning it in the direction of the arrow (2) (fig. 11).
◗Make sure the rubber ring has been placed properly on the mill
blade unit.
ENGLISH10
Altri manuali per HR2870
2
Indice
Altri manuali Philips Miscelatore
Philips
Philips HR2109/30 Manuale utente
Philips
Philips HR1604 Manuale utente
Philips
Philips HR3868/01 Manuale utente
Philips
Philips HR1652 Manuale utente
Philips
Philips HR2800/50 Manuale utente
Philips
Philips HR1640/00 Manuale utente
Philips
Philips HR1316/00 Manuale utente
Philips
Philips HR1680/00 Manuale utente
Philips
Philips HR1600 Manuale utente
Philips
Philips HR1614 Manuale utente
Philips
Philips Walita RI1774 Manuale utente
Philips
Philips HR1365 Manuale utente
Philips
Philips HR3020 Manuale utente
Philips
Philips HR1365 Manuale utente
Philips
Philips HR2062 Manuale utente
Philips
Philips HR1617/90 Manuale utente
Philips
Philips HR1375 Manuale utente
Philips
Philips HR1367/02 Manuale utente
Philips
Philips HR3752 Manuale utente
Philips
Philips HR1378 Manuale utente
