Planet POE-151 Manuale utente
1-1
English
1. Overview
Thank you for purchasing PLANET IEEE 802.3at / af Power over
Ethernet Injectors. These PoE injectors will work with any Power Device
(PD) that also supports the IEEE 802.3af / at standards. The models
bellowed are included:
Model PoE Standard Max. PoE
Out
Power
In
Pass-thru.
Speed
POE-151 IEEE 802.3af 15.4 Watts 48V DC 10/100Mbps
POE-152 IEEE 802.3af 15.4 Watts 48V DC 10/100/1000Mbps
POE-161 IEEE 802.3at / af 30 Watts 56V DC 10/100/1000Mbps
Unless specied, terms of “PoE Injector” in the following sections
means the model listed above.
2. Package Contents
Upon open the box of the PoE Injector and carefully unpack it. The box
should contain the following items:
POE-151 / POE-152 POE-161
The 802.3af PoE Injectorl
x 1
User’s Manual x 1l
DC 48V Power Adapter x 1l
The 802.3at High Power over Ethernetl
Injector x 1
User’s Manual x 1l
DC 56V Power Adapter x 1l
Power Cord x 1l
Note
If any of these pieces are missing or damaged, please
contact your dealer immediately. If possible, retain the
carton including the original packing material, and use
them again to repack the product in case of a need to
return for repair.
1-2
English
3. Product Outlook
POE-151 / POE-152
There are two RJ-45 Twisted-Pair jack, one DC 48V Power socket and
two LED indicators.
48V DC
Ethernet
Power over Ethernet Injector
IEEE 802.3af
PoE
PWR Ethernet+DC
PoE-IEEE 802.3af
Ready
Power in-use
Figure 1: POE-151 / POE-152
POE-161
There are two RJ-45 Twisted-Pair jack, one DC 56V Power socket and
two LED indicators.
Figure 2: POE-161 Overview
4. LED Indication
LED Description
Power Lights to indicate that the PoE Injector has power
from AC-DC adapter.
PoE In-use Lights to indicate the PoE Injector is providing DC
in-line power.
1-3
English
5. Hardware Installation
This section describes the hardware features of PoE Injector. Before
connecting any network device to the PoE Injector,refertothischapter
carefully.
5.1 Before Installation
Before your installation, it is recommended to check your network
environment. The PLANET PoE Injector is with an AC-DC adapter and
inject the DC power into the pin of the twisted pair cable follow the IEEE
standard,thepowerandpinassignmentrelationshipisthetablebelow:
Model Required AC-DC adapter
Spec. PoE Pin Assignment
POE-151 Input: 100~240V AC
Output: 48V DC
4/5(+),7/8(-)
POE-152 1/2(+),3/6(-)
POE-161 Input: 100~240C AC
Output: 56V DC 4/5(+),7/8(-)
Category 5/5e/6 UTP/STP cable that with 8-wire are required for the
installation. UTP cable with 4-wire (pin 1/2, 3/6) can not work with
POE-151/161 and only can work with POE-152 in 10/100Base-TX
Ethernet.
Note
PLANET PoE Injector and PLANET PoE Splitter (ex.
POE-151S, POE-152S and POE-162S) can be installed
in pair. Use of third-party device is allowed if the device
complied with IEEE 802.3at or IEEE 802.3af standard.
5.2 PoE Injector Installation
1.Connect a standard network cable from Switch/workstation to
“Ethernet” port of PoE Injector.
2.Connect the long cable that will be used to connect to the remote
device to the port “Ethernet+DC”.
3. Connect the AC adapter to “DC 48V” of POE-151/POE-152. The
power LED will be steady on. Connect the AC adapter to “DC 56V” of
POE-161. The power LED will be steady on.
1-4
English
4.Connect with IEEE 802.3af devices. Base on IEEE 802.3af standard,
the POE-151/POE-152 can directly connect with any IEEE 802.3af
end-nodes like wireless access point, VoIP phones and IP camera that
support IEEE 802.3af Power over Ethernet interface.
Note
ForPOE-161,baseonIEEE802.3atstandard,thePOE-161
can directly connect with any IEEE 802.3at end-nodes such
as PTZ (Pan, Tilt & Zoom) IP camera, Speed Dome, high
power consumption wireless LAN access point that support
IEEE 802.3at Power over Ethernet port.
Ethernet Switch
100 meters
PoE IP Camera
POE-151/152
PoE Injector
Power
Power Line (DC)
100Base-TX UTP
100Base-TX UTP with PoE
PoE
DC
Power Line (AC)
AC
PoE
Power
Data
Data
DC
PoE
PWR Ethernet+DC
PoE-IEEE 802.3af
Ready
Power in-use
48V DC
Ethernet
AC
Figure 3: Connection to IEEE 802.3af Device
5.Once POE-151/POE-152 detects the existence of an IEEE 802.3af
device, the LED indicator will be steady ON to shows it is providing
power. The same to POE-161 that detects the existence of an IEEE
802.3at / af device.
Note
If the connected device is not fully complying with IEEE
802.3af standard, the LED indicator of POE-151/POE-152
will not be steady on.
Note
1. Since the POE-161 PoE port supports 56V DC PoE
power output, please check and assure the Powered
Device (PD) acceptable DC power range is from 52 to
56V DC. Otherwise, it will damage the Powered Device
(PD).
2. If the connected device is not fully complying with IEEE
802.3at / af Power over Ethernet, the LED indicator of
POE-161 will not be steady on.
1-5
English
5.3 PoE Injector and PoE Splitter Installation
FornonPoEremotedeviceorEthernetequipment,thePoE Injector and
PoE SplittercanrunsinpairtoprovideDCPowerforthosedevices,the
table below shows the model of PLANET PoE Splitters:
Model PoE Standard DC Power Out Pass-thru. Speed
POE-151S IEEE 802.3af 5V / 12V DC 10/100Mbps
POE-152S IEEE 802.3af 5V / 12V DC 10/100/1000Mbps
POE-162S IEEE 802.3at 12V / 24V DC 10/100/1000Mbps
1.Followstep1,step2andstep3ofSection5.2fortheconnection.
2. Connect the UTP cable in the package from “Ethernet” of the PoE
splitter to the RJ-45 port of remote device.
3. Connect proper DC plug from “DC OUT” of PoE Splitter to the remote
device.
100 meters
DC
100Base-TX UTP
DC Power Line (DC)
AC Power Line (AC)
PoE 100Base-TX UTP with PoE
Data
Power
Data
Wireless AP
PoE
Power
Data
Ethernet Switch
POE-151/152
PoE Injector
POE-151S
PoE Splitter
PoE
Ethernet+DC
PoE-IEEE 802.3af
Ready
Power in-use
DC OUT
Ethernet 5V 12V
Power
DC
AC
Figure 4: Connection Architecture via PoE Injector and PoE Splitter
Note
Please ensure the PoE Splitter output voltage is correct
before applying power to remote device otherwise, it may
damage the remote device.
1-6
English
6.ProductSpecication
Product POE-151 POE-152 POE-161
HardwareSpecication
Interface
“Data” Input Port 1 x RJ-45 STP
“PoE
(Data+Power)”
Output Port
1 x RJ-45 STP
DC Input power
socket 1 x 48V DC 1 x 56V DC
LED Indicator System: Power x 1 (Yellow)
PoE Port: PoE in Use x 1 (Green)
System:
Power x 1 (Green)
PoE Port:
PoE in Use x 1
(Green)
Network Cable UTPCat.5/5e/6,upto100m(328ft)
Data Rate 10/100Mbps 10/100/1000Mbps 10/100/1000Mbps
Dimension (W x D x H) 73 x 55 x 24 mm 73 x 55 x 24 mm 95 x 70 x 25 mm
Weight 50g 50g 83g
Unit Input Voltage DC48V,0.4A DC48V,0.4A DC56V,0.53A
Power Requirement 100-240VAC,50/60Hz
Power Consumption 15.4 Watts max. 15.4 Watts max. 30 Watts max.
Power over Ethernet
PoE Standard IEEE 802.3af Power over Ethernet / PSE
IEEE 802.3at / af
Power over Ethernet
/ PSE
PoE Power Output DC 48V / 15.4 Watts DC 56V / 30 Watts
PoE Power supply Type Mid-Span End-Span Mid-Span
Power Pin Assignment 4/5(+),7/8(-) 1/2(+),3/6(-) 4/5(+),7/8(-)
Standards Conformance
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX
Fast Ethernet
IEEE 802.3ab 1000Base-T
Gigabit Ethernet -
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet - -
Regulation Compliance FCCClassB,CE
mark
FCCClassB,CE
mark
FCCClassA,CE
mark
Environment
Operating Temperature 0 ~ 50 Degree C
Storage Temperature -10 ~ 70 Degree C
Humidity 5 ~ 90% (Non-condensing)
Altri manuali per POE-151
2
Questo manuale è adatto per i seguenti modelli
5
Indice
Altri manuali Planet Adattatore
Planet
Planet VPA-100 Manuale utente
Planet
Planet WNL-U553 Manuale utente
Planet
Planet ENW-3502-FC Manuale utente
Planet
Planet POE-161 Manuale utente
Planet
Planet 802.11g Wireless USB Adapter WLU-356L Manuale utente
Planet
Planet WL-U356R Manuale utente
Planet
Planet ENW-9606 Manuale utente
Planet
Planet ENW-9702 Manuale utente
Planet
Planet ENW-9801 Manuale utente
Planet
Planet ENW-980X Series Manuale utente
Planet
Planet ENW-9801 Manuale utente
Planet
Planet WTV-3000 Manuale utente
Planet
Planet BT-510U Manuale utente
Planet
Planet WNL-U554 Manuale utente
Planet
Planet ENW-3700 Manuale utente
Planet
Planet Pre-N Wireless USB 2.0 Adapter WNL-U550 Manuale utente
Planet
Planet WL-U357 Manuale utente
Planet
Planet DMA-100W Manuale utente
Planet
Planet WNL-U554M Manuale utente
Planet
Planet PL-102U Manuale utente
