Planet IVC-2004PT Manuale utente

PoE Industrial Ethernet Extender

IVC-2004PT

User’s Manual

Trademarks

Contents are subject to revision without prior notice.

PLANET is a registered trademark of PLANET Technology Corp. The

information in this manual is subject to change without notice. All other

trademarks belong to their respective owners.

Disclaimer

PLANET Technology does not warrant that the hardware will work

properly in all environments and applications, and makes no warranty

and representation, either implied or expressed, with respect to

the quality, performance, merchantability, or tness for a particular

purpose.

PLANET has made every effort to ensure that this User’s Manual is

accurate; PLANET disclaims liability for any inaccuracies or omissions

that may have occurred.

Information in this User’s Manual is subject to change without notice

and does not represent a commitment on the part of PLANET. PLANET

assumes no responsibility for any inaccuracies that may be contained in

this User’s Manual. PLANET makes no commitment to update or keep

current the information in this User’s Manual, and reserves the right

to make improvements to this User’s Manual and/or to the products

described in this User’s Manual, at any time without notice.

FCC Warning

This equipment has been tested and found to comply with the

regulations for a Class A digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in

a commercial environment. This equipment generates, uses, and

can radiate radio frequency energy and, if not installed and used in

accordance with this user’s guide, may cause harmful interference to

radio communications. Operation of this equipment in a residential area

is likely to cause harmful interference, in which case the user will be

required to correct the interference at his own expense.

CE Mark Warning

This is a Class A product. In a domestic environment, this product may

cause radio interference, in which case the user may be required to

take adequate measures.

WEEE Warning

To avoid the potential effects on the environment and human

health as a result of the presence of hazardous substances in

electrical and electronic equipment, end users of electrical

and electronic equipment should understand the meaning of

the crossed-out wheeled bin symbol. Do not dispose of WEEE as

unsorted municipal waste and have to collect such WEEE separately.

Revision

PLANET PoE Industrial Ethernet Extender User's Manual

For Model: IVC-2004PT

Rev 2.0 (March, 2014)

Part No.: 2350-AH0350-003

Table Of Contents

1. Introduction.............................................................................. 5

1.1 Checklist ............................................................................ 5

1.2 Ethernet over VDSL2 Bridge Description ............................... 5

1.3 Key Features ...................................................................... 7

1.4 Specications ..................................................................... 8

2. Hardware Description................................................................11

2.1 Front Panel .......................................................................11

2.1.1 LED Indicators for IVC-2004PT..................................12

2.1.2 DIP Switch Indication ...............................................13

2.2 The Upper Panel ................................................................14

3. Installation .............................................................................15

3.1 Installing PoE Industrial Ethernet Extender – IVC-2004PT......15

3.2 IVC-2004PT BNC / RJ-11 Proper Connection ........................16

3.3 IVC-2004PT Application Connection .....................................17

3.4 Wiring the Power Inputs.....................................................20

3.5 Wiring the Fault Alarm Contact ...........................................21

3.6 Mounting Installation..........................................................22

3.6.1 DIN-Rail Mounting....................................................22

3.6.2 Wall Mount Plate Mounting .......................................24

4. Troubleshooting ........................................................................25

5. FAQ ........................................................................................26

1. Introduction

1.1 Checklist

Check the contents of your package for the following parts:

zPoE Industrial Ethernet Extender x 1

zUser’s Manual x 1

zDIN Rail Kit

zWall Mount Kit

If any of these items are missing or damaged, please contact your

dealer immediately; if possible, retain the carton including the original

packing material, and use them again to repack the product in case

there is a need to return it to us for repair.

1.2 Ethernet over VDSL2 Bridge Description

PLANET's state-of-the-art Ethernet-over-VDSL2 products are based on

two core networking technologies: Ethernet and VDSL2 (Very-high-

data-rate Digital Subscriber Line 2). This technology offers the

absolute fastest possible data transmission speeds over the existing

copper telephone lines or coaxial cables without the need for rewiring.

The IVC-2004PT PoE Industrial Ethernet Extender has a switching

architecture with 4 PoE of RJ-45 10/100Mbps ports and Asymmetric

or Symmetric Ethernet over VDSL port (Asymmetric means upstream

and downstream rate are not the same and Symmetric means

upstream and downstream rate are similar) – the VDSL port can be

RJ-11 or BNC Connector. The IVC-2004PT can set to Master or Slave

mode via a DIP switch. When IVC-2004PT (RJ-11) is connected with

another IVC-2004PT device, the performance will go up to 99/63Mbps

for asymmetric data rate within 200m and go up to 28/2Mbps at

1.4km. The IVC-2004PT (BNC) performance is up to 99/65Mbps for

asymmetric data rate within 200m and up to 31/4Mbps at 2.4km. This

capability is ideal for use as an Ethernet extender for your existing

Ethernet network.

With 4 PoE interfaces, the IVC-2004PT will be ideal for small

businesses and workgroups requiring to deploy the PoE for the wireless

access points, IP-based surveillance camera or IP phones in any places

easily, efciently and cost-effectively.

The IVC-2004PT PoE Industrial Ethernet Extender with the IP-30

aluminum metal shape is designed for easy deployment in Heavy

Industrial demanding environments.

PLANET PoE Industrial Ethernet Extender provides a lower cost

replacement and smooth migration for the existing Long Reach

Ethernet (LRE) networks.

The cable specications of the connection are listed as follows:

z10Base-T, Category 3, 4 or 5 UTP

z100Base-TX, Category 5, 5e or 6 UTP

zEthernet over VDSL2, Twisted-pair Telephone Wires

zEthernet over VDSL2, Coaxial Cable

Note

Slave device (CPE) must be connected to Master device

(CO) through the telephone wire or coaxial cable. It does

not allow connection like Master to Master or Slave to

Slave. To check whether the IVC-2004PT is connected to

Master or Slave, please refer to section 2.1.2 for more

details.

1.3 Key Features

The PoE Industrial Ethernet Extender provides the following key

features:

z4-port IEEE 802.3af Power over Ethernet Standard

zEach PoE port provides 15.4 watts

zCompatible with IVC-2002, VC-201A and VC-202A (17a Prole)

zCost-effective VDSL2 Master / Slave bridge solution via DIP Switch

zSelectable BNC and RJ-11 mode for the data transmission

z-40 to 75 degrees C operating temperature

zRedundant Power Design: 24V or 48V DC, redundant power with

polarity reverse protect function

zIP30 aluminum metal case protection

zDenes Asymmetric (Band Plan 998) and Symmetric band plans for

the transmission of Upstream and Downstream signals

zComplies with IEEE 802.3, IEEE 802.3u and IEEE 802.3x standards

zDMT (Discrete Multi-Tone) line coding

zHalf duplex back pressure and IEEE 802.3x full duplex fause frame

ow control

zSupports up to 1536 bytes packet size, 802.1Q VLAN tag transparent

zIntegrated address look-up engine, supporting 2K absolute MAC

addresses

zVDSL2 Stand-alone transceiver for simple bridge modem application

zSelectable Target Band Plan and Target SNR Margin

zSupport extensive LED indicators for network diagnostics

zDIN Rail and Wall-mount design

1.4 Specications

Product IVC-2004PT

Hardware Specications

Ports

10/100 Base-TX 4 x RJ-45, Auto-Negotiation and Auto-MDI/MDI-X

PoE 4 x PoE (Port1 ~ Port4)

VDSL 1 x RJ-11, female Phone Jack

1 x BNC, female connector

DIP Switch 4 position DIP switch

Functionality *1

Master / Slave mode select

Selectable BNC and RJ-11 mode

Selectable target Band Plan

Selectable target SNR mode

Encoding

VDSL-DMT

- ITU-T G.997.1

- ITU-T G.993.1 VDSL

- ITU-T G.993.2 VDSL2 (Prole 17a Support)

LED Indicators

P1 (Green)

P2 (Green)

Fault (Green)

Master (Green) and Slave (Green)

ACT (Green)

Sync. (Green)

PoE ( Orange)

Power

Over

Ethernet

PoE Standard IEEE 802.3af Power over Ethernet / PSE

PoE Type End-Span

PoE Power

Input 24V or 48V DC power input source

PoE Power

Output 48V DC Per Port, 350mA . Max. 15.4 watts

PoE Pin

Assignment 1/2(+), 3/6(-)

Cabling

Ethernet

• 10Base-T: 2-pair UTP Cat.3,4,5 up to 100m

(328ft)

• 100Base-TX: 2-pair UTP Cat.5, 5e, 6 up to

100m (328ft)

VDSL (RJ-11) Twisted-pair telephone wires (AWG24 or better)

up to 1.4km

BNC 50 ohm: RG58A/U, RG58C/U, RG58/U and 75

ohm: RG6 (Distance 2.4km)

Performance *2

(Downstream /

Upstream)

Asymmetric Mode

VDSL (RJ-11) BNC

200m -> 99/63Mbps

400m -> 91/48Mbps

600m -> 71/32Mbps

800m -> 53/18Mbps

1000m -> 38/8Mbps

1200m -> 33/5Mbps

1400m -> 28/2Mbps

200m -> 99/65Mbps

400m -> 99/64Mbps

600m -> 97/59Mbps

800m -> 94/51Mbps

1000m -> 84/45Mbps

1200m -> 73/37Mbps

1400m -> 61/28Mbps

1600m -> 54/20Mbps

1800m -> 48/13Mbps

2000m -> 39/9Mbps

2200m -> 35/6Mbps

2400m -> 31/4Mbps

Symmetric Mode

VDSL (RJ-11)

BNC

200m -> 91/99Mbps

400m -> 74/79Mbps

600m -> 54/51Mbps

800m -> 38/34Mbps

1000m -> 27/21Mbps

1200m -> 24/15Mbps

1400m -> 21/10Mbps

200m -> 95/99Mbps

400m -> 92/97Mbps

600m -> 81/82Mbps

800m -> 71/70Mbps

1000m -> 60/57Mbps

1200m -> 50/44Mbps

1400m -> 42/33Mbps

1600m -> 37/27Mbps

1800m -> 29/22Mbps

2000m -> 23/21Mbps

2200m -> 19/17Mbps

2400m -> 19/13Mbps

Dimensions (H x W x D) 135mm x 87.8mm x 50mm

Weight 631g

Power Requirements

24V or 48V DC for PoE Devices

Redundant power with polarity reverse protection

function

Power Consumption /

Dissipation

66.4 watts / 226BTU max. (PoE)

5.64 watts / 19.24BTU (non-PoE)

Installation DIN Rail Kit and Wall-mount Ear

Standard Conformance

Stability Testing

IEC60068-2-32 (Free Fall)

IEC60068-2-27 (Shock)

IEC60068-2-6 (Vibration)

Operating Temperature -40 ~ 75ºC

Storage Temperature -40 ~ 85ºC

Operating Humidity 10% to 90%, relative humidity, non-condensing

Storage Humidity 10% to 90%, relative humidity, non-condensing

Regulation Compliance FCC Part 15 Class A, CE

Standards Compliance

IEEE 802.3 10Base-T

IEEE 802.3u 100Base-TX

IEEE 802.3af Power over Ethernet

IEEE 802.3x Full duplex pause frame ow control

ITU-T

1. G.997.1

2. G.993.1 VDSL

3. G.993.2 VDSL2 (Prole 17a)

*1. BNC and RJ-11 mode must switch to the same position for Master

and Slave. Otherwise, it may cause unstability.

*2. The actual data rate will vary on the quality of the copper wire and

environment factors.

Indice

Altri manuali Planet Estensione

Planet

Planet POE-E301 Manuale utente

Planet

Planet IVC-4011-T-V2 Manuale utente

Planet

Planet WGS-E304PT Manuale utente

Planet

Planet IPOE-E174 Manuale utente

Planet

Planet WNAP-1110 Manuale utente

Planet

Planet LRE-104 Manuale utente

Planet

Planet LRP-104CET Manuale utente

Planet

Planet LRP-101CE Manuale utente

Planet

Planet IHD-410PT Manuale utente

Planet

Planet VC-205PT Manuale utente

Planet

Planet WAP-7500 Manuale dell'operatore

Planet

Planet LRE-101C Manuale utente

Planet

Planet POE-E304 Manuale utente

Planet

Planet POE-E201 Manuale utente

Planet

Planet WNAP-C3220 Manuale utente

Planet

Planet IPOE-E172 Manuale utente

Planet

Planet IPOE-E202 Manuale utente

Planet

Planet WNAP-1110 Manuale dell'operatore

Planet

Planet WBT-1000 Manuale utente

Planet

Planet WTB-1000 Manuale utente

Planet

Planet PL-510W Manuale utente

Planet

Planet IHD-200PT Manuale utente

Planet

Planet IPOE-E174 Manuale utente

Planet

Planet VC-203PT Manuale utente

Manuali Estensione popolari di altre marche

SY HDBT-60T Manuale utente

Appsys ProAudio

Appsys ProAudio ADX-16 Manuale utente

Atlona

Atlona RS232 Manuale utente

IDK

IDK OPF-TH1000-A Manuale utente

Enable-IT

Enable-IT 824WP Manuale utente

Worx

Worx Landroid RadioLink WA0864 Scheda tecnica

TP-Link

TP-Link TL-WA730RE Manuale utente

Camplex

Camplex CMX-HDMI-SFPL Manuale utente

SC&T

SC&T HE03-4K Manuale utente

Marmitek

Marmitek MegaView70 Manuale utente

Samsung

Samsung SCS-26UC4 Manuale utente

Foxun

Foxun SX-GES24 Manuale utente

MuxLab

MuxLab 500771 Manuale utente

foxunhd

foxunhd SX-AEX01 Manuale utente

TERK Technologies

TERK Technologies LFIRX2 Manuale utente

Devolo

Devolo Audio Extender Manuale

Edimax

Edimax EW-7438RPn V2 Manuale utente

Shinybow USA

Shinybow USA SB-6335T5 Manuale utente