Philips BASS+ SHB4385 Manuale utente

SHB4385

BASS+

User manual

www.philips.com/support

1EN

Contents

1 Important safety instructions 2

Hearing Safety 2

General information 2

2 Your Bluetooth wireless

headset 3

What's in the box 3

Other devices 3

Overview of your Bluetooth

wireless headset 4

3 Get started 5

Charge the battery 5

Pair between both sides of the

headset 5

Pair your headset with the

Bluetooth device 6

4 Use your headset 7

Connect the headset to a

Bluetooth device 7

Power on/o 7

Manage your calls and music 7

LED indicator status 8

How to wear 8

5 Technical data 9

6 Notice 10

Declaration of conformity 10

Disposal of your old product

and battery 10

Compliance with EMF 11

Trademarks 11

7 Frequently asked questions 12

2EN

1 Important

safety

instructions

Hearing Safety

Danger

•To avoid hearing damage, limit the time you

use headset at high volume and set the

volume to a safe level. The louder the volume,

the shorter the safe listening time is.

Be sure to observe the following

guidelines when using your headset.

• Listen at reasonable volumes for

reasonable periods of time.

• Be careful not to adjust the volume

continuously upwards as your

hearing adapts.

• Do not turn up the volume so high

that you can’t hear what’s around

you.

• You should use caution or

temporarily discontinue use in

potentially hazardous situations.

• Excessive sound pressure from

earphones and headset can cause

hearing loss.

• Using headset with both ears

covered while driving is not

recommended and may be illegal in

some areas while driving.

• For your safety, avoid distractions

from music or phone calls while in

trac or other potentially dangerous

environments.

General information

To avoid damage or malfunction:

Caution

•Do not expose headset to excessive heat.

•Do not drop your headset.

•Headset shall not be exposed to dripping or

splashing.

•Do not allow your headset to be submerged

in water.

•Do not use any cleaning agents containing

alcohol, ammonia, benzene, or abrasives.

•If cleaning is required use a soft cloth, if

necessary dampened with a minimum amount

of water or diluted mild soap, to clean the

product.

•The integrated battery shall not be exposed

to excessive heat such as sunshine, re or the

like.

•Danger of explosion if battery is incorrectly

replaced. Replace only with the same or

equivalent type.

About operating and storage

temperatures and humidity

• The storage temperature is between

-15°C to 55 °C. The operation

temperature is 45°C (max.) (up to

90% relative humidity).

• Battery life may be shorter in high or

low temperature conditions.

3EN

2 Your

Bluetooth

wireless

headset

Congratulations on your purchase, and

welcome to Philips! To fully benet

from the support that Philips oers,

com/welcome.

With this Philips wireless headset, you

can:

• enjoy convenient wireless

handsfree calls;

• enjoy and control wireless music;

• switch between calls and music.

What's in the box

Philips True Wireless headset BASS+

SHB4385

Replaceable rubber ear caps x 2 pairs

Charging case

USB charging cable (for charging only)

Quick start guide

Other devices

A mobile phone or device (e.g.

notebook, PDA, Bluetooth adapters,

MP3 players etc) which supports

Bluetooth and is compatible to the

headset (see ‘Technical data” on page

9).

4EN

Overview of your

Bluetooth wireless

headset

a Multi-function buttons

b LED indicator

c Micro USB charging slot

5EN

3 Get started

Charge the battery

Note

•Before you use your headset/charging case for

the rst time, charge the battery for 5 hours for

optimum battery capacity and lifetime.

•Use only the original USB charging cable to

avoid any damage.

•Finish your call before charging the headset,

as connecting the headset for charging will

power the headset o.

Charging case

Connect one end of the USB cable into

the charging case, and another end into

the power source.

» The charging case starts charging.

• When the charging case is charging,

a white LED light will be displayed.

• When the charging case is fully

charged, the white light goes o.

Headset

Place the headset on the charging case.

» The headset start charging.

• When the headset is charging, a

white LED light will be displayed.

• When the headset is fully charged,

the white light goes o.

Tip

•Normally, a full charge takes 2 hours (for the

headset or charging case).

Pair between both sides

of the headset

1 Make sure that the headset is fully

charged.

2 Press and hold the multi-function

buttons on both sides of the

headset for 2 seconds.

» The white LED lights on both

side of the headset ash 3 times.

» Both sides of the headset are

connected automatically.

» The headset is ready to pair with

the Bluetooth device.

6EN

Pair your headset with

the Bluetooth device

1 Turn on the Bluetooth function of

your mobile phone.

2 Pair the headset with the mobile

phone. For detailed information,

refer to the user manual of your

mobile phone.

Tip

•The headset stores the last 2 devices in the

memory. If you try to pair more than 2 devices,

the earliest paired device is replaced by the

new one.

The following example shows you how

to pair the headset with your mobile

phone.

1 Activate the Bluetooth feature

of your mobile phone, select

Philips SHB4385.

2 Enter the headset password "0000"

(4 zeros) if prompted. For those

mobile phones featuring Bluetooth

3.0 or higher, no need to enter a

password.

Philips SHB4385

SHB4405

7EN

4 Use your

headset

Connect the headset to a

Bluetooth device

1 Turn on your mobile

phone/Bluetooth device.

2 Press and hold the multi-function

buttons on both sides of the

headset for 2 seconds.

» The white LED lights on both

sides of the headset ash 3

times.

» Both sides of the headset are

connected automatically.

» The headset is reconnected

to the last connected mobile

phone/Bluetooth device

automatically. If the last one is

not available, the headset tries

to reconnect to the second last

connected device.

Tip

•If you turn on the mobile phone/Bluetooth

device or activate the Bluetooth feature after

turning on the headset, you have to reconnect

the headset and mobile phone/Bluetooth

device manually.

Note

•If the headset fails to connect to any

Bluetooth device within 5 minutes, it will

switch o automatically to save the battery life.

Power on/o

Task Multi-

function

button

Operation

Turn the

headset on.

Right and

left head-

set

Press and

hold for 2

seconds.

Turn the

headset o.

Right and

left head-

set

Press and

hold for 3

seconds.

» The

white

LED

ashes

for 3

times.

Manage your calls and

music

Music control

Task Multi-

function

button

Operation

Play or pause

music.

Right

headset

Press once.

Volume up Left

headset

Press twice.

Volume down Left

headset

Press once.

Skip forward. Right

headset

Press twice.

Skip

backward.

Right

headset

Press 3

times..

8EN

Call control

Task Multi-

function

button

Operation

Pick up/hang

up a call.

Right

headset

Press once.

» 1 beep.

Reject an

incoming call.

Right

headset

Press and

hold for 1

second.

» 1 beep.

Switch caller

during a call.

Right

headset

Press twice.

Voice control

Task Multi-

function

button

Operation

Siri/Google

Now.

Right

headset

Press twice

and hold for 1

second.

LED indicator status

Headset status Indicator

The headset is

connected to a

Bluetooth device,

while the headset

is in standby

mode or while

you are listening

to music.

The blue LED

ashes for every 5

seconds.

The headset is

ready for pairing.

The white LED

ashes 3 times.

The headset

is on but not

connected to a

Bluetooth device.

The blue LED

ashes for every 5

seconds.

If no connection

can be made, the

headset will turn

itself o within 5

minutes.

Low battery level

(headset).

You will hear

“battery low” on

the headset.

Low battery level

(charging case).

The red LED on

the charging case

ashes every 1

second.

Battery is

fully charged

(headset).

The white LED on

the headset is o.

Battery is fully

charged (charging

case).

The white LED on

the charging case

is o.

How to wear

1 2

Altri manuali per BASS+ SHB4385

Indice

Altri manuali Philips Cuffia

Philips

Philips SHB1300 Manuale utente

Philips

Philips SHM3400 Manuale utente

Philips

Philips SHM6103 Manuale utente

Philips

Philips SHQ3017 Manuale utente

Philips

Philips M2BT Manuale utente

Philips

Philips SHB6110/00 Manuale utente

Philips

Philips SHE2675BG Manuale utente

Philips

Philips SHB6101 Manuale utente

Philips

Philips SHB6111/10 Manuale utente

Philips

Philips SHM6100 Manuale utente

Philips

Philips SHM3400 Manuale utente

Philips

Philips SHB1300/61 Manuale utente

Philips

Philips SHB1300 Manuale utente

Philips

Philips SHI6601 Manuale utente

Philips

Philips SHM6110 Manuale utente

Philips

Philips SHB1400 Manuale utente

Philips

Philips OptiFit earloop SHB6110 Manuale utente

Philips

Philips SHM7500 - Headset - Binaural Manuale utente

Philips

Philips SHB7100 Manuale utente

Philips

Philips SHM6105 - Headset - Behind-the-neck Manuale utente

Philips

Philips SHB7102/05 Manuale utente

Philips

Philips SHB1400/00 Manuale utente

Philips

Philips BREEZE SWB9000/27 Manuale utente

Philips

Philips SHB7110/00 Manuale utente

Manuali Cuffia popolari di altre marche

Sena

Sena SMH10 Manuale utente

IASUS

IASUS Stealth IA-NT4-BASIC-BT Manuale utente

Sennheiser

Sennheiser EPOS ADAPT 230 Manuale utente

Doro

Doro Flexus HS2005 Manuale utente

GE 98971 Manuale utente

Hama

Hama 00184070 Manuale utente

Plantronics

Plantronics Blackwire 3200 Series Manuale utente

Blue Tiger

Blue Tiger Advantage PLUS Manuale utente

Jawbone

Jawbone Icon Manuale utente

Jabra

Jabra FR 20 Manuale utente

Roxcore

Roxcore Flow A+ Manuale utente

Turtle Beach

Turtle Beach XP 510 Manuale utente

Jabra

Jabra PRO 9460 Duo Manuale utente

HyperX

HyperX HyperX Cloud Flight Manuale utente

Bose

Bose MIE2 Mobile Manuale utente

Jabra

Jabra Steel Manuale utente

HyperX

HyperX cloud ii Manuale utente

Southwing

Southwing SA505 Manuale utente