Pilz PSSu H IBSe Manuale utente
Operating Manual — No. 21721-EN-02
Decentralised system PSSuniversal I/O
Operating Manual PSSu H IBSe
Operating Manual PSSu H IBSe
PSSu H IBSe
This document is a translation of the original document.
All rights to this documentation are reserved by Pilz GmbH & Co. KG. Co ies may be made
for internal ur oses.
Suggestions and comments for im roving this documentation will be gratefully received.
Pilz®, PIT®, PMI®, PNOZ®, Primo®, PSEN®, PSS®, PVIS®, SafetyBUS ®, SafetyEYE®,
SafetyNET ®, the s irit of safety® are registered and rotected trademarks of
Pilz GmbH & Co. KG in some countries.
SD means Secure Digital.
Preface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Contents
Contents
Contents Page
Chapter 1 Introduction
1.1 Validity of documentation 1-1
1.1.1 Retaining the documentation 1-1
1.2 Overview of documentation 1-2
1.3 Definition of symbols 1-3
Chapter 2 Overview
2.1 Module features 2-1
2.2 Front view 2-2
Chapter 3 Safety
3.1 Intended use 3-1
3.2 Safety regulations 3-3
3.2.1 Use of qualified personnel 3-3
3.2.2 Warranty and liability 3-3
3.2.3 Disposal 3-3
Chapter 4 Function description
4.1 Module features 4-1
4.1.1 Integrated protection mechanisms 4-1
4.1.2 Supply voltage 4-1
4.2 INTERBUS 4-2
4.2.1 Connection to Interbus 4-2
4.2.2 Selector switch for setting the
transmission rate
4-2
4.2.3 Selector switch for setting the INTERBUS
parameters
4-3
4.3 USB port 4-4
Chapter 5 Installation
5.1 General installation guidelines 5-1
5.1.1 Dimensions 5-1
5.2 Installing the head module 5-2
Chapter 6 Interfaces
6.1 Interface assignment 6-1
6.1.1 Connection to INTERBUS 6-1
6.1.2 Connection via USB 6-2
Contents
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
2
Chapter 7 Operation
7.1 Messages 7-1
7.2 Display elements 7-2
7.2.1 Display elements for system diagnostics 7-2
7.2.2 Display elements for INTERBUS
diagnostics
7-3
7.3 Diagnostic bytes 7-5
7.3.1 Structure and contents of the status byte
(Byte 0)
7-5
7.3.2 Structure and contents of the slot byte
(Byte 1)
7-5
7.3.3 Structure and contents of the channel byte
(Byte 2)
7-5
7.3.4 Structure and contents of the module byte
(Byte 3)
7-6
Chapter 8 Technical details
8.1 Technical details 8-1
8.2 Order reference 8-3
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
1.1 Validity of documentation
1 Introduction
11000IntroductionIntroduction1-1.1Validity of documentation1100Validity of documentation1-][BA Einf Gültigkeit Kopfmodul ohne SB
This documentation is valid for the PSSu H IBSe module. It is valid until
new documentation is published.
Please also refer to the following documents:
PSSuniversal System Description
PSSuniversal Installation Manual
Einf Einleitung
This operating manual explains the function and operation, describes
the installation and provides guidelines on how to connect the product .
1.1.1 Retaining the documentation
Retaining the documentation1-Einf Aufbewahren
This documentation is intended for instruction and should be retained
for future reference.
1.2 Overview of documentation
1 Introduction
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
1-2
1.2Overview of documentation1200Overview of documentation1-][BA_Einführung Übersicht Kopfmodule
1 Introduction
The introduction is designed to familiarise you with the contents, struc-
ture and specific order of this manual.
2 Overview
This chapter provides information on the module's most important fea-
tures.
3 Safety
This chapter must be read as it contains important information on safety
and intended use.
4 Function Description
This chapter describes the module's individual components.
5 Installation
This chapter explains how to install the module.
6 Interfaces
This chapter describes the module's interfaces.
7 Operation
This chapter explains the display elements and advises on what to do if
a fault occurs.
8 Technical Details
This chapter contains the product's technical details and order refer-
ence.
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
1.3 Definition of symbols
1 Introduction
1.3Definition of symbols1300Definition of symbols1-Einfhrung Zeichen
Information that is particularly important is identified as follows:
DANGER!
This warning must be heeded! It warns of a hazardous situation
that poses an immediate threat of serious injury and death and
indicates preventive measures that can be taken.
WARNING!
This warning must be heeded! It warns of a hazardous situation
that could lead to serious injury and death and indicates preven-
tive measures that can be taken.
CAUTION!
This refers to a hazard that can lead to a less serious or minor
injury plus material damage, and also provides information on
preventive measures that can be taken.
NOTICE
This describes a situation in which the unit(s) could be damaged
and also provides information on preventive measures that can
be taken. It also highlights areas within the text that are of partic-
ular importance.
INFORMATION
This gives advice on applications and provides information on
special features.
1 Introduction
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
1-4
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
2.1 Module features
2 Overview
22000OverviewOverview2-2.1Module features2100Module features2-Geraetemerkmale_Zusatz BA Einleitung
The product has the following features:
][Merkmale_Schnittstelle ST-Bus INTERBUS-Interface for switching
– Standard inputs/outputs
USB port for connection to a PC for
– Commissioning
– Service
][Merkm ale_LED ST-Bus LEDs for:
– System status
–USBstatus
– Status of the INTERBUS interface
][Merkmale_E-Module ST-Bus Electronic modules that can be used for input/output:
– All standard modules
(PSSu E S...)
2.2 Front view
2 Overview
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
2-2
2.2Front view2200Front view2-BA_Frontansicht
Key:
1: Selector switch for setting the transmission rate and other Interbus
parameters
2: Interbus interface for remote bus OUT
3: Interbus interface for remote bus IN
4: LEDs for system diagnostics
5: Labelling strip with:
– Order number
– Serial number
– Hardware version number
– Firmware version number on delivery
6: Field for 2D code
7: Labelling strip with interface configuration of the USB port
8: LEDs for Interbus diagnostics
9: Description of head module
10: USB port (Mini-B)
PSSu H
IBSe
Usb Dev
USB
2
D -
3
D +
5
G N D
USB
312 048
0000000
HW 000
000
RC
RD
UL
BA
RE OTE OUTRE OTE IN
ON OFF
DIAG
500k 2
1
2
3
4
5
6
7
8
9
10
Indice
Altri manuali Pilz Controllori
Pilz
Pilz PNOZ mc5p Manuale utente
Pilz
Pilz PNOZ mm0.2p Manuale utente
Pilz
Pilz PNOZ mml1p Manuale utente
Pilz
Pilz PNOZ mmc4p Manuale utente
Pilz
Pilz PSS 3075-3 Series Manuale utente
Pilz
Pilz PMUT X1P Manuale utente
Pilz
Pilz PSEN ma1.4a-57 Manuale utente
Pilz
Pilz 20 748-03 Manuale utente
Pilz
Pilz PNOZmulti Classic PNOZ ms3p TTL Manuale utente
Pilz
Pilz PNOZ m EF 1MM Manuale utente
Pilz
Pilz PSEN sl-1.0p 4.2 Manuale utente
Pilz
Pilz PNOZ m B1 Manuale utente
Pilz
Pilz PSEN sl-0.5n 1.1 Manuale utente
Pilz
Pilz PSEN sl-1.0p 3.1 Manuale utente
Pilz
Pilz PMotion Manuale utente
Pilz
Pilz PNOZ m B0 Manuale utente
Pilz
Pilz PNOZ m EF SafetyNET Manuale utente
Pilz
Pilz PNOZ m C0 Manuale utente
Pilz
Pilz PNOZ mm0p Manuale utente
Pilz
Pilz PNOZ mmc7p CC Manuale utente
