Phoenix Model Classic Manuale utente
Instruction Manual
All wood construction.
95% almost ready to fly.
All accessories are included.
Most parts are cut by laser machine.
Easy to assemble and easy to prepair.
Pre-covered and decorated
with real iron - on film.
144.5 cm
(56.9 in)
2250 gr
(4.95 lbs)
114.5 cm
(45.1 in)
40 - 46
two stroke
4 channels
4 servos
1
KIT CONTENTS
AIR FRAME ASSEMBLIES
(2) Wing
(1) Fuselage
(1) Horizontal
(1) Vertical
(1) Instruction manual
main gear assembly
(2) Main gear
(2) 60mm wheel
(4) Collar
(4) 3mm x 4mm screw
(2) Nylon clasp
(4) 3mm x 12mm screw
nose gear assembly
(1) Nose gear
(1) 60mm wheel
(2) Collar
(2) 3mm x 4mm screw
(1) Steering arm
elevator control system
(1) Clevis
(1) Silicon tube
(1) Nylon clasp
(1) Nylon control horn
(2) 2mm x 16mm screw
(1) 1,7mm x 900mm metal rod
rudder control system
(1) Clevis
(1) Silicon tube
(1) Nylon clasp
(1) Nylon control horn
(2) 2mm x 16mm screw
(1) 1,7mm x 900mm metal rod
aileron control horn
(2) Clevis
(2) Silicon tube
(2) Nylon control horn
(2) Nylon snap keeper
(2) 1,7mm x 300mm metal rod
engine mount
(4) 3mm x 20mm screw
(4) Lock washer
FUel TANK
(1) Fuel tank
(1) Clunk
(1) 110mm silicone tube
(1) Stopper
(1) 80mm x 120mm foam
miscellaneous items
(1) Dihedral
(1) Spinner
(1) Trim tape 25mm x 600mm
(12) Rubber band
(2) 12mm dowel
(1) Wooden servo box
(1) Piece of wood
(1) Metal connector
(1) Servo box
Instruction Manual Classic
KIT CONTENTS: We have organized the parts as they come out of the box for better
identification during assembly. We recommend that you regroup the parts in the same
manner. This will ensure you have all of parts required before you begin assembly.
2
1 2
3 4
5 6
7 8
Draw a center line. Remove the covering.
Glue the wing joiner to the wing. Apply the epoxy into the wing section.
Glue the wing by epoxy. Apply the trim tape to the center section of the wing where
they join.
Remove the covering. Glue the two hard wood by C.A glue.
Instruction Manual Classic
J
o
i
n
i
ng the w
i
ng halves.
Joining the wing halves.
1
Installing the aileron servo and linkage.
2
Center line
3
910
11 12
13 14
15 16
Mark the shape of the servo box to the wing. Remove the covering.
Glue the servo box by C.A glue. Install and secure the aileron servo.
Install the two nylon control horn. Attach the clevis to the control horn.
Cut away the aileron pushrod. Bend "L" the aileron pushrod.
Instruction Manual Classic
Nylon control horn
Silicon tube
Silicon tube
4
17 18
19 20
21
22 23
Attach the nylon clasp to the aileron servo arm. Make the same way to install the second aileron pushrod.
Draw a center line. Remove the covering from the fuselage.
Attach the horizontal to the fuselage and check it. Check the horizontal and the wing.
Mark the shape of the fuselage onto the top and bottom of
the horizontal.
Remove the covering from the top and bottom of the
horizontal.
Instruction Manual Classic
I
nstall
i
ng the hor
i
zontal and vert
i
cal
.
Installing the horizontal and vertical.
3
A1 A2
A1 = A2
A1 A2
BB1
AA-1
Center line
5
24 25
26 27
28
a1 a2
a1 = a2
29 30
Glue the horizontal and fuselage by epoxy and check it. Cut away the covering from the fuselage.
Mark the shape of the fuselage onto the both side of
the vertical.
Remove the covering from the vertical.
Glue the vertical into the fuselage by epoxy and check it. Check the fin before it dry and remove the wing out of the
fuselage.
The landing gear and nose gear. Install the collar.
Instruction Manual Classic
J
o
i
n
i
ng the land
i
ng gear and nose gear.
Joining the landing gear and nose gear.
4
Collar
Gear
6
31 32
33 34
35 36
37
Install the wheel. Cut away the covering on the fuselage.
Install the landing gear. Secure the landing gear.
Install the wheel. Attach the wire pushrod to the steering arm.
Install the nose gear and secure it.
Instruction Manual Classic
7
38 39
40 41
42 43
44 45
The control horn and pushrod. Insert the silicon tube to the clevis of the rudder pushrod.
Remove the covering. Insert the ruder pushrod into the fuselage.
Install the nylon control horn. Attach the clevis to the control horn.
Install the rudder servo. Install the metal connector to the servo arm.
Instruction Manual Classic
I
nstall
i
ng the rudder and elevator pushrod
.
Installing the rudder and elevator pushrod.
5
Silicon tube
Control horn
Clevis
Control horn
8
46 47
48 49
50 51
52 53
Connect the rudder pushrod and the nose gear pushrod to
the rudder servo.
Secure the nose gear pushrod.
Cut away the rudder pushrod. Bend "L" the rudder pushrod.
Attach the nylon clasp to the servo arm. Remove the covering from the slot.
Insert the elevator pushrod into the fuselage. Install the control horn.
Instruction Manual Classic
9
54 55
56 57
58
59 60
Attach the clevis to the control horn. Install the elevator servo.
Cut away the elevator pushrod. Bend "L" the elevator pushrod.
Attach the nylon clasp to the servo arm.
Cut away the fuel tube. Install the stopper to the tank.
Instruction Manual Classic
Install
i
ng the
f
uel tank.
Installing the fuel tank.
6
5mm
Altri manuali per Classic
2
Indice
Altri manuali Phoenix Model Giocattolo
Phoenix Model
Phoenix Model Mustang P51 Manuale utente
Phoenix Model
Phoenix Model Extra 300 S Manuale utente
Phoenix Model
Phoenix Model Ryan STA Manuale utente
Phoenix Model
Phoenix Model Classic Manuale utente
Phoenix Model
Phoenix Model Cap 232 Manuale utente
Phoenix Model
Phoenix Model Extra 300S Manuale utente
Phoenix Model
Phoenix Model Spitfire Manuale utente
Phoenix Model
Phoenix Model CLASSIC-EP Manuale utente
Phoenix Model
Phoenix Model westland lysander Manuale utente
Phoenix Model
Phoenix Model SONIC Manuale utente
Phoenix Model
Phoenix Model Tiger Shark F20 Manuale utente
Phoenix Model
Phoenix Model Boomerang 60 Manuale utente
Phoenix Model
Phoenix Model Tucano Electric Manuale utente
Phoenix Model
Phoenix Model Cariba Mk2 Manuale utente
Phoenix Model
Phoenix Model YAK54 YAKOVLEV Manuale utente
Phoenix Model
Phoenix Model SBACH 46-55 Manuale utente
Phoenix Model
Phoenix Model F4U Corsair Manuale utente
Phoenix Model
Phoenix Model Diamond Manuale utente
Phoenix Model
Phoenix Model PC21 PILATUS Manuale utente
Phoenix Model
Phoenix Model BULLDOG Manuale utente
