Planet ADW-4302 Manuale utente

Package Contents

The following items should be included:

• The ADSL2/2+ Wireless VPN Firewall Router Unit

• 1 Cat-5 Ethernet (LAN) cable

• 1 RJ-11 (ADSL) cable

• Power Adapter

• Quick Installation Guide

• CD-ROM containing the on-line manual.

If any of the above items are damaged or missing, please contact your dealer

immediately.

Physical Details

Front-mounted LEDs

PWR LED On - Power on.

Off - No power.

STATUS

LED

Off - Normal operation.

Blinking - This LED blinks during start up, and during a Firm-

ware Upgrade.

LAN For each port, there are 2 LEDs, to indicate the connection speed

(10Base-T or 100Base-T) of each port.

• 100 LNK/ACT - This will be ON if the LAN connection is us-

ing 100Base-T, and Blinking if data is being transferred via

the corresponding LAN port.

• 10 LNK/ACT - This will be ON if the LAN connection is using

10Base-T, and Blinking if data is being transferred via the

corresponding LAN port.

• If neither LED is on, there is no active connection on the

corresponding LAN port.

WLAN LED On – Wireless enabled.

Off - No Wireless connections currently exist.

Flashing - Data is being transmitted or received via the Wire-

less access point. This includes “network traffic” as well as user

data.

ADSL On - ADSL connection is available.

Off - No ADSL connection.

Flashing - Data is being transmitted or received via the ADSL

connection.

Internet On - Internet connection is available.

Off - No Internet connection available.

Flashing - Data is being transmitted or received.

Rear Panel

Power port Connect the supplied power adapter here.

10/100BaseT

LAN connections

Use standard LAN cables (RJ-45 connectors) to con-

nect your PCs to these ports.

Reset Button

(Reset to Defaults)

This button will reset the ADW-4302v2 to the factory

default settings.

To do this, press and hold the Reset Button for ﬁve (5)

seconds, until the Status LED is lit, then release the Reset

Button, and wait the ADW-4302v2 to restart using the

factory default values.

ADSL port Connect this port to your ADSL line.

Installation Procedure

1. Choose an Installation Site

Select a suitable place on the network to install the ADW-4302v2.

NOTE:

For best Wireless reception and performance, the ADW-

4302v2 should be positioned in a central location with mini-

mum obstructions between the ADW-4302v2 and the PCs.

Also, if using multiple Access Points, adjacent Access Points

should use different Channels.

2. Connect LAN Cables

Use standard LAN cables to connect PCs to the Switching Hub ports on the

ADW-4302v2. Both 10Base-T and 100Base-TX connections can be used si-

multaneously.

If required, connect any port to a normal port on another Hub, using a stan-

dard LAN cable. Any LAN port on the ADW-4302v2 will automatically function

as an “Uplink” port when required.

3. Connect ADSL Cable

Connect the supplied ADSL cable from to the WAN port on the ADW-4302v2

(the RJ-11 connector) to the ADSL terminator provided by your phone com-

pany.

4. Power Up

Connect the supplied power adapter to the ADW-4302v2 and power up.

Use only the power adapter provided. Using a different one may cause hard-

ware damage.

5. Check the LEDs

• The POWER LED should be ON.

• The STATUS LED should be flash, then turn Off. If it stays on or blinking after

60 seconds, there is a hardware error.

• For each LAN (PC) connection, one of the LAN LEDs should be ON (provided the

PC is also ON.)

• The WLAN LED should be ON

• The ADSL LED should be ON if ADSL line is connected.

Conﬁguration

The ADW-4302v2 contains a HTTP server. This enables you to connect and conﬁgure to it

with using the Web Browser. Your Browser must support JavaScript.

The conﬁguration program has been tested on the following browsers:

• Netscape V4.08 or later

• Netscape 7

• Internet Explorer V5.01 or later

Preparation

Before attempting to conﬁgure the ADW-4302v2, please ensure that:

• Your PC can establish a physical connection to the ADW-4302v2. The PC and

the ADW-4302v2 must be directly connected (using the Hub ports on the ADW-

4302v2) or on the same LAN segment.

• The ADW-4302v2 must be installed and powered ON.

• If the ADW-4302v2’s default IP Address (192.168.0.1) is already used by an-

other device, the other device must be turned OFF until the ADW-4302v2 is

allocated a new IP Address during configuration.

Using your Web Browser

To establish a connection from your PC to the ADW-4302v2:

1. After installing the ADW-4302v2 in your LAN, start your PC. If your PC is al-

ready running, restart it.

2. Start your WEB browser.

3. In the Address box, enter “HTTP://” and the IP Address of the ADW-4302v2, as

in this example, which uses the ADW-4302v2’s default IP Address:

HTTP://192.168.0.1

4. When prompted for the User name and Password, enter default user name

admin and password admin.

Setup Wizard

1. Step through the Wizard until finished.

• You need the data supplied by your ISP. Most connection methods require

some data input.

• The common connection types are explained in the following table.

2. On the final screen of the Wizard, run the test and check that an Internet con-

nection can be established.

3. If the connection test fails:

• Check all connections, and the front panel LEDs.

• Check that you have entered all data correctly.

Common Connection Types

Type Details ISP Data required

Dynamic

IP Address

Your IP Address

is allocated

automatically,

when you con-

nect to you ISP.

a) ADSL parameters (VPI and VCI)

may be required, if they cannot be

detected automatically.

b) Some ISP’s may require you to use

a particular Hostname or Domain

name, or MAC (physical) address.

Static (Fixed)

IP Address

Your ISP allo-

cates a perma-

nent IP Address

to you.

Usually, the

connection is

“Always on”.

a) ADSL parameters (VPI and VCI)

may be required, if they cannot be

detected automatically.

b) IP Address allocated to you, and re-

lated information, such as Network

Mask, Gateway IP address, and

DNS address.

PPPoE, PPPoA You connect to

the ISP only

when required.

The IP address

is usually

allocated

automatically.

a) ADSL parameters (VPI and VCI)

may be required, if they cannot be

detected automatically.

b) User name and password are al-

ways required.

c) If using a Static (Fixed) IP address,

you need the IP address and re-

lated information (Network Mask,

Gateway IP address, and DNS ad-

dress)

IPoA

(IP over ATM)

Normally, the

connection is

“Always on”.

a) ADSL parameters (VPI and VCI)

may be required, if they cannot be

detected automatically.

b) IP Address allocated to you, and re-

lated information, such as Network

Mask, Gateway IP address, and

DNS address.

Home Screen

After ﬁnishing the Setup Wizard, you will see the Home screen. When you connect in

future, you will see this screen when you connect. An example screen is shown below.

Further information

If you still have problem on connecting to your ISP, please check the user’s manual on the

bundled CD for detail conﬁguration.

If you have any other questions, please contact the Dealer where you purchased this

product or you can contact PLANET directly at the following email address: support@planet.

com.tw

This page is intentionally left blank

Indice

Altri manuali Planet Router wireless

Planet

Planet WRT-625G Manuale utente

Planet

Planet WNRT-625 Istruzioni per il montaggio

Planet

Planet WRT-410A Manuale utente

Planet

Planet ADN-4101 Manuale utente

Planet

Planet WNRT-617G Manuale utente

Planet

Planet WRT-416 Manuale utente

Planet

Planet WNRT-320GS Manuale utente

Planet

Planet WNRT-620 Manuale utente

Planet

Planet XRT-401E Manuale utente

Planet

Planet ADN-4100 Manuale utente

Planet

Planet WRT-414 Manuale utente

Planet

Planet Pre-N Wireless Router WNRT-610 Manuale utente

Planet

Planet WNRT-625 Manuale utente

Planet

Planet WRT-416 Manuale utente

Planet

Planet WRT-405 Manuale utente

Planet

Planet FRT-405N Manuale utente

Planet

Planet WRT-410A Manuale utente

Planet

Planet WNRT-627 Manuale utente

Planet

Planet WNAP-7200 Manuale utente

Planet

Planet WNRT-300 Manuale utente

Planet

Planet WRNT-626 Manuale utente

Planet

Planet WNRT-617G Manuale utente

Planet

Planet WNRT-625 Manuale utente

Planet

Planet WNRT-626G Manuale utente

Manuali Router wireless popolari di altre marche

Milesight

Milesight UG67 Manuale utente

Airlogic

Airlogic AirSync Class 1 Manuale del proprietario

Samsung

Samsung WCH730B Manuale utente

TELEFONICA

TELEFONICA USB Adapter Manuale utente

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Manuale utente

Askey

Askey RAC2V1K Manuale utente

Alloy

Alloy WLF2454AP-S Manuale utente

TP-Link

TP-Link TL-WR542G Manuale utente

NETGEAR

NETGEAR WNR2000v4 Manuale utente

Hama

Hama 53120 Manuale utente

Intellinet

Intellinet 524582 Manuale utente

Asus

Asus RT-N10P Manuale utente

D-Link

D-Link DIR-506L Manuale utente

Sapido

Sapido GR297n Manuale utente

Asus

Asus DSL-N55U Manuale utente

AMTC

AMTC WR7502 Manuale utente

Compaq

Compaq CP-2W - iPAQ Connection Point Manuale utente

SMC Networks

SMC Networks WBR14-N2 FICHE Manuale utente