Planet Networking & Communication WPG-130N Manuale utente

Note

– 1 – – 2 –

– 3 – – 4 –

1. Package Contents

2. Physical Installation

3. Hardware Installation

– 7 – – 8 –

– 5 – – 6 –

Front Panel Description

Rear Panel Description

WPG-130N Quick Guide CD-ROM

World-Wide Adapter Set VGA AdapterPower Adapter

30FPS

802.11n Pocket

Presentation Gateway

WPG-130N

FURTHER INFORMATION :

The above steps introduce simple installations and

configurations for WPG-130N. For further configurations

of the utility (WPG), Virtual Extended Screen, and Wi-Fi

AP-Client etc, please refer to the user’s manual in the CD.

If you have further questions, please contact the local

dealer or distributor where you purchased this product.

2011-E60050-000

Thank you for choosing PLANET WPG-130N. Before

installing the device, please verify the contents inside the

package box.

If there is any item missed or damaged, please

contact the seller immediately.

Step 1: Please turn on your projector first, and connect

the WPG-130N to the projector via VGA port.

Now you can power on WPG-130N.

Step 2: When the projector shows the default screen as

below, it indicates WPG-130N is ready now.

1) First, make sure Wi-Fi function of your smartphone or

PDA is enabled, and connect the Smartphone or PDA

with WPG-130N.

2) Open the browser of the smartphone or PDA, and it

would redirect to the WPG-130N web page (or you can

enter the default IP address 192.168.1.1 to access

it.). Download the MobiShow client software, and

execute the installation program.

3) Open “Programs” on your smartphone or PDA, and

select “MobiShow” icon to launch the client

software.

4) The SSID of available access points will be listed on

your smartphone or PDA. Select WPG-130N.

Power LED

(US/EU/UK)

Power Connector

(5V DC Input) Reset Button

VGA Connector

5) Input the login code displayed on the projector screen,

and the following main menu will be shown on your

phone.

6) Select which feature to use. To project the screen of

your phone, click on the “Screen” icon. To make a

presentation, select the “PtG” icon. To project the

photos from your phone, select the “Photo” icon.

Step 2: Open the web browser and it will redirect to

WPG-130N home page automatically, or you can

enter the default IP address 192.168.1.1 to

access it.

Step 3: Download the client utility (WPG) of Windows

7/Vista/XP and execute it. After installing the

program, you’ll see WPG shortcut on your PC

desktop.

Step 4: Launch WPG on the desktop, and then input the

projector screen.

Step 5: Click the button to start projection, or choose

one of the numbers 1~4 to project to the split

screen.

4. Software Installation – Windows

Step 1: Site survey the wireless signal of WPG-130N,

and connect your PC with it wirelessly.

Default IP Address: 192.168.1.1

Default SSID: WPG-130N

* The connection information can be found from the

projector screen.

Note

Please make sure the firewall in Windows will

allow the WPG software to pass through.

Power

Adapter

Power

Control panel for Screen Projection

Status Indicator

Addendum : Software Installation –

Windows Mobile 5/6

Note

– 1 – – 2 –

– 3 – – 4 –

1. Package Contents

2. Physical Installation

3. Hardware Installation

– 7 – – 8 –

– 5 – – 6 –

Front Panel Description

Rear Panel Description

WPG-130N Quick Guide CD-ROM

World-Wide Adapter Set VGA AdapterPower Adapter

30FPS

802.11n Pocket

Presentation Gateway

WPG-130N

FURTHER INFORMATION :

The above steps introduce simple installations and

configurations for WPG-130N. For further configurations

of the utility (WPG), Virtual Extended Screen, and Wi-Fi

AP-Client etc, please refer to the user’s manual in the CD.

If you have further questions, please contact the local

dealer or distributor where you purchased this product.

2011-E60050-000

Thank you for choosing PLANET WPG-130N. Before

installing the device, please verify the contents inside the

package box.

If there is any item missed or damaged, please

contact the seller immediately.

Step 1: Please turn on your projector first, and connect

the WPG-130N to the projector via VGA port.

Now you can power on WPG-130N.

Step 2: When the projector shows the default screen as

below, it indicates WPG-130N is ready now.

1) First, make sure Wi-Fi function of your smartphone or

PDA is enabled, and connect the Smartphone or PDA

with WPG-130N.

2) Open the browser of the smartphone or PDA, and it

would redirect to the WPG-130N web page (or you can

enter the default IP address 192.168.1.1 to access

it.). Download the MobiShow client software, and

execute the installation program.

3) Open “Programs” on your smartphone or PDA, and

select “MobiShow” icon to launch the client

software.

4) The SSID of available access points will be listed on

your smartphone or PDA. Select WPG-130N.

Power LED

(US/EU/UK)

Power Connector

(5V DC Input) Reset Button

VGA Connector

5) Input the login code displayed on the projector screen,

and the following main menu will be shown on your

phone.

6) Select which feature to use. To project the screen of

your phone, click on the “Screen” icon. To make a

presentation, select the “PtG” icon. To project the

photos from your phone, select the “Photo” icon.

Step 2: Open the web browser and it will redirect to

WPG-130N home page automatically, or you can

enter the default IP address 192.168.1.1 to

access it.

Step 3: Download the client utility (WPG) of Windows

7/Vista/XP and execute it. After installing the

program, you’ll see WPG shortcut on your PC

desktop.

Step 4: Launch WPG on the desktop, and then input the

projector screen.

Step 5: Click the button to start projection, or choose

one of the numbers 1~4 to project to the split

screen.

4. Software Installation – Windows

Step 1: Site survey the wireless signal of WPG-130N,

and connect your PC with it wirelessly.

Default IP Address: 192.168.1.1

Default SSID: WPG-130N

* The connection information can be found from the

projector screen.

Note

Please make sure the firewall in Windows will

allow the WPG software to pass through.

Power

Adapter

Power

Control panel for Screen Projection

Status Indicator

Addendum : Software Installation –

Windows Mobile 5/6

Altri manuali Planet Networking & Communication Portale