Phoenix NEXT PLUS LS7010 Manuale utente
NEXT PLUS
LS7010
Operating
Instructions
2
Contents Page
1 Batteries 3
2 Open with Code 4
3 Set User Code 4
4 Register Fingerprints 5
5 Open with Fingerprint 5
6 Delete Fingerprints 6
7 Locking 6
8 Multi mode 7
9 Dual mode (Fingerprint + Code) 8
10 Dual mode (Code + Code) 9
11 Code and Sound Hide 10
Contents
FOR SAFETY
Prior to using the safe, please read the instructions carefully.
Cautions when placing the safe.
• The safe is heavy and should be handled very carefully.
• Never move the safe with the door open.
• Place the safe on at oor.
Cautions when using the safe.
• Be careful not to slam the door closed.
• Be careful not to trap hands or ngers when closing door.
• As the safe is heavy and operated with a smart digital lock, it is not recommend
that children operate the safe.
• Be careful not to forget the user code, and keep the instruction outside of the
safe.
3
Components
Prior to using safe
1) Hold the digital lock and turn it anti-clockwise to open.
2) Load 4pcs of AA Alkaline batteries.
(LED ickers, Bi Bi Bi sound, Melody rings 1 second)
The batteries must be replaced if
1 ) When touching the pad, LobAtt appears on the display.
2) The battery icon alights on the pad.
* Battery life span : 1 year (Average openings 3 times a day)
* Even when the batteries are completely exhausted, the
registered codes and ngerprints are not erased.
Instructions Drawer Shelf Shelf Clips
(4pcs)
1.5V Alkaline
AA Batteries
(4pcs)
Memory Button
Digital Lock
Door Panel
1. Batteries
4
2. Open with Code
NOTE: If a wrong code is entered, bi-ric will sound and ErrOr will show on the display.
Paralysis: If a wrong code is entered 5 times, the lock will be paralyzed for 5 minutes.
1) No response from the touch pad.
2) Remaining paralysis time will be shown on the display as min-sec
e.g. 4 minutes and 29 seconds will display as “4_29”.
3) After 5 minutes, the paralysis will end.
Scramble Numbers: The code can be disguised by inserting random numbers either before,
after or both before and after the user code. E.g. user code of 1234, xxx1234#, 1234xxx# or
xxx1234xxx#. Total of 32 numbers can be accepted.
3. Set User Code
NOTE: 1) Prior to closing the door, please check the new code has been registered correctly
by following 2. Open with Code.
2) It is not recommended to use codes such as a telephone number, birthday or
consecutive numbers for security reasons.
1 ) Touch
(Bi sound, Pad lights up)
2 ) Enter
(Bi sound)
(Factory Code 1 2 3 4)
3 ) Touch
(Melody, on display)
4 ) Turn handle clockwise
and open the door
1 ) Press Button on the back of the door.
(Bi sound)
2 ) Enter
(4 ~16 digits)
3 ) Touch
(Melody, good on display)
It is advisable to set a new code with the door open and test the new code before closing the door.
User Code
User Code
Pad
Touch Pad #
#
OPEnd
Open the Door
New CodeM #
New CodeM #
5
4. Register Fingerprints
NOTE: 1) Prior to closing the door, please conrm with 5. Open with Fingerprint if the
nger-print has been registered correctly.
2) Worn-out/impaired ngerprints may not be accepted, as they are dicult to read.
* 32 ngerprints can be entered.
5. Open with Fingerprint
NOTE: If an unregistered ngerprint is entered, bi-bi-bi will sound and ErrOr will show on the
display.
Paralysis: If unregistered ngerprints are entered 5 times, the lock will be paralyzed for 5 minutes.
1) No response from the touch pad.
2) Remaining paralysis time will be shown on the display as min-sec
e.g. 4 minutes and 29 seconds, 4_29.
3) After 5 minutes, the paralysis will end.
1 ) Press Button on the back of the door.
(Bi sound)
2 ) Enter
(Bi sound)
3 ) Touch
(Bi sound)
4 ) Enter
(Bi sound)
Keep the door open.
5 ) Touch
(Blue light ickers)
6 ) Place a on to the
sensor.
(Melody rings, 1st , 2nd , good on display)
Place the user’s nger
on the sensor while the
blue lamp is ickering.
1 ) Touch
(Bi sound, Blue light ickers)
2 ) Put on sensor
(Melody, on display)
3 ) Turn handle clockwise
and open the door
User Code#
M 3
#3M User Code
Fingerprint 3 times
#
Fingerprint 3 times
Fingerprint
Touch Pad Open the Door
Pad Fingerprint
OPEnd
#
6
6. Delete Fingerprints
All the registered ngerprints are erased simultaneously.
7. Locking
Close the door, and turn handle anti-clockwise.
1 ) Press Button on
the back of the door.
(Bi sound)
2 ) Touch
(Bi sound)
3 ) Enter 4 ) Touch
(Melody, on display)
Keep the door open.
M #3#
M#
3
#
Close the Door
CLEAr
7
8. Multi user mode
Two users can independently open the safe with their own user code.
* Multi user mode and dual mode can not be used simultaneously.
NOTE: 1) 2nd user code must be different from 1st code.
2) Prior to closing the door, conrm the 2nd code has been registered correctly by
following 9. Multi mode > Open.
3) 2nd code can be changed in the same way as 9. Multi mode > Set.
4) For setting or changing the 1st code, please follow the instructions in 3. Set User
Code.
NOTE: When unsetting multi user mode the 2nd code is removed automatically. The 1st code will
be retained.
SET
1 ) Press Button on
the back of the door.
(Bi sound)
2 ) Enter
(Bi sound)
3 ) Touch
(Bi sound)
4 ) Enter
(4 ~16 digits)
5 ) Touch
(Melody, good on display)
UNSET
1 ) Press Button on the back of the door.
(Bi sound)
2 ) Touch
(Bi sound)
3 ) Enter
(Bi sound)
4 ) Touch
(Melody, on display)
OPEN
1 ) Touch
(Bi sound, Pad lights up)
2 ) Enter 1st Code or 2nd Code
(Bi sound)
3 ) Touch
(Bi sound)
4 ) Turn handle clockwise and
open the door
2nd Code
#
M 2 #
2nd Code#M 2 #
#M 2#
#M 2#
CLEAr
#
Pad
Touch Pad Open the Door1st Code or 2nd Code
#
8
9. Dual mode (Fingerprint + Code)
Code and ngerprint should be entered consecutively to open the safe.
* Dual mode and multi mode can not be used simultaneously.
NOTE: 1) Prior to closing the door, conrm the ngerprint has been registered correctly as
shown in 10. Dual mode (Fingerprint+Code) > Open.
2) Finger-print can be changed in the same way as 10. Dual mode (Fingerprint+Code)
> Set.
3) For setting or changing user code, please follow the instructions in 3. Set User Code.
NOTE: When unsetting dual mode, the registered ngerprint is removed automatically. The user
code will be retained.
SET
UNSET
OPEN
1 ) Press Button on
the back of the door.
(Bi sound)
2 ) Enter
(Bi sound)
3 ) Touch
(Bi sound)
4 ) If there is no registered ngerprint
put Fingerprint on sensor
(Melody, good on display)
1 ) Press Button on
the back of the door.
(Bi sound)
2 ) Touch
(Bi sound)
3 ) Enter
(Bi sound)
4 ) Touch
(Melody, CLEAr on display)
1 ) Touch
(Bi sound, Pad lights up)
2 ) Put
on sensor (Melody)
3 ) Enter 4 ) Touch
(Melody, on
display)
5 ) Turn handle clockwise and
open the door
Fingerprint
M 5 #
M 5 #
M 5# #
M 5# #
User CodePad
#
OPEnd
Open the Door
User CodePad
Fingerprint #
Fingerprint
9
10. Dual mode (Code + Code)
Two different codes should be entered consecutively to open the safe.
* Dual mode and multi mode can not be used simultaneously.
NOTE: 1) 2nd code must be different from 1st code.
2) Prior to closing the door, conrm the 2nd code has been registered correctly as
shown in 11. Dual mode (Code+Code) > Open.
3) 2nd code can be changed in the same way as 11. Dual mode (Code+Code) > Set.
4) For setting or changing 1st code, please follow the instructions in 3. Set User Code.
NOTE: When unsetting dual mode, the 2nd code is removed automatically. The 1st code will be
retained.
SET
UNSET
OPEN
1 ) Press Button on
the back of the door.
(Bi sound)
2 ) Enter
(Bi sound)
3 ) Touch
(Bi sound)
4 ) Enter 2nd Code
(4 ~16 digits)
5) Touch
(Melody, good on display)
1 ) Press Button on the
back of the door. (Bi sound)
2 ) Touch
(Bi sound)
3 ) Enter
(Bi sound)
4 ) Touch
(Melody, CLEAr on display)
1 ) Touch
(Bi sound, Pad lights up)
2 ) Enter 1st
Code
4 ) Enter 2nd
Code
6 ) Turn handle clockwise and
open the door
3 ) Touch 5 ) Touch
2nd Code#M 9 #
##
M9
#M 9 #
##M 9
Pad 1st Code # 2nd Code # Open the Door
Pad # #
10
11. Code and Sound Hide
SET
UNSET
1 ) Press Button on the back of the door.
(Bi sound)
2 ) Enter
(Bi sound)
3 ) Touch
(Melody, Hide on display)
1 ) Press Button on the back of the door.
(Bi sound)
2 ) Touch
(Bi sound)
3 ) Enter 4 ) Touch
(Melody, CLEAr on display)
M 7
#7
#
M
M 7# #
#7 #
M
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Phoenix Sicuro
Phoenix
Phoenix DS2500E Manuale utente
Phoenix
Phoenix CITADEL SS1190 Scheda informativa del prodotto
Phoenix
Phoenix Fire Fox SS1621E Manuale utente
Phoenix
Phoenix PALLADIUM LS8000 Series Manuale utente
Phoenix
Phoenix SS0720E Series Manuale utente
Phoenix
Phoenix Dream Series Manuale utente
Phoenix
Phoenix PS600 Manuale utente
Phoenix
Phoenix FS1270E Series Manuale utente
Phoenix
Phoenix SS0990K Scheda informativa del prodotto
Phoenix
Phoenix SS0100E Scheda informativa del prodotto
Phoenix
Phoenix DIAMOND DEPOSIT HS1090 Scheda informativa del prodotto
Phoenix
Phoenix FS1610K Scheda informativa del prodotto
Phoenix
Phoenix FIRECHIEF FS1650 Scheda informativa del prodotto
Phoenix
Phoenix KS0002C Manuale utente
Phoenix
Phoenix FS2230K Series Manuale utente
Phoenix
Phoenix SS0800E Series Manuale utente
Phoenix
Phoenix COSMOS HS9070 Scheda informativa del prodotto
Phoenix
Phoenix GS8010K Scheda informativa del prodotto
Phoenix
Phoenix SS1190K Manuale di installazione e d'uso
Phoenix
Phoenix SS0800K Scheda informativa del prodotto
