PITTMAN 100-22L Manuale utente
Bike rack assembly
4.Ring spanners 16 and 17 mm
5.Nutrunner
6.Hammer drill for fastening to floor
1.Metal drill bit ø10 mm
2.Concrete drill bit ø8 mm
3.Socket wrenches 16 and 17 mm
Tools required
1
3
4
5
6
2
1:1 1:2
100-22L
6 - 1 6 - 2
Step1, Assemble lower rear beam
Parts
2x “171206” (side)
1x “171212” (lower rear horizontal beam)
4x Bolt M10 x 70 mm
4x M10 nut
1:1, Assemble the parts
1:2, Attach the nuts loosely by hand
AXELENT SAFE-X AB · BOX 1 · KÄVSJÖVÄGEN 17 · SE-335 04 HILLERSTORP, SWEDEN
2:1
4:1 4:2
5:1 5:2 5:3
3:1 3:2 3:3
2:2
Step4, Assemble the lower rails
Parts
Parts from step 3
2x “20011” (fixed rail)
8x Bolt M10 x 70 mm
8x M10 nut
4:1, Assemble the parts
4:2, Attach the nuts loosely by hand
Step5, Put the bike rack on its side and tighten all the nuts
Parts
Parts from step 4
5:1, Put the bike rack on its side
5:2, Tighten all the nuts
5:3, Set the bike rack upright again
6 - 3 6 - 4
2
Step3, Assemble upper beam
Parts
Parts from step 2
1x “20152”(upper horizontal beam)
4x Bolt M10 x 110 mm
4x M10 nut
3:1, Assemble the parts
3:2, Check that the upper beam is tilting “backwards” (2° )
3:3, Attach the nuts loosely by hand
Step2, Assemble lower front beam
Parts
Parts from step 1
1x “171211” (lower front horizontal beam)
4x Bolt M10 x 70 mm
4x M10 nut
2:1, Assemble the parts
2:2, Attach the nuts loosely by hand
AXELENT SAFE-X AB · BOX 1 · KÄVSJÖVÄGEN 17 · SE-335 04 HILLERSTORP, SWEDEN
7:1 7:2 7:3
Step6, Bolt the bike rack to the floor
Parts
Complete bike rack
at least 6x bolt, depending on the floor
material
Done!
6 - 5 6 - 6
Step7, Assemble the upper rails
Parts
Parts from step 5
2x “20005” (extendable rail)
6x Bolt M10 x 110 mm
6x M10 nut
7:1-7:2, Assemble the parts
7:3, Tighten the nuts
7:4, Tighten all the nuts
AXELENT SAFE-X AB · BOX 1 · KÄVSJÖVÄGEN 17 · SE-335 04 HILLERSTORP, SWEDEN
Altri manuali per 100-22L
1
Altri manuali PITTMAN Rack e supporto
