Philips FC9256 Manuale utente

ServiceManual

Philips Consumer Lifestyle

Published by Philips Consumer Lifestyle Printed in the Netherlands © Copyright reserved Subject to modification

Vacuum cleaner

FC9256

08/11

PRODUCT INFORMATION

- This product meets the requirements regarding

interference suppression on radio and TV

- After the product has been repaired, it should function

properly and has to meet the safety requirements as

officially laid down at this moment

TECHNICAL INFORMATION

- Colour : Icy white

- Power consumption : 2000 W (IEC) 230 V

- Maximum Air displacement : 37 l/s

- Vacuum : 27.5 kPa

- Duststorage capacity : 1.5 L

- Cord length : 9 m

- Motor : Infrared remote controlled

- Fiter system : HEPA cyclone-filtration

auto-clean system

: Permanent motor

protection filter

: Ultra Clean Air HEPA13

washable exhaust filter

- Dimensions of cleaner : 485 x 285 x 335 mm

- Net weight : 9.6 kg

ACCESSORIES

- Nozzle : Tri-Active all purpose nozzle

- Tubes : Metal lacquered telescopic tube with

second handgrip

- Hose : Extra large hose

- Handgrip : Ergonomic handgrip with remote

control and LCD

- Accessories : Brush, crevice nozzle and small nozzle

- Accessory storage : Active accessory storage bridge in

handgrip

- Coupling : Button coupling

OPTIONAL (accessories)

- FC 8031 : Super Clean Air HEPA filter

- FC 8038 : Super Clean Air HEPA washable filter

FC9256

DISASSEMBLY- AND RE-ASSEMBLY ADVISE

- To open the appliance, first remove the filter cover

(item 37).

- Remove the can with the filters.

- Then remove the hingecover (2 screws A)

- When the hinge cover is removed, the dustcover can be

removed.

- To remove the housing (6 screws F), for some screws you

will require a screwdriver with 14.5 cm long shrank.

Screwdriver 4322 009 08490 for T15 can be used.

- When the repair is finished, check whether all functions of

the appliance work properly.

- To disassemble the cord winder, use TORX screwdriver no.

T10, which is one of a set consisting of T20; T15; T10; T9;

T8; T7 and T6 (code number 4822 395 50145)

ELECTRICAL DIAGRAM

REPAIR INSTRUCTION

- If the reel half spring unit is replaced, shaft (M) must be

lubricated with silicone grease. Do not apply any silicone

grease to or spill any grease on terminals (item 53) or

conductors (item 54).

- The cord winder spring must be tensioned to the maximum

level and the be rewound approx 1.5 turn.

- Item 13, air valve, opens to cool the motor if the air

displacement is too low or if the airflow is blocked.

Black

BlackBlack

Blue

Brown

IR PCB

Switch

CORD

WINDER

TRANSMITTER

2-8

FC9256

- Appliances from before WK845 have a potential problem

in the cord winder system; the lever of spindle (Pos. 24) can

move out of position.

Symptom:

Cord will not rewind pressing the cord winder button.

Solution:

Remove the Cord winder button as shown in below picture:

Remove the cord winder button by simultaneously operating

the button and putting a screwdriver between the openings

that occur.

Then lift the button by levering the screwdriver.

This has to be done at 2 (two) positions as indicated in the

picture.

Insert a screwdriver (size 1) in the position as shown in below

picture and move it backwards until a “Click” is heard, the

lever of spindle is now back in position. This can be tested by

pressing lever A, the cord should rewind now.

“Click”

REPAIR INSTRUCTION

To prevent lever shifting out of position to re-occur,

CW support (Pos. 68) must be added as shown in below

pictures:

Rotate the part 90 degrees CCW, once it is inside the housing

half way.

90°

CCW

90°

CCW

Then drop the part till it is completely inside the appliance

and push down with a screwdriver untill “Click”.

“Click”

Finally re-assemble the button.

Press it ﬁrmly, until the “Click”.

3-8

FC9256

PARTS LIST

4-8

Pos Service code Description

4322 005 25400

4322 003 34210

4322 003 34200

4322 003 34180

4322 003 33820

4322 003 33810

4322 000 68230

4322 003 33880

4322 001 73910

4322 003 33870

4322 003 35160

4322 003 33890

4322 005 26540

4322 009 09840

4322 003 32920

4322 005 25230

4322 004 20130

4322 005 25130

4322 003 33790

4322 005 27170

4322 005 27470

4322 006 23510

4322 001 74100

4322 003 31310

4322 003 33640

4322 003 33630

4322 005 25120

4322 000 39120

4322 003 32890

4322 003 32900

4322 003 33800

4322 005 27180

4322 003 33720

4322 006 07750

4322 003 33710

Handle assy

Handle side rear

Handle side front

Handle support

Dustcover toppanel Frozen blue

Dustcover Ice White

Spring

Dustcover lock button Ice White

Dustcover sealing

Dustc. inside incl. seal. Ice White

Choke valve cover Ice White

Hinge cover Ice White

Choke valve assy

Man. rattle ﬁlt. cyl. assy Ice White

Tower assy

Bucket assy Transp. frozen blue

Filter Brush

Upperh. sidec. assy Transp. fr. blue

Bumper right Ice White

Cordwinder button Ice White

RMC window assy

PCB assy incl. IR

Cooling tube

Lever of spindle

Front handle Ice White

Lower housing Ice White

Caster wheel assy Ice White

Motor inlet ﬁlter

Inlet sealing 2

Switch lever

Bumper left Ice White

On/Off button Ice White

Backpanel Ice White

Switch

Cord outlet Ice White

Pos Service code Description

4322 005 25110

4322 005 25150

4322 004 93350

4322 000 38960

4322 000 39020

4322 003 31220

4322 000 39000

4322 000 39010

4322 003 25390

4322 003 31240

4322 001 73440

4322 009 09430

4322 000 39110

4322 003 26030

4322 001 73520

4322 003 31250

4322 005 18670

4322 005 17430

4322 005 17910

4322 006 07410

4322 006 07390

4322 006 07400

4322 005 25770

4322 009 09910

4322 005 25270

4322 009 09920

4322 005 25790

4322 003 34660

4322 005 25800

4322 004 20580

4322 005 27320

4341 004 20840

4322 003 35650

Skate wheel assy Frozen blue

Exhaust grille assy Frozen blue

HEPA13 ﬁlter washable

Exhaust sealing

Silencer 4

S-class H sealing

Silencer 1 wall

Silencer 2 bottom

Inlet sealing 1

Motorhousing top

Motorbuffer front

Motor 1761 220 - 240 V

Silencer 3 VCM

Motor bracket

Bufferback green

Motorhousing bottom

Reelhalf spring unit

Reelhalf cordside assy

Contactplate assy

Cordset UK/HK 9.3 m

Cordset Euro 4.8 mm 9.3 m

Cordset Swiss 9.3 m

Battery lid assy

Bend type 2 assy

Hose XL/conn. assy Ice White

Hose XL/connection/bend

type 2 assy Ice White

Accessoiry holder

Crevice nozzle

Small nozzle

Brush tool

2pc Telesc. tube sec. handle assy

Tri-active nozzle

CW Support

FC9256

EXPLODED VIEW

5-8

FC9256

EXPLODED VIEW

Black Black

Brown

Black

Blue

Black

6-8

FC9256

EXPLODED VIEW

Blue

Brown

55 57

Black

7-8

FC9256

EXPLODED VIEW

Europe Ø 4.8mm 56

Swiss

55U.K. / H.K. 57

59 60

8-8

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Philips Aspirapolvere

Philips

Philips City Line FC8439 Manuale utente

Philips

Philips XW7110 Manuale utente

Philips

Philips FC9920/09 Manuale operativo

Philips

Philips SmallStar FC8286/01 Manuale utente

Philips

Philips 2000 series Manuale utente

Philips

Philips StudioPower FC9080 SERIES Manuale

Philips

Philips FC8269 - FC8250 Manuale utente

Philips

Philips FC8148 Manuale utente

Philips

Philips MiniVac FC6048/01 Manuale utente

Philips

Philips Impact HR8352/01 Manuale utente

Philips

Philips FC8774 Manuale utente

Philips

Philips HR8571/18 Manuale utente

Philips

Philips FC8957 Manuale utente

Philips

Philips FC6144 Manuale utente

Philips

Philips FC9910/01 Manuale utente

Philips

Philips FC8972 Manuale utente

Philips

Philips FC6132/02 Manuale utente

Philips

Philips FC6148 Manuale utente

Philips

Philips Impact Vacuum Cleaner Manuale utente

Philips

Philips FC9070/01 Manuale utente

Philips

Philips MiniVac FC6149/02 Manuale utente

Philips

Philips FC9934 Manuale utente

Philips

Philips FC9353 Manuale utente

Philips

Philips FC9120 Manuale utente

Manuali Aspirapolvere popolari di altre marche

Bissell

Bissell LittleGreen Proheat 1425 Series Manuale utente

Panasonic

Panasonic MC-YL637S147-AE Manuale utente

NEFF

NEFF N17XH10 0 Series Manuale utente

LG A9 Series Manuale utente

Oreck

Oreck Cordless Captura BK51700 Series Manuale utente

Kogan

Kogan KAVACROBVWA Manuale utente

Kränzle

Kränzle VENTOS 50 ID Guida utente

EVVO

EVVO Ai35 Manuale utente

DeWalt

DeWalt DWH200D Manuale utente

Pontec

Pontec Pondomatic Vacuum Cleaner Manuale utente

Cleanmaxx

Cleanmaxx PC-P007E Manuale utente

Exido

Exido 240-114 Manuale utente

RIDGID

RIDGID WD1685AU0 Manuale utente

Ezviz

Ezviz RE4P Manuale utente

STG global

STG global TANVAC HDV3000 Manuale utente

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Manuale utente

Factory

Factory M3340 Manuale utente

Shop-Vac

Shop-Vac VN92 SERIES Manuale utente