Planar LB1500R Manuale utente
LB1500R
LB1500RTC
LB1503R
Open-Frame Monitors
USER’S GUIDE
www.planar.com
European Union 2002/95/EC Directive on
the Restriction of Hazardous Substances (RoHS)
In February 2003, the European Union issued Directive 2002/95/EC on the Restriction of Hazardous
Substances, commonly known as RoHS, in certain electrical and electronic equipment. It restricts the use
of six hazardous substances, including lead (Pb).
The Directive states that all products placed on the European market after July 1, 2006 must be compliant
with its requirements.
Planar Systems Inc. is fully in support of and compliant with EU Directive 2002/95/EC on all its products,
except where exempted, such as medical. Should those exemptions be removed in the future, Planar will
comply with such Directives or amendments.
A Planar part number will be modified with an “LF” suffix designation to indicate RoHS compliance, as
shown on the part number label affixed to the display and on the box containing the display.
Important Recycle Instructions:
LCD Lamp(s) inside this product contain mercury. This product may contain other electronic waste
that can be hazardous if not disposed of properly. Recycle or dispose in accordance with local,
state, or federal Laws. For more information,
contact the Electronic Industries Alliance at WWW.EIAE.ORG. For lamp specific disposal information
check WWW.LAMPRECYCLE.ORG.
Revision Control
Date Description
May 2006 Document number 020-0463-00A
March 2007 Document number 020-0463-01A Inserted LB1500RTC information
Contents
Usage Notice
Precautions .......................................................................................................................................2
Introduction
About the Products...........................................................................................................................3
Package Overview............................................................................................................................5
Installation
Product Overview.............................................................................................................................6
Signal Input Layout..........................................................................................................................6
Start Your Installation ......................................................................................................................7
User Controls
Rear Panel Controls..........................................................................................................................8
How to Use the OSD Menus..........................................................................................................10
On-Screen Display Menus..............................................................................................................11
Appendices
Troubleshooting..............................................................................................................................13
Warning Signal...............................................................................................................................14
Product Dimensions .......................................................................................................................14
Compatibility Modes......................................................................................................................18
LB1500R / LB1500RTC / LB1503R User’s Guide (020-0463-01A) 2
Usage Notice
Warning- To prevent the risk of fire or shock hazards, do not expose
this product to rain or moisture.
Warning- Pease do not open or disassemble the product as this may
cause electric shock.
Precautions
Follow all warnings, precautions and maintenance as recommended in this user’s manual to
maximize the life of your unit.
Do:
Turn off the product before cleaning.
LCD front surface may be cleaned using a soft clean cloth moistened with mild window
glass commercial cleaners or 50/50 mixture of water and isopropyl alcohol.
Use only high quality safety approved AC/DC power adapter that comes with your
monitor.
Disconnect the power plug from the AC outlet if the product is not going to be used for
an extended period of time.
Don’t:
Do not touch the LCD Display screen surface with sharp or hard objects.
Do not use abrasive cleaners, waxes or solvents for cleaning.
Do not operate the product under the following conditions:
oExtremely hot, cold or humid environment.
oAreas susceptible to excessive dust and dirt.
oNear any appliance generating a strong magnetic field.
oIn direct sunlight.
LB1500R / LB1500RTC / LB1503R User’s Guide (020-0463-01A) 3
Introduction
About Planar’s LB1500R/LB1500RTC/LB1503R
The LB1500R/LB1500RTC/LB1503R is a 15” flat panel screen with an active matrix,
thin-film transistor (TFT) liquid crystal display (LCD).
Features include:
Direct analog signal input
Direct digital DVI signal input (LB1503R)
Direct composite video signal input (LB1503R)
Active matrix TFT LCD technology
1024x768 XGA resolution
15” viewable display area
31.5 ~ 60 kHz horizontal scan
56 ~ 75 Hz refresh rate
Auto -adjustment function
Multilingual OSD user controls
VESA DPMS power saving
75 mm VESA rear mount attachment
LB1500R / LB1500RTC / LB1503R User’s Guide (020-0463-01A) 4
Touch Screen for LB1500RTC
Capacitive for finger interface
Surface: Anti-glare treatment
Interface: USB
Durability: 225 million touches in a single location
Hardness: Cannot be scratched using any stylus with Mohr’s rating of less than 6.5
Transmissivity: up to 91.5% at 550 nm
Driver: Microsoft®Windows®2000/XP/CE/XP Embedded/Server™ 2003/Linux
LB1500R / LB1500RTC / LB1503R User’s Guide (020-0463-01A) 5
Package Overview
LB1500R/LB1500RTC
Monitor LB1503R Monitor Quick Start Guide
Power Adapter Power Cord VGA Signal Cable
DVI-D Cable
For LB1503R Video BNC Cable
For LB1503R USB Cable
For LB1503R
Touchscreen Driver
Installation CD-ROM
LB1500R / LB1500RTC / LB1503R User’s Guide (020-0463-01A) 6
12VDC
Power
In
p
u
t
DVI Input VGA
Input Audio
Input
Composite
Video
12VDC
Power Input VGA
Input Audio
Input
Installation
Product Overview
Front View Front View
LB1500R/LB1500RTC LB1503R
Signal Input Layout
Figure 1. LB1503R Connector Inputs
F
Figure 2. LB1500R/LB1500RTC Connector Inputs
LB1500R LB1500RTC
LB1500R / LB1500RTC / LB1503R User’s Guide (020-0463-01A) 7
Start Your Installation
Connecting the Display (Figure 3)
To setup this display, please refer to the following figure and procedures.
1. Be sure all equipment is turned off.
2. Connect the DC power cord to the power connector; plug one end of the AC
power cord into the power adapter, and the other end into an electrical outlet
(n).
3. Connect the VGA signal cable from display VGA input connector to the 15-pin
connector of your host computer and tighten the screws ().
4. For LB1503R connect the DVI signal cable from display DVI input connector
to DVI connector of your host computer and tighten the screws ()
5. For LB1503R connect the composite video cable from display video input to
video output source ().
6. For LB1500RTC do not connect the USB cable until touchscreen software
driver is installed! ()
7. Turn on your computer, display and or video source.
Figure 3. The LB1500R Connections Figure 3. The LB1500RTC Connections
Questo manuale è adatto per i seguenti modelli
2
Indice
Altri manuali Planar Monitor
Planar
Planar PS4652 Manuale utente
Planar
Planar PE1900 Manuale utente
Planar
Planar PL1920M Manuale utente
Planar
Planar PT1510MX Manuale utente
Planar
Planar PZN2710Q Manuale utente
Planar
Planar SD2421W Manuale utente
Planar
Planar PLL2710W Manuale utente
Planar
Planar LA1910R Manuale utente
Planar
Planar PJ19W Manuale utente
Planar
Planar PLL2210MW Manuale utente
Planar
Planar UltraRes UR8450-MX Manuale utente
Planar
Planar RS232 Manuale utente
Planar
Planar PS5500 Manuale utente
Planar
Planar CM17.4SXAD Manuale utente
Planar
Planar LC1502R SERIES Manuale utente
Planar
Planar PT170 Manuale utente
Planar
Planar PX171M Manuale utente
Planar
Planar PXL2240MW Manuale utente
Planar
Planar PE191M Manuale utente
Planar
Planar LA1910R Manuale utente
