Planet MFB-Series Manuale utente
PLANET Fiber Transceiver
MFB-Series / MGB-Series / MTB-Series
User’s Manual
- 2 -
Trademarks
Copyright ©PLANET Technology Corp. 2014
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp.
All other trademarks belong to their respective owners.
Disclaimer
PLANET Technology does not warrant that the hardware will work properly in all environments and
applications, and makes no warranty and representation, either implied or expressed, with respect to the
quality, performance, merchantability, or tness for a particular purpose.
PLANET has made every effort to ensure that this User’s Manual is accurate; PLANET disclaims liability
for any inaccuracies or omissions that may have occurred.
Information in this User’s Manual is subject to change without notice and does not represent a
commitment on the part of PLANET. PLANET assumes no responsibility for any inaccuracies that may
be contained in this User’s Manual. PLANET makes no commitment to update or keep current the
- 3 -
information in this User’s Manual, and reserves the right to make improvements to this User’s Manual
and/or to the products described in this User’s Manual, at any time without notice.
If you nd information in this manual that is incorrect, misleading, or incomplete, we would appreciate
your comments and suggestions.
FCC Warning
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the Instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
- 4 -
CE Mark Warning
This is a Class A product. In a domestic environment, this product may cause radio interference, in
which case the user may be required to take adequate measures.
WEEE Warning
To avoid the potential effects on the environment and human health as a result of the
presence of hazardous substances in electrical and electronic equipment, end users of
electrical and electronic equipment should understand the meaning of the crossed-out
wheeled bin symbol. Do not dispose of WEEE as unsorted municipal waste and have to
collect such WEEE separately.
Revision
User's Manual for PLANET SFP / SFP+ / XFP Mini-GBIC Transceiver
For Models: MFB-SERIES / MGB-SERIES / MTB-SERIES
Rev: 1.9 (June 2014)
Part No: 2010-AG0220-007
- 5 -
Table of Contents
1. Overview ....................................................................................................................................................6
2. Checklist..................................................................................................................................................... 7
3. Introduction and Model List....................................................................................................................... 8
3-1 The MFB-Series Mini-GBIC Transceiver Module List ......................................................................8
3-2 The MGB-Series Mini-GBIC Transceiver Module List....................................................................12
3-3 The MTB-Series Mini-GBIC Transceiver Module List ....................................................................17
4. Installing SFP / SFP+ / XFP Transceiver Module..................................................................................20
4-1 Install the SFP / SFP+ Mini-GBIC Transceiver Module .................................................................20
4-2 Install the 10GBase-LR / SR XFP Fiber Optic Module MTB-XSR / MTB-XLR............................ 21
4-3 Remove the SFP / SFP+ / XFP Transceiver Module .................................................................... 22
Appendix A.....................................................................................................................................................23
A.1 Fiber Optic Cable Connection Parameters.....................................................................................23
Safety Notice .................................................................................................................................................24
- 6 -
1. Overview
Thank you for purchasing PLANET SFP / SFP+ / XFP Mini-GBIC Transceiver which includes the
Ethernet module of the MFB / MGB and MTB families.
The MFB family Fast Ethernet SFP module can be installed into PLANET Switch products with
100Base-FX SFP interface. The distance can be extended from 2km (Multi-mode, LC) up to 120
kilometers (Single-mode, LC).
The MGB family Gigabit Ethernet SFP module can be installed into PLANET Switch products with
1000Base-SX/LX SFP interface. The distance can be extended from 100 meters (TP), 550 meters
(Multi-mode, LC), up to 120 kilometers (Single-mode, LC).
The MTB family 10G Ethernet SFP+ / XFP module can be installed into PLANET products with 10G
SFP+ / XFP interface. The distance can be extended from 300 meters (Multi-mode, LC), up to 10
kilometers (Single-mode, LC).
- 7 -
2. Checklist
Your SFP / SFP+ / XFP Package should contain the following items:
zThe SFP / SFP+ / XFP Transceiver Module x 1
zThe User’s Manual x 1
If any item is missing or damaged, please consult the dealer from whom you purchased your SFP /
SFP+ / XFP Mini-GBIC Ethernet transceiver module.
- 8 -
3. Introduction and Model List
3-1 The MFB-Series Mini-GBIC Transceiver Module List
Fast Ethernet Transceiver (100Base-X SFP)
Model Speed (Mbps) Connector Interface Fiber Mode Distance Wavelength (nm) Operating Temp.
MFB-FX 100 LC Multi-Mode 2km 1310nm 0 ~ 60 ºC
MFB-F20 100 LC Single Mode 20km 1310nm 0 ~ 60 ºC
MFB-F40 100 LC Single Mode 40km 1310nm 0 ~ 60 ºC
MFB-F60 100 LC Single Mode 60km 1310nm 0 ~ 60 ºC
MFB-F120 100 LC Single Mode 120km 1550nm 0 ~ 60 ºC
MFB-TFX 100 LC Multi-Mode 2km 1310nm -40 ~ 75 ºC
MFB-TF20 100 LC Single Mode 20km 1550nm -40 ~ 75 ºC
- 9 -
Fast Ethernet Transceiver (100Base-BX, Single Fiber Bi-Directional SFP)
Model Speed
(Mbps)
Connector
Interface Fiber Mode Distance Wavelength (TX) Wavelength (RX) Operating
Temp.
MFB-FA20 100 WDM (LC) Single Mode 20km 1310nm 1550nm 0 ~ 60 ºC
MFB-FB20 100 WDM (LC) Single Mode 20km 1550nm 1310nm 0 ~ 60 ºC
MFB-TFA20 100 WDM (LC) Single Mode 20km 1310nm 1550nm -40~75 ºC
MFB-TFB20 100 WDM (LC) Single Mode 20km 1550nm 1310nm -40~75 ºC
MFB-TFA40 100 WDM (LC) Single Mode 40km 1310nm 1550nm -40~75 ºC
MFB-TFB40 100 WDM (LC) Single Mode 40km 1550nm 1310nm -40~75 ºC
- 10 -
1. When shorter distance of single mode fiber cables is used, you might need to insert
an in-line optical attenuator in the link to avoid overloading the receiver: Follow the
I-TUT G652 document to imitate the fiber cable length.
2. The attenuation coefficient that mentioned in the following chapters is for reference
only.
Attenuation coefcient
Wavelength region Typical link value
1260nm-1360nm 0.5 dB/km
1530nm-1565nm 0.4 dB/km
Questo manuale è adatto per i seguenti modelli
53
Indice
Altri manuali Planet Ricetrasmettitore
