Philips DCR 2020 Manuale utente
DCR 2020
Benutzerhandbuch
70
DE
User manual
36
EN
Handleiding
2
NL
DCR 2020_indice1 1/09/05 15:26 Page 1
36
EN
Meaning of symbols
02
Important information:
Must be read and understood.
Your product has been designed and manufactured with high quality materials and
components, which can be recycled and reused.
When this crossed-out wheeled bin symbol is attached to a product or his
packaging, it means the product is covered by European Directive 2002/96/EC.
Please inform yourself about the local separate collection system for electronic
products.
Please act according to your local rules and do not dispose of your old products
with your normal household waste.The correct disposal of your old product will
help prevent potential negative consequences for the environment and human
health.
The “Material recyclability symbol” affixed on package cardboard and user manual
means these parts are recyclable.
So do not dispose of them with your normal household waste.
The “Material recyclability symbol” affixed on plastic packaging parts means these
parts are recyclable.
So do not dispose of them with your normal household waste.
The “Green Dot” affixed on cardboard means PHILIPS pays a financial duty to the
“Avoidance and Recovery of Packaging Waste” organization.
DCR 2020_indice1 1/09/05 15:26 Page 36
37
EN
Your receiver has been manufactured to meet the appropriate safety
standards, but the instructions below must be followed to operate it safely.
These instructions must be kept for future reference.
-Before connecting the receiver to the mains, check that the mains supply voltage
corresponds to the voltage printed on the rear of the receiver. If the mains voltage
is different, consult the dealer.
-The receiver does not contain any user-serviceable parts.All maintenance work
must be carried out by qualified personnel.
-If you disconnect the receiver from the mains, make sure to unplug it from the wall
socket and not just from the AC socket at the back of the unit. Children could
seriously injure themselves, as the free end of the cable is still alive.
-Unplug the receiver during lightning storms.
-To prevent fire or shock hazard, do not expose this equipment to rain or moisture.
-The receiver should be placed on a firm surface, and the ventilation openings must
not be covered with items, such as newspapers, table clothes, curtains, etc.
-Do not install the receiver near any heat sources such as radiators, stoves or other
apparatus that produce heat. Protect it from direct sunlight.
-When installing the receiver, ensure there is a gap of approximately 2.5 cm around
the receiver to enable air to circulate freely and prevent overheating.
-Leave accessible the mains connector at the back of the unit in case emergency
shutdown is required.
-Do not place anycombustible objects on the receiver (candles, etc.).
-No objects filled with liquids, such as vases, shall be placed on the unit.The receiver
shall not be exposed to dripping or splashing. Should this happen, disconnect your
receiver from the mains and consult your dealer.
-Makesurethat children do not place any foreign objects in any of the openings.
-For cleaning, use a soft, damp (not wet) cloth. Never use any abrasive cloth and
aerosol cleaners.
Safety instructions
DCR 2020_indice1 1/09/05 15:26 Page 37
EN As you unpack your terminal, make sure the following accessories are included:
-1xRemote Control Unit
-2xAA batteries
-1xSCART Cable
-1xPower Cord
-1xAntenna Cord type F-IEC
-1xAdapter F male-IEC female
-1xSticker to be put on your smart card
-1xLeaflet explaining what to do with the adapter and sticker mentioned above
-1xUser Manual
-1xWorldwide Warranty booklet
Plastic bags can be dangerous.To avoid suffocation keep the bag away from
babies and children.
Refer to the safety section before connecting your terminal.
1Disconnect your TV set and recorder from the mains.
2Screw the adapter supplied with your receiver on the “RF IN” connector of the
rear panel.
3Integrate your terminal in your existing installation as shown on the diagram.
Unpacking the receiver
Quick installation guide
to AC outlet
PHILIPSPHILIPS
TV set
VCR/DVD
Cable Receiver
IN FROM ANT
OUT TO ANT
EXT 1
EXT 1 EXT 2
EXT 2
Cable Wall socket
For optimumconfiguration
38
DCR 2020_indice1 1/09/05 15:26 Page 38
4To avoid incorrect insertion of the smart card in the
slot, make sure you affix the reminder sticker
supplied with your receiver on the smart card so as
to cover the following text:“Deze zijde boven” (on
the side that has no chip).
5Insert your smart card in your receiver with the
golden or silver contacts facing up.
6Insert the two batteries supplied in your remote
control.
Batteries are removable from the remote using
common household tools (like a screwdriver,…).
The batteries supplied do not contain hazardous
substances such as Mercury, Cadmium, or Lead.
However, they must not be disposed of with your
household waste but to a local separate collection
system.
7Reconnect your TV set and recorder to the mains.
Do not connect your receiver yet!
8Switch on your TV set and select a channel.
9Plug the receiver’s power cord to the mains.The
welcome screen appears, then the First installation
screen.
10 Set your favourite menu language and press OK.
11 Set appropriate values for the following:
•Network ID: applicable network ID as indicated
by your operator. Please see operator booklet for
the right decimal value to be entered for your
region.
•Frequency: broadcast frequency predefined or
entered manually as indicated by your operator
(please see operator booklet).
•Symbol Rate: predefined value, which should not
be modified unless requested by your operator
•Modulation: predefined modulation type, which
should not be modified unless requested by your
operator
Symbol rate and modulation may be modified
manually upon request by your operator.
12 Press OK to start scanning for channels.
When scanning has been successfully completed, a
completion message is displayed, and then the receiver
tunes to the first channel in the list.
39
EN
DCR 2020_indice1 1/09/05 15:26 Page 39
40
EN 36 Meaning of symbols
37 Safety instructions
38 Quick installation guide
38 Unpacking the receiver
42 Introduction
43 Product description
43 Front panel
44 Rear panel
45 Remote control
46 Inserting your Smart Card
47 Connecting your receiver
47 Connecting to TV and VCR/DVD player using
SCART Support
48 Connecting to your audio equipment
49 First installation
49 First installation settings
49 Channel scanning
50 Scanning failure
51 General Viewing Functions
51 Receiver wakeup
51 Channel selection
52 Channel banner
52 Channel Lists
52 TV or Radio mode selection
53 Volume & Audio Control
53 Recording timers
55 Guide (Electronic Programme Guide)
Contents
DCR 2020_indice1 1/09/05 15:26 Page 40
41
EN
56 Settings
56 Menu
56 Favourites lists
59 Conditional access
60 User preferences
61 Setup
62 System information
63 Menu Tree
64 More about recording
(VCR or DVD control)
64 Connection for Easy Recording
65 Digital receiver and VCR or DVD settings
65 Recording with the VCR control feature
66 Troubleshooting
68 Technical specifications
DCR 2020_indice1 1/09/05 15:26 Page 41
42
EN Welcome to digital television!
The Philips Digital Cable Receiver DCR 2020 allows you to view a wide variety of
free-to-air and scrambled channels with the best digital picture and sound quality.
With this product you can enjoy advanced functions and features including:
-Digital picture and sound quality
-Wide screen format
-TV SCART and VCR/DVD SCART connector
-Up to 500 presets for TV and Radio channels
-Easy installation and use through the well-tested Euphoria User Interface
-Personal channel list and favourite lists
-Electronic Programme Guide
This user manual covers the installation of your receiver and the necessary steps to
use the various functions, so you can optimally enjoy every feature.
Lucas Covers, CEO BLC Digital Video STB
Paris, July 2005
Introduction
DCR 2020_indice1 1/09/05 15:26 Page 42
Front panel
1Smart Card slot: .......................see chapter Inserting your Smart Card
2U........................................... channel +
3I........................................... channel -
4........................................... mute/demute
5........................................... ON/”low power”
The front panel button hides the remote control receiver window and includes
twoLEDs indicating the receiver status. One of the LEDs blinks at remote control
command reception.
If the red LED is blinking continuously, it indicates that an upgrade of your terminal
software is taking place. Do not interrupt this operation.Wait for the green LED to
light up, indicating successful upgrade, and then continue as normal.
Receiver operating mode LED1LED2
Low Power red off
Standby off red
Running in TV mode off green
Running in Radio mode off orange
TV recording in progress red green
Radio recording in progress red orange
Recording ongoing during standby red red
Download in progress blinking red off
43
EN
Product description
Q T
W RE
DCR 2020_indice1 1/09/05 15:26 Page 43
44
EN
Rear panel
1230V~50Hz 10W max (**): ........ Socket used to connect the power cord.
2RF OUT (*): ............................ RF output used to connect your receiver to a
VCR/TV set to watch analogue channels only,
or to connect another receiver using the
adapter supplied with your receiver.
3RF IN (*): ............................... RF input used to connect the cable from the
wall socket. Refer to chapter Connecting your
receiver.
4TV (*): ................................... SCART (1)socket used to connect to your TV
set.
5VCR (*): ................................. SCART (1)socket used to connect your video
recorder or DVD player/recorder.
6L/R (*): ................................... Left/Right analogue audio cinch outputs used to
connect your HiFi/audio receiver system.
7SPDIF (*): ............................... Digital audio cinch output used to connect
your HiFi/audio receiver system.
8SERIAL (*): .............................. RS232 socket used for serial data transfer.
The label showing the type and serial number is underneath the receiver.
(1)SCART is also called Euroconnector or Peritel.
*Safety Extra Low Voltage
** Hazardous Voltage
WT
Q E R
Y U I
DCR 2020_indice1 1/09/05 15:26 Page 44
Indice
Altri manuali Philips Lettore DVD
Philips
Philips DVP5140K/03 Manuale utente
Philips
Philips DVP3005K/93 Manuale utente
Philips
Philips GoGear SA5125 Manuale utente
Philips
Philips DVP3254K Manuale utente
Philips
Philips DVP3600X/77 Manuale utente
Philips
Philips DVP3850/58 Manuale utente
Philips
Philips DVD756 Manuale utente
Philips
Philips MCD139B/55 Manuale utente
Philips
Philips DVD724 Manuale utente
Philips
Philips DVP5120KX Manuale utente
Philips
Philips DVP3620 Manuale utente
Philips
Philips DVP3126K Manuale utente
Philips
Philips DVP3360K/51 Manuale utente
Philips
Philips DVDQ40 Manuale utente
Philips
Philips DVP3858X/94 Manuale utente
Philips
Philips PET835 Manuale utente
Philips
Philips DVP3750 Manuale utente
Philips
Philips DVP3570/F Manuale utente
Philips
Philips DVD750/05 Manuale utente
Philips
Philips DVDR615 Manuale utente
