Phoenix PALLADIUM LS8000 Series Manuale utente

PLD7000

9000BL

INSTRUCTION

LS8000 SERIES

Data media such as CDs or Diskettes are to be stored in data safes.

High value items such as cash or jewelries must be stored in certified

security safes.

Followings are the safety instructions & rules. Prior to using the safe,

please read the instructions carefully.

Cautions when placing the safe.

To avoid dampness, place the safe on a well ventilated and flat floor.

The safe is so heavy that it is to be handled very carefully.

Never move the safe in door open.

Be cautious not to be bumped against corners of safe.

Cautions when using the safe.

Be careful not to close the door roughly.

As a safe is heavy and operated with a smart digital lock, we

recommend children not to touch it.

The articles must be apart from door inside panel.

Overload articles may cause some troubles when closing and opening.

Be careful not to forget the user code, and keep the instruction

outside of the safe.

Be careful not to hurt hands or fingers when closing door.

Heavy articles are recommended to be laid on the bottom.

This fire safe is for storing paper documents, not for data media.

In case of high dampness inside the safe, the articles may go moldy

so that the desiccant must be replaced periodically.

FOR SAFETY

Components

Instruction

1.5V Alkaline

AA Batteries

8pcs

PLD7000BL : 2pcs / 8pcs

PLD9000BL : 3pcs / 12pcs

9V Battery

for Alarm

(Optional)

Shelf Shelf Clips

Alarm

(Optional)

Nomenclature

Overview

Push right side of door frame

to expose battery case.

InteriorFront

Touch Panel

Door back

Battery Case

Touch Pad

FND

Battery

AS Alert

When AS Icon appears,

please contact to AS Center.

Finger-print

sensor

Battery Case

Memory

Button

Optional

Alarm

LED Light

Push

2) Pull out Battery Case

forward.

1 ) Push the front of

the battery case.

Prior to using safe,

1) Push the front of the battery case to expose battery case.

2) Load batteries.

3) Replace eight batteries

at same time.

Batteries

When Battery Change Icon or Battery Change Message LobAtt appears, the locking system

* NOTE : If a wrong code entered, “bi-ric” sound and ErrOr on FND.

* Paralysis : If wrong codes entered 5 times, the lock gets paralyzed 5 minutes.

1) No response against pad touch.

Paralysis Rest Time is indicated on FND as Min-Sec.

In case of paralysis rest time 4 minutes and 29 seconds, 4_29 indicated on FND.

3) After 5 minutes, paralysis gets released.

* Scramble Numbers :

When opening a safe, scramble numbers can be put

before and/or after the real code to avoid peeps. User code should be

touched consecutively.

32 numbers are acceptable including the real code.

(Ex) In case of user code ‘ 1 2 3 4 ’, touch ‘ xxx1234 ’, ‘ 1234xxx ’ or ‘ xxx1234xxx ’.

1) Touch Pad 2) Touch User Code 3) Touch

4) Open the door

(Factory Code 1 2 3 4)(OPEnd on FND)

2. Open with Code

may not work normally. A set of 8 alkaline batteries should be replaced together with the new one.

Even though batteries completely exhausted, the registered codes are not erased.

Touch Pad

PUSH PULL Replace Batteries

User Code Open the Door

* 32 finger-prints are acceptable.

* NOTE : 1) Prior to closing the door, please confirm with 5. Open with Finger-print if the finger-print

correctly registered.

2) Worn-out finger-print can’t be entered.

* NOTE : 1) Prior to closing the door, please confirm with 2. Open with Code

if the New Code registered correctly.

2) It is not recommended to enter the specific user code such as telephone number,

birthday, consecutive number, and etc. for security reasons.

2) Enter New Code

(4 ~16 digits)

3. Set User Code

Keep door open.

Press

Button on door back.

4. Register Finger-prints

Please put user’s finger

on sensor while

blue lamp flickering,

3) Touch

5) Touch

4) Touch User Code

6) Put Finger-print three times on sensor.

(Blue light flickers)(1st , 2nd , good on FND)

3) Touch

( good on FND)

2) Touch 3

Press

Button on

door back.

User Code

Finger

print 3 times

M 3

New Code

Close the door. Door locks automatically.

If door is unlocked when closed the door, Error sign on FND

and sounding “Bi Bi Bi Bi”.

1) Touch Pad 2) Put Finger-print on

sensor

Open the door

(OPEnd on FND)

* Paralysis : If unregistered finger-prints entered 5 times, the lock gets paralyzed 5 minutes.

1) No response against pad touch.

Paralysis Rest Time is indicated on FND as Min-Sec.

In case of paralysis rest time 4 minutes and 29 seconds, 4_29 indicated on FND.

3) After 5 minutes, paralysis gets released.

* NOTE : If a unregistered finger-print entered, “bi-bi-bi” sound and ErrOr on FND.

(

CLOSEd on FND)

If one finger-print is removed, all the registered finger-prints are erased simultaneously.

Press

Button on door back.

4) Touch

3) Touch

(CLEAr on FND)

2) Touch

5. Open with Finger-print

Locking

* If door opening state keeps over 90 seconds, the alarm sounds.

6. Delete Finger-prints

Keep door open.

Finger

print Finger

printTouch Pad

##M 3

Close the Door

ㆍTwo users can independently open safe with each other’s own user code.

* Multi mode and dual mode can not be used simultaneously.

1) Touch Pad 2) Touch 1st Code

or 2nd Code

3) Touch

4) Open the door

(OPEnd on FND)

* NOTE : If multi mode unsets, 2nd code is removed automatically. 1st code cannot be removed.

* NOTE : 1) 2nd user code must be different from 1st code.

Prior to closing door, confirm as shown in 8. Multi mode

▶

Open if 2nd Code registered correctly.

3) 2nd code can be changed in the same way as 8. Multi mode

▶

Set .

4) For setting or changing 1st code, please do as shown in 3. Set User Code .

(4 ~16 digits)

Press

Button on

door back.

5) Touch

2) Touch

3) Touch

4) Enter

2nd Code

(good on FND)

Press

Button on

door back.

4) Touch

3) Touch

2) Touch

(CLEAr on FND)

8. Multi mode

Set

Unset

Open

2nd Code

# #M 2

1st

Code

Touch Pad Open the Door

ㆍCode and finger-print should be entered in a row for opening.

* Dual mode and multi mode can not be used simultaneously.

* NOTE : 1)

Prior to closing door, confirm as shown in 9. Dual mode(Finger-print+Code)

▶

Open if Finger-print registered correctly.

Finger-print can be changed in the same way as 9. Dual mode(Finger-print+Code)

▶

Set .

For setting or changing user code, please do as shown in 3. Set User Code .

5) Open the door

1) Touch Pad 2)

Put Finger-print

on sensor

Touch

User Code

4) Touch

(OPEnd on FND)

Press

Button on

door back.

4) Touch

3) Touch

2) Touch

(CLEAr on FND)

Press

Button on

door back.

2) Touch

3) Touch

If there is no registered fingerprint

Put Finger-print three times on sensor.

(good on FND)

(dUAL on FND)

9. Dual mode (Finger-print + Code)

Set

Unset

Open

Finger

print 3 times

#M 5

# #M 5

Finger

print User Code

Touch Pad

Open the Door

* NOTE : If dual mode unsets, 2nd code is removed automatically. 1st code cannot be removed.

* NOTE : 1) 2nd code must be different from 1st code.

Prior to closing door, confirm as shown in 10. Dual mode(Code+Code)

▶

Open if 2nd Code registered correctly.

3) 2nd code can be changed in the same way as

10. Dual mode(Code+Code)

▶

Set .

4) For setting or changing 1st code, please do as shown in 3. Set User Code .

1) Touch Pad 2) Touch

1st Code

6) Open the door

4) Touch

2nd Code

5) Touch

3) Touch

(OPEnd on FND)

Press

Button on

door back.

4) Touch

3) Touch

2) Touch

(CLEAr on FND)

(4 ~16 digits)

Press

Button on

door back.

5) Touch

2) Touch

3) Touch

4) Enter

2nd Code

(good on FND)

(dUAL on FND)

10. Dual mode (Code + Code)

ㆍTwo different codes should be entered in a row for opening.

* Dual mode and multi mode can not be used simultaneously.

* While using Dual locking function (Code + Code), finger-print function doesn’t work.

Set

Unset

Open

2nd

Code

# #M 9

1st

Code

2nd

Code

Touch Pad Open

Alarm is automatically released when door is opened.

Optional Alarm

Curfew Mode

Press

BUTTON

(On / Off )

(LED turns on/off, 10 seconds required)

Battery life span : 1year (in alarm setting)

In following cases, 9V battery must be replaced.

- If alarm horns more than 30 minutes

- When LED light is not bright enough

Set/Unset

Installing

Place alarm loaded with 9V battery on doorback.

3) Touch

Press

Button

on door back.

2) Touch

(Alerton FND)

Press

Button

on door back.

4) Touch

3) Touch

(CLEAr on FND)

2) Touch

Button

Battery Housing Cover

LED Light

Push down to open.

ㆍOnce alarm system is affected by shock or tilt, it makes horn immediately.

ㆍWhen Alarm system is set on, some impacts to the safe may cause alarm horning.

ㆍMotion sensor may respond to all kinds of movements.

11. Alarm Setting

Set

Unset

#M 8

# #M 8

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Phoenix Sicuro

Phoenix

Phoenix DS2500K Scheda informativa del prodotto

Phoenix

Phoenix Dream Series Manuale utente

Phoenix

Phoenix SS1160F Scheda informativa del prodotto

Phoenix

Phoenix FS0352C Series Manuale utente

Phoenix

Phoenix SS0800E Series Manuale utente

Phoenix

Phoenix SS0100E Scheda informativa del prodotto

Phoenix

Phoenix VENUS HS0656 Scheda informativa del prodotto

Phoenix

Phoenix DS4620E Manuale utente

Phoenix

Phoenix SS1160 Scheda informativa del prodotto

Phoenix

Phoenix SS1190E Series Manuale utente

Phoenix

Phoenix COSMOS HS9070 Scheda informativa del prodotto

Phoenix

Phoenix SS0800E Scheda informativa del prodotto

Phoenix

Phoenix NESO SS0200F Series Manuale utente

Phoenix

Phoenix PLANET HS6070 Scheda informativa del prodotto

Phoenix

Phoenix FS0440F Scheda informativa del prodotto

Phoenix

Phoenix REDL2 Manuale utente

Phoenix

Phoenix FS1650E Scheda informativa del prodotto

Phoenix

Phoenix Mercury HS2050 Manuale

Phoenix

Phoenix SS0935E Series Manuale utente

Phoenix

Phoenix FIRE COMMANDER FS1910E Manuale utente

Phoenix

Phoenix SS0990K Scheda informativa del prodotto

Phoenix

Phoenix Fire Fox SS1621E Manuale utente

Phoenix

Phoenix SS0987E Series Manuale utente

Phoenix

Phoenix FS0352C Scheda informativa del prodotto

Manuali Sicuro popolari di altre marche

Squire

Squire Stronghold Keysafe Manuale utente

Vaultek

Vaultek 10 Series Scheda tecnica

Arregui

Arregui CLASS Manuale utente

Beaumont

Beaumont SMART KEYBOX Manuale utente

Honeywell

Honeywell 2077D - 1.21 Cubic Foot Anti-Theft Safe Manuale utente

Hornady

Hornady SnapSafe Trunk Safe II Manuale utente

SPORTS AFIELD

SPORTS AFIELD SA-HD5-BIO Manuale utente

Honeywell

Honeywell 5912 Manuale utente

Technomax

Technomax Trony Series Manuale

SPORTS AFIELD

SPORTS AFIELD INSTINCT BIOMETRIC Series Manuale utente

RICHTER CZECH

RICHTER CZECH LA Manuale operativo

Olymp

Olymp GOsafe 110 Manuale utente

Clarke

Clarke Strong-Arm CS1000K Manuale di istruzioni

Ankaro

Ankaro ANK EZ I Manuale utente

Intratone

Intratone KEY SAFE Guida

Costway

Costway HW50956 Manuale utente

Megasat

Megasat K Series Manuale utente

ECOSAFE

ECOSAFE 3030ARD Manuale utente