Philips Water Solutions GoZero Manuale utente

GoZero

Soda Maker

Water Solutions

EN User manual

DE Gebrauchsanleitung

FR Manuel d’utilisation

Product image for reference only

1. Button

2. Decorative cover

3. Gas cylinder compartment

4. Bottom cap

5. Pedestal

6. Drip tray

7. Carbonating bottle

8. Upper cover

1. Touche

2. Capot décoratif

3. Compartiment du cylindre du gaz

4. Capuchon inférieur

5. Base

6. Bac de récupération

7. Cylindre de gaz

8. Capot supérieur

1. Knopf

2. Dekorative Abdeckung

3. Fach für Gaszylinder

4. Untere Abdeckung

5. Halterung

6. Tropfschale

7. Soda�asche

8. Obere Abdeckung

A2-1

A2-2

A3-1

A3-3A3-2 A3-4

H2O

TABLE OF CONTENTS

1. Einführung

2. Für Ihre Sicherheit

3. Allgemeine Beschreibung

4. Bevor der Spaß beginnt

5. Jetzt kann der Spaß losgehen

6. Reinigung

7. Gewährleistung & Service

1. Introduction

2. For your safety

3. General description

4. Before creating fun

5. Let the fun begin

6. Cleaning

7. Guarantee & service

1. Introduction

2. Consignes de sécurité

3. Description générale

4. Avant de créer du plaisir

5. Que la fête commence

6. Nettoyage

7. Garantie & service

1 Introduction

Congratulations on your purchase and welcome to Philips! To fully benefit from the support that we offer,

2 For your safety

Read this important information carefully before you use the appliance and save it for future reference.

General Warning

- DO NOT use carbonating bottles from other brands. This can damage the machine and lead to safety risk.

- DO NOT carbonate anything other than plain water. If the water contains sugar or other compounds the

valves could malfunction and it could be dangerous to use the product.

- DO NOT add fruit slices, ice and flavor in the carbonating bottle. Add flavor only AFTER carbonation.

- DO NOT carbonate into an empty carbonating bottle.

- DO NOT move the soda maker when it is carbonating.

- DO NOT carbonate for over 5 seconds.

- Always use your soda maker in an upright position.

- Always keep the soda maker away from any source of heat or direct sunlight. Use it in the room

temperature.

- Keep the soda maker away from children. It is not recommended to be used by children under 12 years

old without adult supervision.

Carbonating bottle

- Fill the bottle with clean and cold water only up to the fill line.

- DO NOT use other bottles not specifically designed for Philips soda maker. Your Philips soda maker is

designed to use only with the Philips carbonating bottle. The use of other bottles is not recommended.

Damages resulting from the use of a bottle other than a Philips carbonating bottle are not covered by

the warranty.

- Never put the bottle in the freezer.

- Always keep the bottle clean with the cap on to avoid bacteria and bad smell.

The following only applies to plastic carbonating bottle:

- Never wash the plastic bottle in dishwashers. DO NOT wash it in hot water exceeding 40°C.

- Philips bottels are clearly marked with an expiration date.Do not use the carbonating bottle after the expiry date.

- Never use a bottle that has been deformed, discolored or scratched. Before such use,check the expiration

date on the bottle,and check for damage and deformation. Replace expired, damaged or deformed

carbonating bottles with new ones.

The following only applies to full stainless-steel carbonating bottle:

- Never use a bottle that has been deformed, discolored or scratched. Before such use,check for damage

and deformation. Replace damaged or deformed carbonating bottles with new ones.

EN 1

EN 2

Carbon dioxide (CO2) cylinder

- Handle the cylinder properly to avoid serious personal injury.

- Carefully check the cylinder and cylinder valve for any damage before using the soda maker. If any

problems are found, do not use the cylinder and the soda maker and please contact the customer

service.

- Best before: see the date indicated on the cap or on the head sleeve, or at the bottom of the cylinder.

- Do not breathe the gas contained into the cylinder. It is forbidden to alter and/or modify the cylinder

and valve integrity.

- Remove the carbonating bottle if it is filled with water before installing the cylinder.

- It is forbidden to remove and/or handle the cylinder while the soda maker is working.

- Always keep the cylinder away from any sources of heat and direct sunlight, keep in a cool and

ventilated place. It is forbidden to expose the cylinder to temperatures higher than 50°C.

- A high concentration can cause asphyxiation (EIGA-As). It contains gas under pressure; it may explode

when heated (H280). Liquid contact may cause freezing burns.

- Do not put the cylinder into the freezer and/or into the fridge. If frozen do not use it and keep it away

from the body.

- Do not use the content for babies’ food preparation.

- Do not alter and/or modify the cylinder and the valve.

- Keep away from children.

- DO NOT attempt to puncture, throw or burn the cylinder.

- DO NOT transport the soda maker with the cylinder attached.

- The use duration of the cylinder depends on the use frequency.

3 General description

Product overview

Refer to

Machine rating of information:

Maximum Working Pressure: 116 psi/ 8 bar

Maximum Allowed Operating Temperature: 40°C / 104°F

4 Before creating fun

Installing the gas cylinder

1. Place the Philips soda maker in an upright position and on a flat surface. Remove the carbonating

bottle before installing or replacing the cylinder if it is filled with water. Remove the drip tray grid and

then carefully lay the soda maker down on the side.

EN 3

A3-1

A3-2

A3-3

A3-4

A2-1

2. Remove seal and cap from the CO2cylinder. Carefully insert the cylinder through the hole at the

bottom. Don’t drop the cylinder into the hole. When you feel that it reaches the bottom, begin

screwing the cylinder clockwise until it is fastened. Don’t screw too hard since this might break the

threads holding the gas cylinder in place.

3. When you need to replace the gas cylinder, lay the soda maker down on the side and unscrew it

counterclockwise and then carefully pull it out of the compartment.

5 Let the fun begin

1. Fill the carbonating bottle

Rinse the carbonating bottle with cold water before you use it for the first time. Fill the carbonating

bottle with cold, clean water up to the marked filling line.

2. Attach the carbonating bottle

Screw the carbonating bottle into the carbonating bottle socket. Screw counterclockwise if viewed from

above. Don’t screw extremely hard - just make sure the carbonating bottle sits properly.

3. Carbonate the water

Press the button downwards firmly until you hear a sound from the valve. The carbonation time is

2-3 seconds for each time.

NOTE:

· NEVER continuously carbonate for over 5 seconds each time. It can lead to gas wastes or personal injury.

· You can add more carbonation to the water by repeating the carbonating process.

4. Ventilate the bottle

When hearing a buzzing sound after 3 seconds, you should release the button back to horizontal

position. Please allow the button release itself. The remaining pressure in the carbonating bottle

will be released with a puff sound. Then the sparkling water is ready. You can unscrew the carbonating

bottle and enjoy it now.

6 Cleaning

Rinse the carbonating bottle

- Rinse the carbonating bottle before the first use.

- Use clean cold water, fiber brush with a mild detergent.

- Do not use solvent, strong detergent cleaner or abrasive cleaners to clean.

NOTE:

· Never wash the plastic carbonating bottles in a dishwasher.

· The full stainless-steel carbonating bottle is dishwasher safe.

A2-2

Clean the soda maker

· DO NOT use abrasive cleaners or solvent cleansers to clean.

· Wipe the drip tray to keep it dry.

7 Guarantee & service

If you need information or if you have any problems, please visit the Philips website at www.philips.com or

contact the Philips Customer Care Center in your country.

If there is no Customer Care Center in your country, go to local Philips dealer.

Please keep this user manual for future reference.

EN 4

1 Einführung

Herzlichen Glückwunsch zu Ihrem Kauf und herzlich willkommen bei Philips! Registrieren Sie Ihr Produkt

unter www.philips.com/water, um vollumfänglich vom Support, den wir anbieten, profitieren zu können.

2 Für Ihre Sicherheit

Lesen Sie diese wichtigen Informationen sorgfältig durch, bevor Sie das Gerät benutzen und heben Sie

diese für spätere Fragen auf.

Allgemeine Warnung

- VERWENDEN SIE KEINE Sodaflaschen anderer Hersteller. Das kann zu einer Beschädigung des Geräts und

Sicherheitsrisiken führen.

- VERSETZEN SIE ausschließlich reines Wasser mit Kohlensäure. Wenn das Wasser Zucker oder andere

Stoffe enthält, kann es zu einer Fehlfunktion des Ventils kommen und es kann gefährlich werden, das

Produkt zu benutzen.

- GEBEN SIE KEINE Fruchtstücke, Eis bzw. Aromen in die Sodaflasche. Fügen Sie Aromen hinzu erst

NACHDEM Sie das Wasser mit Kohlensäure versetzt haben.

- BEFÜLEN SIE KEINE leeren Sodaflaschen mit Kohlensäure.

- BEWEGEN SIE NICHT den Soda Maker, während Wasser mit Kohlensäure versetzt wird.

- FÜGEN SIE NICHT LÄNGER als 5 Sekunden lang Kohlensäure dem Wasser hinzu.

- Der Soda Maker muss stets aufrecht stehend verwendet werden.

- Schützen Sie den Soda Maker stets vor allen Hitzequellen bzw. direkter Sonneneinstrahlung. Verwenden

Sie ihn bei Zimmertemperatur.

- Halten Sie den Soda Maker von Kindern fern. Der Soda Maker sollte von Kindern unter 12 Jahren nicht

ohne die Aufsicht einer erwachsenen Person verwendet werden.



- Befüllen Sie die Flasche nur mit frischem und kühlem Wasser; beachten Sie dabei die Fülllinie.

- VERWENDEN SIE KEINE anderen Flaschen, die nicht speziell für den Philips Soda Maker vorgesehen

sind. Ihr Philips Soda Maker eignet sich ausschließlich für die Verwendung mit der Philips Sodaflasche.

Von der Verwendung anderer Flasche wird abgeraten. Schäden, die aus der Benutzung einer anderen

als der Philips Sodaflasche resultieren, fallen nicht unter die Gewährleistung.

- Stellen Sie die Flasche niemals in den Gefrierschrank.

- Halten Sie die Flasche stets sauber, indem Sie den Deckel zuschrauben, um eine Verunreinigung durch

Bakterien bzw. Geruchsentwicklung zu vermeiden.

Nachfolgendes gilt nur für die Sprudlerflasche aus Kunststoff:

- Spülen Sie die Kunststoﬀ�asche niemals in der Spülmaschine. Spülen Sie sie NICHT mit heißem Wasser über 40 °C.

- Die Flaschen von Philips sind eindeutig mit einem Ablaufdatum gekennzeichnet. Verwenden Sie die

Sprudlerflasche NICHT nach dem Abflaufdatum.

DE 5

Indice

Lingue:

Altri manuali Philips Produttore di soda

Philips

Philips GoZero ADD4902 Manuale utente

Manuali Produttore di soda popolari di altre marche

Soda Trend

Soda Trend P00268 Manuale utente

LIFEPLUS

LIFEPLUS ST02-P0-B0 Manuale utente

Happy Frizz

Happy Frizz MIO BLANC Manuale utente

Sudaba

Sudaba Mini Soda Maker Manuale utente

LINDR

LINDR SODA EXCLUSIVE GREEN LINE Manuale utente

Arzum

Arzum BUBBLE TOUCH Manuale utente

Haws

Haws 30-SSM202185 Manuale utente

eta

eta 0638 Manuale utente

Summary

Summary AS200200000232 Manuale utente

Stadler Form

Stadler Form HUGO Manuale utente

OBH Nordica

OBH Nordica SodaMaster Gazelle 6511 Manuale utente

sodaboss

sodaboss 9401FE Manuale utente

Soda Trend

Soda Trend STG-200 Manuale utente

SodaStream

SodaStream Art Manuale utente

Hamilton Beach

Hamilton Beach Fizzini Manuale utente

Hans Grohe

Hans Grohe Aqittura M91 SodaBase Manuale utente

DrinkMate

DrinkMate DM-SPR-420 Manuale utente

Livoo

Livoo DOM464 Manuale utente