Philips 4-HEAD HI-FI VCR VR620CAT Manuale utente

VR620CAT

Video Cassette Recorder

Hookup Pages

75Ω

ANT /

CABLE

ANT /

CABLE

6 Hookups Without a Cable Box/Direct Broadcast System

The basic VCR/TV connection – antenna/cable to VCR to TV – is shown below. If you have a

Cable Box or a Direct Broadcast System, please see pages eight-nine. If you have a Stereo

TV, please see page 10. After you hook up the VCR, go to page 11 to turn on the VCR.

ANTENNA IN

Jack

(on back of TV)

Cable

(75 ohm)

Back of VCR

Antenna

Indoor/Outdoor

(300 ohm)

Disconnect the antenna or cable from your TV.

Connect the antenna or cable to the ANT(enna) IN Jack of your VCR.

Cable

(75 ohm)

Antenna

Indoor/Outdoor

(300 ohm)

CH 4

CH 3

CH3 / CH4

Switch

CH3 CH4

ANT /

CABLE

75Ω

ANT/

CABLE

RF coaxial cable

Connect the supplied black RF coaxial cable to the OUT Jack on the back of

the VCR and to the ANTENNA IN Jack on the TV. (You may use either a snap-on

type (supplied) or screw-on type of coaxial cable, whichever you prefer.)

Set the CH3/CH4 switch on the back of the VCR to CH3 or CH4, whichever

channel is not used or least used in your area. Set the TV to the same channel. For

example, when playing a tape, if the CH3/CH4 switch is set to CH3, the TV should be on

channel 03.

Hookups Without a Cable Box/Direct Broadcast System (cont’d) 7

ANTENNA IN Jack

(on back of TV)

example only

Plug in the power cords of the TV and the VCR.

You are ready to turn on the VCR. Please go to page 11 before turning on the

VCR.

8 Hookups With a Cable Box/Direct Broadcast System

There are two ways to connect your Cable Box/DBS to the VCR. With this connection:

●You may view any channel.

●You must select channels at the Cable Box/DBS. Channels cannot be changed at the VCR.

●You may not view a channel other than the one you are recording.

●You may not program channels at the VCR.

●You can only program a timer recording for one channel at a time. Set the TV and the VCR to the Cable

Box/DBS output channel (channel 03 or 04); set the CH3/CH4 switch on the back of the VCR to the same

channel. Set your Cable Box/DBS to the channel you want to record. When you enter the channel you want

to record in a timer recording, select channel 03 or 04 (the Cable Box/DBS output channel). (This is step 5

on page 31.) Leave the Cable Box/DBS on for a timer recording.

ANT /

CABLE

TV’s

ANTENNA IN

Jack

Cable Box/DBS VCR

Recording/Viewing Any Channel

Connections

With the VCR on and in VCR position (the VCR light will appear on the display

panel), use the CH(annel) o/pbuttons to set the VCR to the Cable

Box/DBS output channel (channel 03 or 04). Set the CH3/CH4 switch

on the back of the VCR to the same channel.

Set the TV to the same channel to which you set the VCR.

Select the channel you want to view/record at the Cable Box/DBS.

Connect a Cable signal to the IN Jack on the Cable Box/DBS.

Use the supplied black RF coaxial cable to connect the OUT Jack on the Cable

Box/DBS to the ANT(enna) IN Jack on the VCR.

Use a second RF coaxial cable (not supplied) to connect the OUT Jack on the

VCR to the TV’s ANTENNA IN Jack.

Cable

Signal RF coaxial

cable

RF coaxial

cable

Hookups With a Cable Box/Direct Broadcast System (cont’d) 9

ANT /

CABLE

With this connection:

●You may watch one channel while recording another.

●You may not record scrambled channels.

Recording One Channel/Watching Another

Put the Cable Box/DBS on the same channel as the

VCR’s CH3/CH4 switch. Set the TV to the Cable

Box/DBS output channel (03 or 04).

Then, with the VCR in VCR position (the VCR light will appear

on the display panel), use the CH(annel) o/pbuttons to

select the channel you want to record at the VCR. Start

the recording.

Press the VCR/TV button once to put the VCR in TV

position. (The VCR light will disappear.)

Select the channel you want to watch at the Cable

Box/DBS.

TV’s ANTENNA

IN Jack

Cable Box/DBS

VCR

• When you play a tape, make sure

the Cable Box/DBS is set to the

same channel as the CH3/CH4

switch on the VCR. Set the TV to

the Cable Box/DBS output channel

(03 or 04).

Helpful Hint

Connect a Cable signal to the VCR’s ANT(enna) IN Jack.

Use the supplied black RF coaxial cable to connect the OUT Jack

on the VCR to the IN Jack on the Cable Box/DBS.

Use a second RF coaxial cable (not supplied) to connect the OUT

Jack on the Cable Box/DBS to the ANTENNA IN Jack on the TV.

Connections

Cable

Signal

RF coaxial cable

10 Hookups with a Stereo TV

●Audio and Video cables are not supplied.

Connect the antenna or cable to the ANT(enna) IN Jack on the back of the VCR.

Connect a video cable to the yellow VIDEO OUT Jack on the back of the VCR. Then, connect

the other end of the video cable to the VIDEO IN Jack on your TV.

Connect a stereo audio cable to the red and white AUDIO OUT Jacks on the back of the

VCR, matching cable colors to the jack colors. Then, connect the other end of the audio cable

to the AUDIO IN Jacks on your TV, again matching cable colors to the jack colors.

If your TV’s AUDIO IN jacks are not color coded, connect the red (right) AUDIO OUT jack of the VCR

to the right channel AUDIO IN jack on the TV. Connect the white (left) AUDIO OUT jack of the VCR to

the left channel AUDIO IN jack on the TV.

Turn on your TV, making sure it is in Line Input mode. This might be referred to as the TV’s

Audio/Video In channel or the Auxiliary In channel. Please refer to your TV owner’s manual for details.

antenna or cable to

ANT(enna) IN Jack

Video Cable

Stereo Audio Cable

VIDEO (yellow) and

AUDIO (red and white)

OUT Jacks

Audio and Video

IN Jacks on TV

24 Front Panel

PAUSE Button

While recording, press to pause the recording. Press again to

resume recording. Details are on page 27. You can not pause a

One-Touch Recording. During tape playback, press to freeze the

picture. Press again to resume playback. Details are on page 38.

POWER Button

Press to turn the

VCR power on and off.

VCR/TV Button

Press to select VCR or TV position.

●VCR Position

Use to watch a tape, to watch a program

while recording it, or to watch a TV pro-

gram (changing channels at the VCR). When

the VCR light appears on the display panel,

the VCR is in VCR position.

●TV Position

Use to watch TV (changing channels at the

TV) or to watch one program while record-

ing another. When the VCR light does not

appear on the display panel, the VCR is in

TV position.

RECORD Button

Press once to start a recording. Press

repeatedly to start a One-Touch

Recording. Details are on page 29.

CHANNEL (p/o) Buttons

Press to change channels at the VCR. Or, press

to adjust the tracking of a tape during normal

playback or slow motion playback. Also, press

to remove vertical jitter in a Still picture.

PLAY Button

Press to play a tape. Press to release Slow, Search,

or Still mode and return to playback. Details are on

page 38. Press to select an item in the menu.

REW(ind) Button

When playback is stopped, press to rewind the tape

at high speed. During playback, press to rewind the

tape while the picture stays on the screen. Details

are on page 38. Press to return to a previous menu.

STOP/EJECT Button

Press once to stop the tape. When playback is stopped, press

to eject the tape. Press to select an item in the menu.

F.FWD (Fast Forward) Button

When playback is stopped, press to fast forward the tape at

high speed. During tape playback, press to fast forward the

tape while the picture stays on the screen. Details are on

page 38. Press to advance to the next menu or to change

the setting of an item in the menu.

STOP/EJECT

RECORD

MENU STATUS/EXIT

F.FWD

PAUSE

REW

CHANNEL

PLAY

POWER

VCR/TV

VIDEO L AUDIO R

Remote Sensor

Receives a signal from your

remote control so you can oper-

ate your VCR from a distance.

AUDIO In Jacks

Connect the audio cables

coming from the audio out

jacks of a camcorder,

another VCR, or an audio

source here. Details are on

page 34.

VIDEO In Jack

Connect a video cable

coming from the

video out jack of a

camcorder, another

VCR, or an audio-

visual source (laser

disc player, digital

video disc player, etc.)

here. Details are on

page 34.

MENU Button

Press to access the VCR menu.

STATUS/EXIT Button

Press to access or remove the on-screen status display.

Details are on page 22. Press to exit on-screen menus.

AUDIO IN Jacks

Connect the audio cables coming from

the AUDIO OUT Jacks of a camcorder,

another VCR, or an audio source here.

Details are on page 34.

VIDEO IN Jack

Connect a video cable coming

from the VIDEO OUT Jack of a

camcorder, another VCR, or an

audio-visual source (laser disc

player, digital video disc player,

etc.) here. Details are on page 34.

ANT(enna) IN Jack

Connect your antenna or cable

here. Details are on pages six-10.

CH3/CH4 Switch

Set to channel 3 or 4

to use your TV with

your VCR. Details are

on pages six-nine.

OUT Jack

Use the supplied RF coaxi-

al cable to connect this

jack to the ANTENNA IN

Jack on your TV, Cable

Box, or Direct Broadcast

System. Details are on

pages six-nine.

VIDEO OUT Jack

Connect a video cable going to the VIDEO

IN Jack of a camcorder, another VCR, or an

audio-visual system (monitor, laser disc

player, digital video disc player, etc.) here.

Details are on pages 34 and 40.

AC Power Cord

Connect to a stan-

dard AC outlet to

supply power to the

VCR.

AUDIO OUT Jacks

Connect the audio cables going to the AUDIO IN

Jacks of a camcorder, another VCR, or an audio

system here. Details are on pages 34 and 40.

ANT

AUDIO

VIDEO

OUT

OUT INCH3 CH4

OUT

Rear Panel 25

Make the connections shown above.

34 Rerecording (Tape Duplication)

VCR 2 will record your tape. Insert a blank tape in VCR 2. The

VCR must be in VCR position. (The VCR light will appear on the display

panel. If it does not, press the VCR/TV button once.)

Turn on the TV and set it to channel 03 or 04, whichever

channel the CH3/CH4 switch on VCR 2 is set to.

Point the remote control at VCR 2. Press the VCR but-

ton, then press the Number buttons 0, 0, 1 or 0, 0, 2. (See

Helpful Hints at right.)

Press the SPEED button to select SP or SLP at VCR 2.

Press the PLAY button on VCR 1 and the RECORD but-

ton on VCR 2 at the same time.

To stop recording, press the STOP/EJECT button on VCR 1, then

press the STOP/EJECT button on VCR 2.

VCR 1

Playing VCR VCR 2 - Recording VCR

VCR 1 will play your tape. Put a prerecorded tape in VCR 1.

1. Audio cables from AUDIO OUT Jacks

of VCR 1 to AUDIO IN Jacks of VCR 2

2. Video cable from VIDEO OUT Jack

of VCR 1 to VIDEO IN Jack of VCR 2

3. RF coaxial cable

from the OUT jack of

VCR 2 to the TV’s

ANTENNA IN Jack

• If you use the AUDIO and VIDEO

IN Jacks on the back of VCR 2,

press Number buttons 0, 0, 1 at

step 5. AV REAR will appear on the

TV screen.

• If you use the AUDIO and VIDEO

In Jacks on the front of VCR 2,

press Number buttons 0, 0, 2 at

step 5. AV FRONT will appear on

the TV screen.

• Unauthorized recording of copy-

righted television programs, video

tapes, or other materials may

infringe on the rights of copyright

owners and violate copyright laws.

• If a program has copyright protec-

tion, it may not record clearly.

• These instructions show you how to

copy tapes using two VCRs like

yours. Different VCRs may operate

differently.

Helpful Hints

●Audio and Video cables are not supplied.

Altri manuali per 4-HEAD HI-FI VCR VR620CAT

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Philips Sistema VCR

Philips

Philips VR388/55 Manuale utente

Philips

Philips turbo drive VR550 Manuale utente

Philips

Philips VR200/58 Manuale utente

Philips

Philips VR778/05 Manuale utente

Philips

Philips 2SB32 Manuale del sistema

Philips

Philips VR255/50 Manuale utente

Philips

Philips VR 447 Manuale utente

Philips

Philips VR6485 Guida rapida

Philips

Philips VR788/50 Manuale utente

Philips

Philips VR161/05 Manuale utente

Philips

Philips VR620/58 Manuale utente

Philips

Philips VR870CC Manuale utente

Philips

Philips VR215/02 Manuale utente

Philips

Philips VR323 Manuale utente

Philips

Philips VR 737/13 Manuale utente

Philips

Philips VRB411AT Manuale utente

Philips

Philips VRZ344AT Manuale utente

Philips

Philips VR6293 Manuale utente

Philips

Philips VR501/00P Manuale utente

Philips

Philips VRZ362AT Manuale utente

Philips

Philips Matchline VRQ45/58 Manuale utente

Philips

Philips VRA411AT Manuale utente

Philips

Philips VR488/50 Manuale utente

Philips

Philips VR400 Manuale utente

Manuali Sistema VCR popolari di altre marche

Toshiba

Toshiba M-662 Manuale utente

Sony

Sony GV-500 Primary Manuale utente

JVC

JVC HR-J282EU Manuale utente

Sony

Sony HDCAM-SR SRW5800 Manuale utente

Magnavox

Magnavox VRU242AT Manuale utente

Sony

Sony HVR-M10C Manuale utente

RCA

RCA VR634HF - Hi-Fi VCR Manuale utente

JVC

JVC HR-5910U Manuale utente

Panasonic

Panasonic ProLine AG-1320 Manuale utente

JVC

JVC HR-S8600EU Manuale utente

JVC

JVC HR-FS1U Manuale utente

Sharp

Sharp VC-H9888U Manuale utente

FUNAI

FUNAI LC-950 Manuale utente

Sharp

Sharp VC-S2000GM Manuale utente

Sony

Sony Video8 EV-A60 Manuale utente

Panasonic

Panasonic Omnivision PV-V4523S Manuale utente

Aiwa

Aiwa HV-E212 Manuale utente

JVC

JVC HR-J3006UM Manuale utente