Philips SCF205/34 Manuale utente
Baby bottle warmer
SCF 215
2
3
1
4
SCF 215
ENGLISH 6
DANSK 12
DEUTSCH 18
25
ESPAÑOL 32
SUOMI 39
FRANÇAIS 45
ITALIANO 52
NEDERLANDS 59
NORSK 66
PORTUGUÊS 72
SVENSKA 79
TÜRKÇE 85
6
Introduction
Congratulations on your purchase of the Philips Baby Bottle Warmer.The
Philips Baby Bottle Warmer is designed to heat food quickly and to keep
it warm. It is tted with a new temperature control system (PTC) that
meets the highest safety requirements.The click-step control knob allows
you to always set the correct food temperature.Thanks to its unique
design the Philips Baby Bottle Warmer ts all bottles and jars of baby
food.The Philips Baby Bottle Warmer is a high-performance product that
warms both bottles and jars of baby food, and belongs to a complete
range of Philips Baby-Care products.
Philips Baby-Care, Taking Care Together!
These instructions for use are applicable for two Philips Baby Bottle
Warmermodels:
Model SCF205; For use at home.
Model SCF215; For use at home and in the car (with extra car adapter).
Note: Please read these instructions carefully and retain for future
reference.
General description (Fig. 1)
1 Bottle and jar lifter
2Hand grips
3Mains plug
4Click-step control knob
5Indicator lamp
6Rim
7Container
8Cable reservoir
9Car adapter
Installation
For use at home
Before connecting the Baby Bottle Warmer to the mains, check to ensure
that the mains outlet is 230V AC.
ENGLISH
1 Place the Baby Bottle Warmer out of the reach of children and on a
dry, non-slip, horizontal surface.
2 Turn the click-step control knob 4 to the mposition.
3 Unreel the required cable length from the cable reservoir 8 and
plug into the mains outlet.
For use in the car
1 Place the Baby Bottle Warmer out of the reach of children and on a
dry, non-slip horizontal surface.
2 Turn the click-step control knob 4 to the mposition.
3 Connect the car adapter 9 to the mains plug 3.
4 Unreel the required length of cable from the cable reservoir 8 and
connect the car adapter to the cigarette lighter socket of the car.
(12V DC).
Notes:
Never use the Baby Bottle Warmer when the car is in motion.
Never use the Baby Bottle Warmer without water in it.
Only use the Baby Bottle Warmer when the ambient temperature is
between +7 cC and +37 cC.
Caution: Change the water in the bottle warmer often for hygienic
reasons.
Operation
Warming of baby bottles
1 Turn the click-step control knob 4 to the mposition.
2 Placethebottleinthecontainer7andllthespacebetweenthe
bottle and the inner container with water up to two centimeters
fromtherim6.Forsmallerbottleslluptojustabovethemilkline
in the bottle.
3 Set the required temperature using the click-step control knob.
The indicator lamp lights to indicate the heating operation.
-
-
-
ENGLISH 7
After approximately 8 minutes the milk will have reached just the right
temperature for your baby.The indicator lamp goes out.The indicator
lamp then switches on and off intermittently to indicate the thermostat is
controlling the temperature of the water.
4 Remove the bottle from the container and turn the control knob
to the mposition.
5 Shake the bottle a little to distribute the heat evenly before you
allow your baby to drink.
Notes:
Always check that the contents of the bottle are at the correct
temperature by pouring a few drops on the back of your hand.
The heating of baby food depends not only on the temperature
setting but also on the initial temperature of the food and water, the
wall thickness of the glass and the amount and consistency of the
food.The symbol “BOTTLE” is an indication for rapid warming up.
After a short while you will nd the best setting to obtain the ideal
temperature for your baby’s food. Our information is based on
warming 200ml milk from 20 cC up to 37 cC.
Warming of baby food jars
1 Removethelabelandlidfromthejar.
2 Turn the click-step control knob 4 to the mposition.
3 Placethejarinthecontainer7usingthelifterandllthespace
betweenthejarandtheinnercontainerwithwateruptotwo
centimetresfromtherim6.Forsmalljarsll-uptojustbelowthe
topofthejar.
4 Settheclick-stepcontrolknobtothe“jar”symbol.
The indicator lamp lights to indicate that the thermostat is working.
5 Usetheliftertostirthecontentsofthejarfrequentlyformore
rapid distribution of heat.
After approximately 12-15 minutes (depending on the consistency of
food) the food will have reached just the right temperature for your baby.
The indicator lamp goes out.
-
-
ENGLISH8
6 Removethejarfromthecontainerandturnthecontrolknobto
the mposition.
Note: Always check that the contents of the jar are at the correct
temperature, by testing some on the back of your hand.
Keeping warm
With the Baby Bottle Warmer you can also keep the bottles and jars
warm for a short time.To do this set the control knob to position v.The
thermostat ensures that the set temperature is maintained. For
microbiological and hygienic reasons baby food should never be kept
warm for longer than one hour.
Operation in the car
Follow the same instructions as mentioned above.
Note: For quickly warming up baby food in bottles and jars, adjust the
click-step control knob to the “jar” symbol. Because the car battery is now
being used instead of the mains supply, the time required for warming up
may be slightly longer.
Warning: Prolonged use of the Baby Bottle Warmer (several hours) can
weaken your car battery.
Maintenance
Cleaning
Disconnect the Baby Bottle Warmer from the mains (or the cigarette
lighter socket) and allow it to cool down. Clean the container and the
outside of the Baby Bottle Warmer with a damp cloth.
Notes:
Never immerse the Baby Bottle Warmer in water.
Do not use cleaning or scouring agents.
The type plate is located at the bottom of the product.
Warning: If a fault occurs, consult your dealer or Philips’ service centre.
Under no circumstances should you try to repair the unit yourself, as this
would invalidate the warranty.
-
-
ENGLISH 9
Guarantee & service
Guarantee & service If you need information or if you have a problem,
please visit the Philips website at www.philips.com or contact the Philips
Customer Care Centre in your country (you will nd its phone number
in the worldwide guarantee leaet). If there is no Customer Care Centre
in your country, turn to your local Philips dealer or contact the Service
Department of Philips Domestic Appliances and Personal Care BV.
Model SCF205 Model SCF215
Power supply
(mains)
230V AC 230V AC
Power consumption
(mains)
100 Watts 90 Watts
Power supply (car
battery)
- 12V DC
Power consumption
(car battery)
- Power consumption
(car battery)
Operational
ambient
temperature
between +7 cC
and +37 cCbetween +7 cC and +37 cC
ENGLISH10
Questo manuale è adatto per i seguenti modelli
1
Indice
Lingue:
Altri manuali Philips Scalda biberon
Philips
Philips HD4331/01 Manuale utente
Philips
Philips SCF355/05 Manuale utente
Philips
Philips SCF355 Manuale utente
Philips
Philips AVENT SCF358 Manuale utente
Philips
Philips SCD278/00 Manuale utente
Philips
Philips AVENT scf356 Manuale utente
Philips
Philips AVENT SCF358 Manuale utente
Philips
Philips SCF250/00 Manuale utente
Philips
Philips AVENT SCF66 Series Manuale utente
Philips
Philips SCF215/86 Manuale utente
Philips
Philips AVENT SCF358 Manuale utente
Philips
Philips SCF355 Manuale utente
Philips
Philips SCF355 Manuale utente
Philips
Philips AVENT SCF358 Manuale utente
Philips
Philips SBCSC205/34U Manuale utente
Philips
Philips SCF355 Manuale utente
Philips
Philips SCF255/51 Manuale utente
Philips
Philips AVENT SCF356/00 Manuale utente
Philips
Philips AVENT scf356 Manuale utente
Philips
Philips AVENT SCF355/07 Manuale utente
