Planet FGSD-1022VHP Manuale utente

8/16/24-Port 10/100TX 802.3at PoE

+ 2-Port Gigabit TP/SFP Combo Ethernet Switch

FGSD-1022VHP/FGSW-1822VHP/FGSW-2622VHP

User’s Manual

Trademarks

Contents are subject to revision without prior notice.

PLANET is a registered trademark of PLANET Technology Corp. All other

trademarks belong to their respective owners.

Disclaimer

PLANET Technology does not warrant that the hardware will work properly in all

environments and applications, and makes no warranty and representation, either

implied or expressed, with respect to the quality, performance, merchantability, or

tness for a particular purpose.

PLANET has made every effort to ensure that this User’s Manual is accurate;

PLANET disclaims liability for any inaccuracies or omissions that may have

occurred.

Information in this User’s Manual is subject to change without notice and does not

represent a commitment on the part of PLANET. PLANET assumes no responsibility

for any inaccuracies that may be contained in this User’s Manual. PLANET makes

no commitment to update or keep current the information in this User’s Manual,

and reserves the right to make improvements to this User’s Manual and/or to the

products described in this User’s Manual, at any time without notice.

If you nd information in this manual that is incorrect, misleading, or incomplete,

we would appreciate your comments and suggestions.

FCC Warning

This equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with

the Instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at

his own expense.

CE Mark Warning

This is a Class A product. In a domestic environment, this product may cause radio

interference, in which case the user may be required to take adequate measures.

Energy Saving Note of the Device

This power required device does not support Standby mode operation. For energy

saving, please remove the power cable to disconnect the device from the power

circuit. Without removing power cable, the device will still consume power from the

power source. In view of Saving the Energy and reducing the unnecessary power

consumption, it is strongly suggested to remove the power connection from the

device if this device is not intended to be active.

WEEE Warning

To avoid the potential effects on the environment and human health as a

result of the presence of hazardous substances in electrical and electronic

equipment, end users of electrical and electronic equipment should

understand the meaning of the crossed-out wheeled bin symbol. Do not

dispose of WEEE as unsorted municipal waste and have to collect such WEEE

separately.

Revision

PLANET 8/16/24-Port 10/100TX 802.3at PoE+ 2-Port Gigabit TP/SFP Combo Ethernet

Switch User’s Manual

Models: FGSD-1022VHP, FGSW-1822VHP, FGSW-2622VHP

Revision: 1.0 (January, 2016)

Part No.: 2351-AK3230-000

Table of Contents

1. Introduction ............................................................................................... 5

1.1 Package Contents ................................................................................ 5

1.2 Product Description.............................................................................. 6

1.3 Features ............................................................................................. 8

1.4 Specications .....................................................................................10

2. Hardware Description .................................................................................12

2.1 Front Panel ........................................................................................12

2.1.1 LCD Monitor Indicators ..............................................................15

2.1.2 LED Indicators ..........................................................................17

2.2 Rear Panel .........................................................................................18

3. Hardware Installation .................................................................................19

3.1 Desktop Installation ............................................................................20

3.2 Rack Mounting ...................................................................................21

3.3 Installing the SFP Transceiver ..............................................................22

3.4 Product Applications............................................................................25

3.5 Power over Ethernet Powered Devices ..................................................26

4. Power over Ethernet Overview ....................................................................27

5. Troubleshooting .........................................................................................30

Appendix A Networking Connection ..................................................................31

A.1 Switch’s Data RJ45 Pin Assignments - 1000Mbps, 1000BASE-T...............31

A.2 10/100Mbps, 10/100BASE-TX ..............................................................31

1. Introduction

Thank you for purchasing PLANET 8/16/24-Port 10/100TX 802.3at PoE+ 2-Port

Gigabit TP/SFP Combo Ethernet Switch series, FGSD-1022VHP, FGSW-1822VHP and

FGSW-2622VHP. The descriptions of these models are shown below:

FGSD-1022VHP 8-Port 10/100TX 802.3at PoE + 2-Port Gigabit TP/SFP Combo

Desktop Switch

FGSW-1822VHP 16-Port 10/100TX 802.3at PoE + 2-Port Gigabit TP/SFP Combo

Ethernet Switch

FGSW-2622VHP 24-Port 10/100TX 802.3at PoE + 2-Port Gigabit TP/SFP Combo

Ethernet Switch

“802.3at PoE+ Switch” is used as an alternative name in this user’s manual.

1.1 Package Contents

Open the box of the 802.3at PoE+ Switch and carefully unpack it. The box should

contain the following items:

802.3at PoE+ Switch x 1 User’s Manual x 1

Power Cord x 1 Accessories x 1

If any of these pieces are missing or damaged, please contact your dealer

immediately; if possible, retain the carton including the original packing material,

and use them again to repack the product in case there is a need to return it to us

for repair.

1.2 Product Description

Ideal Cost-effective Integration Solution for Secure IP Surveillance

Infrastructure

Particularly designed for the growing popular IP surveillance applications, PLANET

FGSD/FGSW 802.3at PoE+ Switch series is positioned as a surveillance switch with

the central power management and IP camera monitoring.

The FGSD/FGSW 802.3at PoE+ Switch series brings an ideal, secure surveillance

system at a lower total cost. The FGSD/FGSW 802.3at PoE+ Switch series provides

multiple 10/100Mbps 802.3at/af PoE ports able to feed sufcient PoE power for

IEEE 802.3at PoE IP cameras at the same time. It is also able to be connected

with an 8/16/32-channel NVR system, uplinked to the backbone switch and the

monitoring center. With such a high-performance switch architecture, the recorded

video les from the PoE IP cameras can be saved in the NVR system to enable the

administrators to control and monitor the surveillance images both in the local LAN

and the remote sites.

Model FGSD-1022VHP FGSW-1822VHP FGSW-2622VHP

10/100TX Copper 8 x RJ45 16 x RJ45 24 x RJ45

10/100/1000T Copper 2 x RJ45 2 x RJ45 2 x RJ45

1000X Fiber Optic 2 x SFP Slots 2 x SFP Slots 2 x SFP Slots

802.3at/af PoE+ Ports 816 24

PoE Budget 120 watts 300 watts 300 watts

Enclosure 12” metal case 19” metal case 19” metal case

Centralized Power Management for Security and Public Service PoE

Applications

To fulll the needs of the high power consumption of PoE network applications, the

FGSD/FGSW 802.3at PoE+ Switch series features the standard IEEE 802.3at Power

over Ethernet Plus (PoE+) that combines up to 30 watts of power output and data

per port over one Cat5E/6 Ethernet cable. It is designed specically to meet the

demand of the high power consumption of network PDs (powered devices) such

as IR, PTZ, speed dome cameras and even box-type IP cameras with built-in fan

and heater. Compliant with both 802.3at and 802.3af standards, the FGSD/FGSW

802.3at PoE+ Switch series allows more exibility in power requirement for a

variety of PDs, making installation costs affordable.

LCD Monitor for Real-time PoE Usage and System Status Display

The LCD monitor of the FGSD/FGSW 802.3at PoE+ Switch series clearly shows the

levels of PoE power usage and system status, such as overload, low voltage, over

voltage and high temperature. With its brand-new LCD monitor, user is able to

obtain detailed information about real-time PoE power usage and real-time system

status of the FGSD/FGSW 802.3at PoE+ Switch series.

PWR

PoE Port Status

5 9 13 17 21

3 7 11 15 19 23 25

Gigabit

PoE

2 6 10 14 18 22

4 8 12 16 20 24

PoE

FGSW-2622VHP

24-Port 10/100TX 802.3at PoE +2-Port Gigabit

Ethernet Switch

4 6 82

1357

PoE In-Use

ACTLNK

1000

ACTLNK

100

12 14 1610

9 11 13 15

20 22 2418

17 19 21 23

Standard

VLAN

PoE Port Status Power Over-voltage Protection Power Over Temperature ProtectionPower Low-voltage Protection

Easy Installation and Cable Connection

As data transfer and High Power PoE are transmitted over a cable, the FGSD/

FGSW 802.3at PoE+ Switch series is able to reduce the need of extended cables

and electrical outlets on the wall, ceiling or any unreachable place. It helps to

lower the installation costs and simplify the installation effort. All RJ45 copper

interfaces of the FGSD/FGSW 802.3at PoE+ Switch series support 10/100Mbps

and 10/100/1000Mbps auto-negotiation for optimal speed detection through RJ45

Category 6, 5 or 5e cable. It also supports standard auto-MDI/MDI-X that can

detect the type of connection to any Ethernet device without requiring special

straight-through or crossover cables.

Flexible and Extendable Uplink Solution

The FGSD/FGSW 802.3at PoE+ Switch series provides 2 extra Gigabit TP/SFP

combo interfaces supporting 10/100/1000BASE-T RJ45 copper for surveillance

network devices such as NVR, video streaming server or NAS to facilitate

surveillance management. Or through these Gigabit speed ber SFP slots, the

1000BASE-SX/LX SFP (Small Form-factor Pluggable) ber transceiver is inserted to

be uplinked to a backbone switch and monitoring center over a long distance. The

distance can be extended from 550m to 2km (multi-mode ber), even going up to

above 10/20/30/40/50/60/70/120km (single-mode ber or WDM ber). They are

well suited for applications within the enterprise data centers and distributions.

1.3 Features

Physical Port

FGSD-1022VHP

8-port 10/100BASE-TX Fast Ethernet RJ45 copper

2 10/100/1000BASE-T TP and 2 1000BASE-X mini-GBIC SFP shared

combo interfaces

FGSW-1822VHP

16-port 10/100BASE-TX Fast Ethernet RJ45 copper

2 10/100/1000BASE-T TP and 2 1000BASE-X mini-GBIC SFP shared

combo interfaces

FGSW-2622VHP

24-port 10/100BASE-TX Fast Ethernet RJ45 copper

2 10/100/1000BASE-T TP and 2 1000BASE-X mini-GBIC SFP shared

combo interfaces

Power over Ethernet

Complies with IEEE 802.3af/at Power over Ethernet end-span PSE

Up to 8/16/24 ports of IEEE 802.3af/802.3at devices powered

Supports PoE Power up to 30.8 watts for each PoE port

Each port supports 53V DC power to PoE Powered Device (FGSD-1022VHP)

120-watt PoE budget (FGSD-1022VHP)

Each port supports 54V DC power to PoE Powered Device (FGSW-1822VHP or

FGSW-2622VHP)

300-watt PoE budget (FGSW-1822VHP or FGSW-2622VHP)

Auto detects powered device (PD)

Circuit protection prevents power interference between ports

Remote power feeding up to 100m with standard mode

Switching

Hardware based 10/100Mbps or 10/100/1000Mbps auto-negotiation and auto

MDI/MDI-X

Flow control for full duplex operation and back pressure for half duplex operation

Integrates address look-up engine, supporting 4K absolute MAC addresses

IEEE 802.1Q VLAN transparency

Hardware DIP switch for “Standard”, “VLAN” and “Extend” mode selection; the

“Extend” mode features 30-watt PoE transmit distance of 250m at speed of

10Mbps and VLAN isolation (FGSD-1022VHP only)

Hardware DIP switch for “Standard” and “VLAN” mode selection, the “VLAN”

mode for IP surveillance application (FGSW-1822VHP or FGSW-2622VHP only)

Solid DIP switch to isolate ports to prevent broadcast storm and defend DHCP

spoong

Automatic address learning and address aging

Hardware

12/19-inch desktop size, 1U height, rack mountable

LED indicators for system power, per port PoE ready and PoE activity, speed,

Link/Act

LCD Monitor for system status and PoE usage status display

1 silent fan to provide stable and efcient power performance (FGSD-1022VHP)

2 silent fans to provide stable and efcient power performance (FGSW-1822VHP

or FGSW-2622VHP)

1.4 Specications

Model FGSD-1022VHP FGSW-1822VHP FGSW-2622VHP

Hardware Specications

802.3af/802.3at PoE Injector

Port 816 24

10/100BASE-TX MDI/

MDIX Ports 816 24

10/100/1000BASE-T MDI/

MDIX Ports 2 (Combo Port)

1000BASE-X SFP/mini-GBIC

Slots 2 (Combo Port)

DIP Switch 1

Switch Architecture Store-and-Forward

Switch Fabric 5.6Gbps/

non-blocking

7.2Gbps/

non-blocking

8.8Gbps/

non-blocking

Switch Throughput@64

bytes

4.16Mpps@64

bytes

5.35Mpps@64

bytes

6.54Mpps@64

bytes

MAC Address Table 4K entries

Maximum Frame Size 1536 bytes

Flow Control IEEE 802.3x pause frame for full-duplex;

back pressure for half-duplex

LED

System: Power (Green)

10/100BASE-TX RJ45 Interfaces:

10/100Mbps LNK/ACT (Green)

PoE-in-Use (Orange)

10/100/1000BASE-T RJ45/SFP Interfaces:

LNK/ACT (Green)

100/1000 (Green)

LCD Monitor (W x D) 39.5mm x 24.8mm

System Status/PoE Usage Port Status

Dimensions (W x D x H) 180 x 280 x 44

mm (1U height) 233 x 440 x 44 mm (1U height)

Enclosure Metal

Weight 1.8kg 3.2kg 3.3kg

Power Requirements

AC 100~240V,

50/60Hz, 2.5A

max.

100~240V AC, 50/60Hz, 5A max.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Planet Router di rete

Planet

Planet FSD-805 Manuale utente

Planet

Planet GSW-1601 Manuale utente

Planet

Planet FWA-2100-NR Manuale utente

Planet

Planet FGSW-2620 Manuale utente

Planet

Planet IGS-5225-16T4S Manuale utente

Planet

Planet IGS-20040MT Manuale utente

Planet

Planet ADSL Firewall Router ADE-4120 Manuale utente

Planet

Planet ERT-805 Manuale utente

Planet

Planet SW-501 Manuale utente

Planet

Planet XRT-401F Manuale utente

Planet

Planet ADW-4301A/B Manuale utente

Planet

Planet ADN-4101 Manuale utente

Planet

Planet G.SHDSL.bis Bridge Router GRT-504 Manuale utente

Planet

Planet WGSW-404 Manuale utente

Planet

Planet EPN-102 Manuale utente

Planet

Planet 85M Powerline to Ethernet Bridge with 4-Port Switch... Manuale utente

Planet

Planet WGS-804HP Manuale utente

Planet

Planet ADW-4401 A/B Manuale utente

Planet

Planet GSW-1600HP Manuale utente

Planet

Planet FGSW-1822VHP Manuale utente

Planet

Planet ISW-800M Manuale utente

Planet

Planet ADE-3400v4 Manuale utente

Planet

Planet VIP-462DG Manuale utente

Planet

Planet WAP-200N Manuale utente

Manuali Router di rete popolari di altre marche

Allnet

Allnet ALL0333AU Manuale utente

HomeSeer

HomeSeer HT-SEL Manuale utente

Sercomm

Sercomm Genesis OC3505D Manuale utente

Billion

Billion BIPAC 5102 Series Manuale utente

TP-Link

TP-Link TD-8817 Manuale utente

Motorola

Motorola MR1900 Manuale utente

Digi

Digi IX14 Manuale utente

Cisco

Cisco NCS 540 Manuale

XAVi

XAVi X8821e Manuale utente

BEC

BEC 6200WZL Manuale utente

MikroTik

MikroTik hAP ac3 Series Manuale utente

Korenix

Korenix JetNet 5428G Series Manuale utente

NETGEAR

NETGEAR FS526T - Switch Manuale utente

Korenix

Korenix JetNet 5710G Series Manuale utente

Automated Logic

Automated Logic ZN551 Manuale del proprietario

Cisco

Cisco ASR 1000 Series Manuale dell'operatore

EnGenius

EnGenius ESR-9710 Manuale utente

Cisco

Cisco 805 Series Istruzioni operative e di sicurezza