Pixio C2L Manuale utente

WARNING

· Image may different from the actual product.

· Make sure the package is perfect before sign it, if any defect please ask

carrier confirm it.

· Verify all the parts are included, not all the hardware included will be used.

· Install according to manual, or improper installation and assemble may cause

display to fall suddenly so producer will not response for any loss or injury.

· The product contains small items so keep away of children.

· Choose approximate place for mounting, and be aware of display size,extension

height adjustment,maxium weight capacity and pitch or roll requirement.

P 1/8 A-01

Multiple Flexiele Monitors Stand

C2L

Installation Instruction

step 1

Parts list:

Arm assemble 1 Pole assemble 3

P 2/8 A-01

C- (8.0mm*80mm)-1 pcs

A- (M4x12)-8 pcs B- (M4x16)-8 pcs

D- (Ø8.0*Ø5.5*5mm)-8 pcs E- (5.0mm*150mm)-1 pcs

Desk clamp 1X

Clamp-1

Install desk clamp and screw

tightly with 8mm allen key

(Figure1-1)

Figure1-1

Install grommet clamp and

screw tightly with 8mm allen

key (Figure1-3)

Clamp-2

Figure1-2

50.0

80.0

F- (2.0mm*50mm)-1 pcs G- (4.0mm*60mm)-1 pcs

step 2

P 3/8 A-01

Figure2-1

Screw the pole then connect

with the desk part

(Figure 2-1）

Install the desk part

(Figure 2-2）

Figure2-2

step 3

Take arm assemble（1）to attach the pole assemble（3），

then adjust the height properly,and tighten adjust lock

collar as Figure3-1

Lock Collar

Use 8mm(C) allen key to tighten the

screw of pole assemble to secure arm

assemble with pole assemble.

(Figure3-2）

Figure3-1

Figure3-2

2~4mm

step 5

Place the display face down on protective surface，

and choose proper screw.When turn the two screws

in the upper back face,make sure the distance is

2-4mm between the head of screw and display as

Figure 4-1.

Figure4-1 Figure4-2

Figure5-1

A/B

C/D

Choose C or D proper screw for

different display back face with

spacer.When turn the two screws

in the upper back face as

Figure4-2,make sure the distance

is 2-4mm between the head of

spacers and display as

Figure 5-1.

step 4

P 4/8 A-01

step 7

P 5/8 A-01

Tight or loose the screw by hand to align the

displays.Or you can pitch display to get the horizontal

level.(Figure7-1 and Figure 7-2).

Figure7-1

Figure7-2

Swivel adjustment Swivel adjustment

step 6

Attach the display with two screws in the

center mount bracket，then use Philips

screwdriver to tighten the two screws. Stop

suddenly when you encounter any resistance.

as Figure6-1

Figure6-1

Then take proper screws to tighten the

other two screws (Figure6-2)

Figure6-2

step 9

Move left

and right

Move left

and right

Figure9-1

P 6/8 A-01

Move the monitor and get zero distance

between monitors，then loose or tighten screw

by hand Figure 9-1.

Warning: When loose the

screws Only one loop,

not more than three.

step 8

12°

The product can tilt forward and backforward+12/-12

degree to get good view.And also can adjust horizontal

level.Use 4mm allen key(G) to tighten or loose the control

hex screw as Figure 8-1～8-4.

Figure8-1 Figure8-2

Figure8-4

Figure8-3

Swing

adjustment

Displays in both sides can come forward 0～18 degrees

to suit different view angle. Then use 4mm allen key(G)

to tighten or loose to get required angle as Figure11-1.

Figure11-1

step 11

P 7/8 A-01

Swing

adjustment

step 10

Figure10-1

Loose the screws by hand to

slide left and right.

Attach the cable to the arm and pole with plastic clip and insure

enough slack is left in the cables to allow for movement. Use the

cable clip to secure the cables to the pole and

get clean look as Figure 11-2

Figure11-2

P 8/8 A-01

step 11

Indice

Altri manuali Pixio Rack e supporto

Pixio

Pixio PS2S WHITE Manuale utente

Manuali Rack e supporto popolari di altre marche

Salamander

Salamander Acadia AC/W/L400/WH Manuale utente

Fohhn

Fohhn VAT-09 Guida utente

ricoo

ricoo FS0522 Manuale utente

AMSOIL

AMSOIL BMK-22 Guida rapida

Kargo Master

Kargo Master 48220 Manuale utente

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuale utente

ricoo

ricoo S1222 Manuale utente

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuale utente

VidaBox

VidaBox VB MNT FFS2 Manuale utente

Welch Allyn

Welch Allyn 48960 Manuale utente

Arkon

Arkon CM035-ST-2 Manuale utente

PROEL

PROEL PLWIN60C Manuale utente

Agilent Technologies

Agilent Technologies E2609B Manuale utente

Mustang

Mustang MV-ARM4 Manuale utente

Mounting Solutions

Mounting Solutions WRM-320 Manuale utente

Pyle

Pyle PMKSPAD1 Manuale utente

ShelterIt

ShelterIt 21208 Manuale utente

SPL

SPL RackPack?4 1040 Manuale utente