Planika FLA 2 Manuale utente

USER’S MANUAL

FLA 2 model E#4

Manufactured by:

Planika Sp. z o.o.

ul. Bydgoska 38

86-06 Brzoza

Poland

Edition i1108#09 as of 16.11.2017

Serial number greater than P6499 17

IT IS OBLIGATORY TO READ AND KEEP THIS INSTRUCTION MANUAL.

TABLE OF CONTENTS

I. General information .................................................................................................................................................. 3

II. Fuel ............................................................................................................................................................................ 3

III. Safety ......................................................................................................................................................................... 4

IV. Operation .................................................................................................................................................................. 5

A. Operating elements .............................................................................................................................................. 5

B. Initial start-up of the de ice .................................................................................................................................. 6

C. Flame size regulation ............................................................................................................................................ 7

D. De ice extinguishing ............................................................................................................................................. 7

E. Subsequent start up .............................................................................................................................................. 7

F. FAST START function ............................................................................................................................................. 8

G. Information and warning alert .............................................................................................................................. 8

V. Cleaning and maintenance ...................................................................................................................................... 10

VI. Disposal and recycling ............................................................................................................................................. 10

VII. Ser ice ..................................................................................................................................................................... 10

I. General information

FLA 2 model E is not a heating device, but modern decorative device that uses the beauty of a real flame. ue to the innovative

technology operation of FLA 2 model E is simple and safe.

II. Fuel

To ensure the safety of the device it has to be refilled with recommended FANOLA® liquid or other in accordance with European

Union directive N.162/2013 for 86-96,6% ethanol with contaminators regarding density, viscosity and electrical conductivity.

These properties must be identical to the properties of recommended FANOLA® liquid. For more information please contact the

manufacturer.

Use of any other fuel is strictly forbidden, as it may lead to improper operation of the device, damages and hazard to health and

safety of its operators. Manufacturer will not accept any responsibility in case of using any other fuel than recommended

(i.e dehydrator and/or super purified ethanol with more than 96,6% ethanol volume) or any other which doesn’t meet above

mentioned properties.

Explanation of symbols is placed on the placed on the flap of the device:

It is forbidden to pour fuel into a burning device!

It is forbidden to pour fuel into a hot device!

FANOLA ® - additional information:

Warning symbols:

H225: Highly flammable liquid and vapors

H319: May be skin irritant

H336 - The substance can cause sleepiness, dizziness

Warning markings:

R-11 - Highly flammable liquid

Operational notes:

S-2 – Store beyond children's reach

S-7 - Keep container tightly closed

S-16 - Keep away from sources of ignition - No smoking

S-46 – In case of ingestion immediately seek medical advice – show the package or label

This mark stands for information which one needs to acquaint with.

This mark stands for warnings which one needs to acquaint with.

III. Safety

As FLA 2 model E produce a real open fire it is necessary to follow the below specified rules in order to enable the product

to be used in a technically correct and safe manner as well as to maintain the warranty.

• When installing the device according to the instructions you must comply with national and local regulations.

• It is required to read the installation instructions in order not to use the device in an improper manner or in rooms with

smaller cubic capacity than required.

• Products should not be exposed to atmospheric conditions. It’s the product for internal use only.

• When turned on the device produce steam carbon dioxide and heat therefore it’s necessary to provide adequate

ventilation so that the total replacement of the air in the room is min. 1 / h.

• Do not use the device in the temperature lower than 10°C and higher than 30°C.

• Do not install the device in areas of large drafts of air near fans vents etc.

• Do not install the device on escape routes and in places where there may be potentially explosive atmospheres.

• The device as well as the fuel should be kept out of reach of children pets and unauthorized persons.

• It is forbidden to consume the fuel. Avoid contact with skin and eyes.

• It is required to take precautions when dealing with flammable materials for example in direct contact with object

or in area within 1 m / 3.28 ft. around the device no flammable objects should be placed. Do not place near the curtains

blinds etc.

• Do not place on the grid any elements not provided by the producer.

• It is necessary to place dry-powder or carbon dioxide extinguisher near the device.

• The device should be installed only on flat level and firm surface.

• Positioning the device on a sloping ground may cause malfunction damage to the device or fire.

• It is forbidden to use other fuel than recommended fuel FANOLA or the fuel recommended in section II Supplies and

consumables.

• Do not heat the fuel before the heating process of the device is started.

• Do not start the device in case of spillage of fuel out of the tank.

• Never pour fuel directly into the flame tray as this may cause damage to the device and result in fire. Such an attempt

may cause violent ignition result in fire burns and can even be life threatening.

• Do not cover the device while it is switched on.

• Do not operate near the fuel filler while the device is switched on.

• Do not operate with the components contained within the flame tray under the threat of burns or damage to the device.

• Do not move the device while it is switched on. The device can be moved only after the complete combustion of the fuel

when it is disconnected from power supply and when all its elements are cooled.

• The device should not be left without adult supervision while it is switched on.

• The device should be kept out of reach of untrained users.

• The device must be switched on and used as per description in point IV in instructions.

• While switching on the device the odor of fuel may be perceptible.

• The device is not suitable for continuous operation. If the device suddenly turns off proceed in accordance with the

instruction.

CAUTION!

• Glowing coil is heated to a temperature of 1300 ° C. Touching when the device is switched on may cause burns.

• While working the flame tray is heated to high temperatures. Do not touch the flame tray or hot parts located in close

area under the risk of burn injury.

• The first startup of the device can be made only after proper installation of the device and reading the manual.

• If the device requires transport it is required to burn all fuel remains and move it in a horizontal position avoid tilting it.

As the unburned fuel remains in the combustion chamber during the transfer sensors could be activated. In this case

the device could be used again only after it has dried completely.

It is forbidden to make any repairs or changes in the device. Repairs may be made only by professional technician.

IV. Operation

This manual contains all the information necessary for the proper operation of the FLA 2 model E. It is obligatory to read and

keep this instruction manual.

Operation of the device is permitted only after the device is properly installed according to the instructions and the manual.

A. Operating elements

Control Panel

START

STOP

READYFUEL

HOT

ERROR

PAT.

PEND.

ECO

Fire grate

ontrol panel display

placed

under a

lid

Fanola filler bolt

Furnace

Glowing coil

Service USB input hidden

under a cap

Starts the device from

standby mode or switches

to the standby

Switches to ECO

mode

The red indicator The blue indicator

The green indicator

Tempered glass

B. Initial start-up of the device

1. On the control panel the blue light flashes

it indicates the lack of fuel in the tank. Please refuel.

2. Refuelling. For refuelling please use the automatic fuel pump provided with the

FLA 2 model E.

Before use please read the instructions written on the pump.

LE Sound

signal

Open the filler fuel flap placed on the right side of the FLA 2

model E. The diode will start to blink and you will hear the

intermediate sound.

Push the metal connector of flexible hose dynamically into

the matching socket under the fuel flap. Properly attached

fuel connector should make a click sound. Plug the automatic

fuel pump power cord to the matching socket underneath

the fuel filler flap. Both should be placed firmly in their place.

Place the stiff tube in the external fuel container from which

the fuel will be pumped out into the FLA 2 model E’s fuel

tank.

To start the automatic pump squeeze the rubber manual

pump several times until you will hear the buzzing noise.

Automatic fuel pump will start working once the fuel reaches the sensor inside the black box. Pump will cease the refuelling

process once:

a) FLA 2 model E’s fuel tank will be full. LE diode will start to blink and you will hear the intermediate sound.

b) The external fuel tank will be empty. In this case, connect another external fuel tank and re-pour or finish.

If you want to finish the refuelling disconnect the power connector. Hold the fuel hose connector and press the metal plate under

it (marked with a red circle) The connector will be released. Please be aware, that some fuel can still be present in the fuel hose

after releasing. Close the fuel filler lid.

F U E L

FUEL

After closing down the fuel filler flap the LED lights on FLA 2 model E will indicate:

− FLA 2 model E is ready to use

−

Too little fuel was pumped repeat refueling.

3. Starting the device. The green indicator flashes on the control panel .

3.1. Press the START/STOP button on the control panel and hold it until you hear the sound signal.

3.2 The green led READY will start blinking to indicate starting the device and the filament will start to glow. Wait until

the fire appears.

3.3. While the appliance is in work mode the green indicator goes off and the flame starts to appear. The device works

automatically until they run out of fuel or disable the device by the user.

Depending on the temperature and amount of fuel the startup sequence may take up to 10 minutes. When the LEDs are off they

will go out.

C. Flame size regulation

The FLA 2 model E can operate in two modes: Normal and ECO. The device always starts with a standard flame size. The device

has the adjustable flame size during operation.

In order to reduce the height of the flame press the ECO button. You will hear two beeps and the ECO button will be highlighted.

The unit is now operating in ECO mode.

To return to the normal height of the flame press the ECO button you will hear one beep and the ECO button backlight turns off.

The device is now in normal mode.

ATTENTION! It might take a few moments for the flame to adjust.

ATTENTION! The device switches to ECO mode by itself when there is a danger of over-temperature of the device.

D. Device extinguishing

Press the START/STOP button on the control panel. You will hear two beeps and the red indicator will start to blink.

The blinking red indicator means that the device is too hot to be restarted. When the device cools the message will disappear and

depending on the amount of the fuel in the tank either the green indicator will flash and indicate the readiness for operation or

the blue indicator will indicate the lack of the fuel.

E. Subsequent start up

If on the control panel flashes the blue FUEL indicator start to run the product from the point B.2.

If on the control panel flashes the green READY indicator you can:

• start to run the product from the point B.3.

• fill the fuel in accordance with B.2 paragraph.

READY

F U E L

READY

HOT

F U E L

READY

During pouring be careful not to spill out the fuel. If the fuel is spilled error message

may be displayed.

Go to step F and follow the guidance provided in the table. I the spillage is excessive the source o

power needs to be disconnected.

READYFUEL

HOT

F. FAST START unction

With the FAST START function turned on the waiting time for flame is shortened during the device start up. START UP function is

factory-set.

START UP function is possible to be turned on or turned off only when the green led is lit on the control panel

To disable FAST START hold down ECO button for about 10 s until you hear 4 beeps.

To re-enable the FAST START function hold down ECO button for about 10s until you hear 2 beeps.

WARNING! With FAST START function enabled the device consumes 100 W of energy.

G. In ormation and warning alert

In order to increase safety the FLA 2 model E is equipped with an electronic system to keep the operation safe. In the case of a

dangerous situation the device immediately triggers alarms.

LE END:

READYFUELHOT

HOT

The indicator is off

The indicator flashes

The indicator is blinking

Information and warning alerts

Lp. Control Panel

Indicators

SOUND

SIGNALS

Event Procedure

constant

intermittent

If the fire is not visible - NO

POWER.

Make sure the device is properly connected to the po er

supply.

If you see a fire - the device is

in operation. Do not leave the device unattended by an adult.

The device is ready for

operation. You can run the device in accordance ith section B.3

No fuel in the tank Fill the fuel in accordance ith B.2 paragraph

Initial start-up of the device

Wait for the appearance of fire, the light goes off.

Works protected against too

rapid restart of the hot device

or the allo able temperature

has been exceeded

Allo the device to cool do n. After cooling the device,

the red indicator ill turn off and the green indicator ill

start to flash.

The device automatically

turns off due to lack of fuel in

the tank.

Allo the device to cool do n. After cooling the device,

the red indicator ill turn off

The device is ready for

refuelling. Fill the fuel in accordance ith B.2 paragraph.

The fuel tank is full ( ith

intermediate sound).

Disconnect the fuel hose. Close the filler bolt.The blue

indicator ill turn off, the green one ill start to flash.

There as a fuel spill or

If refueling process is in progress it ill cease

automatically. Disconnect the automatic pump. Press the

START / STOP button on the control panel to turn off the

sound. If the spillage is e cessive the source of power

needs to be disconnected Wait at least 1 hour to

evaporate the remaining moisture and then close the

fuel filler bolt. If the alarm message reappears, ait a

little bit longer until the rest of the moisture evaporates.

If the message reappears, contact your service provider.

The time given for the flame

to appear has been exceeded

If the alarm message appears during the start of the

device, press the START / STOP button to turn off the

sound and hold the ECO button for about 5 seconds.

If the message reappears, contact your service provider.

Operation error

Press the START / STOP button to turn off the sound and

hold the ECO button for about 10 seconds.

If the message reappears, contact your service provider.

The device temperature

belo 10°C or critical

operation error

Press the START / STOP button to turn off the sound.

Provide higher ambient temperature. Wait until the

device obtains the indoor temperature. Hold do n the

ECO button for about 10 seconds.

If the message reappears, contact your service provider.

Too much liquid in the tank

Shut the filler bolt. Press the START / STOP button to turn

off the sound and hold the ECO button for about 10

seconds. If the message reappears, contact your service

provider.

Fuel filler lid opened

during start up sequence

or ork of the device

Shut the filler bolt. Press the START / STOP button to turn

off the sound and hold the ECO button for about 10

seconds. If the message reappears, contact your service

provider.

READYFUELHOT

READYFUEL

HOT

READYFUEL

HOT

READYFUELHOT

READYFUEL

HOT

READYFUEL

HOT

READYFUEL

HOT

READYFUEL

HOT

READYFUEL

HOT

READYFUEL

HOT

READYFUEL

HOT

READYFUELHOT

V. Cleaning and maintenance

Switch off the device before cleaning. Wait until the temperature of the device gets close to the ambient temperature. To maintain

appropriate technical condition of the device please observe the following rules:

•

Lacquer coating the furnace is not resistant to abrasion. It is not recommended to wipe the surface.

•

Clean the furnace with a soft cloth and water to avoid causing cracks and scratches

When purchasing and dozing cleaners be sure to protect the environment and comply with the recommendations of

manufacturers.

It is forbidden to clean the inside of the device by unauthorized persons.

The manufacturer does not foresee a situation where it will be necessary to clean elements not normally available.

The manufacturer is not liable for damage resulting from:



improper operation (non-manual)



self-dismantling



attempts to modify



using other liquids than those recommended in point II. Fuel.

VI. Disposal and recycling

The product is equipped with parts made of aluminium steel plastics and electronics. If you need to dispose of the device follow

the terms of disposal and recycling in force in your country.

Moreover dispose of the empty Fanola containers should be dumped to plastic waste baskets.

Most of the materials used in Planika appliances can be recycled.

FANOLA® fuel recommended for this product has received following certifications:

VII. Service

If you have any technical problems or some questions please do not hesitate to contact your distributor or visit our page

www.planikafires.com/service and follow the instructions on the page.

Indice

Altri manuali Planika Camino da interno

Planika

Planika L-Fire Manuale utente

Planika

Planika Galio Star Corten Manuale utente

Planika

Planika HotBox Manuale utente

Planika

Planika WallFire Manuale utente

Planika

Planika PrimeFire 4 Manuale utente

Planika

Planika Scandi Manuale utente

Planika

Planika Basket Fire Logs Manuale utente

Planika

Planika ZEN High Manuale utente

Planika

Planika Chantico Glassfire Manuale utente

Planika

Planika Arcticon Manuale utente

Planika

Planika Fire Line Automatic 3 Manuale utente

Planika

Planika Galaxy Burner Manuale operativo

Planika

Planika FORMA Series Manuale utente

Planika

Planika NEO Burner 500 Manuale utente

Planika

Planika FLA 2 E#4 Manuale utente

Planika

Planika Prime Fire Manuale utente

Planika

Planika Jar Manuale utente

Planika

Planika WallFire Manuale utente

Planika

Planika FLA 3 Manuale utente

Planika

Planika Fire Line Automatic 3 Manuale utente

Planika

Planika L-Fire Manuale utente

Planika

Planika Pure Flame Manuale utente

Planika

Planika Rondo Automatic Manuale utente

Planika

Planika Porto Manuale utente

Manuali Camino da interno popolari di altre marche

Brigantia

Brigantia 35-DVRS31N-2 Manuale del proprietario

Nordpeis

Nordpeis Bergen Manuale utente

Superior

Superior BCT2536TMN Manuale utente

Quadra-Fire

Quadra-Fire 5100I-GD-B Manuale utente

Renaissance

Renaissance RUMFORD 1000 Manuale utente

Lacunza

Lacunza IV-800 Manuale utente

Baxi

Baxi 940 Istruzioni per l’uso

Dru

Dru Maestro 60/2 Tall RCH Manuale utente

Diamond Fireglass

Diamond Fireglass SS-O22 Manuale utente

HearthStone

HearthStone Windsor Bay 8830 Manuale di programmazione

Napoleon

Napoleon ASCENT B42 Manuale utente

Enviro

Enviro E33GI Manuale utente

Smeg

Smeg L30 FABE Istruzioni di montaggio

KEDDY

KEDDY K700 Manuale utente

Godin

Godin 3451 Manuale utente

Jøtul

Jøtul Jotul GI 535 DV IPI New Harbor Manuale utente

Austro Flamm

Austro Flamm Heidi Back 2.0 945048 Manuale utente

Desa

Desa CCFPDFT Manuale operativo