PiXORD P606 Manuale utente

P-606(W) Quick Guide

1. Hardware Connection

P-606(W) – Physical Overview

P-606(W) – Physical Connection

1. Prepare a PC with Ethernet link to the network

2. Connect LAN port (RJ45) of the camera to a network switch/hub

3. Connect power jack

4. Ensure the power adaptor specification matches the power system (110V or 220V) and

connect the adaptor to the outlet

5. Check LED status (Power/Network)

2. Software Installation

The following software is necessary for the proper display and use of the camera/video

server from the Web site. The software will be taken from the Software Package CD.

IP Installer

The IP Installer is used to locate and configure network cameras and video servers in the

LAN.

3. Network Configuration

Using IP Installer to Assign IP Address

1. Once IP Installer has been successfully installed on the PC, double click to run the

software.

2. Click the menu bar [Tool] > [Search Network Device] to search the device in the LAN.

3. Select device with the MAC Address corresponds to the camera that is to be configured.

4. Double click the item to open the Property Page or click the menu bar View > Property.

MAC Address

5. Modify the network settings of the camera.

6. After filling in the properties, click [Synchronize] button to complete the configuration

settings then click [OK] button to save in the PC.

Open the Web-based UI

1. To access the Web-based UI of the selected unit, run the View > Open Web on the menu

bar.

2. For first time user, there will be a prompt to install the ActiveX control. Confirm the

installation as it is required to view the video stream and some operations.

3. If the device has been configured correctly, the default Web browser will open to the

home page of the selected device.

* Username and password is required. (Default is admin / admin)

Verify and Complete the Installation from Your Browser

If not able to get the ActiveX download properly, user must temporarily lower your security

settings to perform a one-time-only installation of the ActiveX component onto your workstation,

as described below:

1. From the Tools menu, select [Internet Options] -> [Security] -> [Custom Level]

2. Set the security level to Low and click [OK].

3. Restore the security level after theActiveX installation.

Altri manuali per P606

1

Questo manuale è adatto per i seguenti modelli

1

Indice

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente