Plantronics BLACKWIRE C420 Manuale utente

Getting started:

Follow the steps below to get call answer/end controls

with your Blackwire headset and Cisco® Unified

Communications Integration for Microsoft® Lync™.

1. Connect your headset to the computer. If this is

the first time you are connecting, wait for the

installation process to complete.

2. To get call control features, please download

the latest version of Plantronics software at

plantronics.com/software.

Note: Check with your IT staff before installing software

on your computer.

Configuring Cisco Unified Communications Integration

for Microsoft Lync to always route call audio to the

headset:

3. In the Cisco window, click the Settings button.

4. Then in the Cisco UC Options window, select

Audio.

5. Next select your Plantronics headset as the

default device for both Microphone and

Speakers.

6. Now you can select which device plays your

incoming call alerts by selecting an option for

Ringtone. These sounds typically route through

your PC speakers, but can come through your

Plantronics headset if you prefer.

7. In this screen you can also adjust Speakers and

Ringtone volume levels.

8. When you are finished, click OK.

Note: USB configuration settings are unique for each USB port.

If you connect the headset to a different port you will need to

make these changes again to set behavior for that USB port.

Blackwire®C420™Quick Setup Guide

Welcome:

Using a Plantronics Blackwire headset for PC

calls will deliver a simpler, more comfortable

and better sounding audio experience than

you could get using just your computer’s

internal microphone and speaker.

©2011 Plantronics, Inc. All rights reserved, Plantronics, the logo design, Blackwire and C420 are trademarks or registered trademarks of Plantronics, Inc. Cisco is a registered trademark of Cisco Systems Inc. and/or its affiliates in the U.S. and other

countries. Microsoft and Lync are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Published 10.11

Blackwire C420 Key Features:

Wideband for best PC audio telephony

Folds flat and tucks into carrying case

for use on the go

Dynamic EQ stereo automatically

adjusts for voice and multimedia use

Noise-canceling microphone filters out

background noise

Control Functions:

A. Mute Microphone

B. Volume Adjust

C. Call Answer/End



Making and Receiving Calls with Cisco Unified Communications Integration for Microsoft Lync

To MAKE a call:

To call an existing contact, click on the

contact (1), drag (2) and drop it (3) onto the

Cisco window.

You can also enter a phone number manually

using the search box located at the top of the

main Lync window (4). After you enter the

number, drag (5) and drop the number onto

the Cisco window (6).

When a call is placed, a call window will

open (7), and the audio will be routed to your

headset.

To END a call:

To end a call, use the controls on your

headset or press the red phone icon in the

call window (8).

To RECEIVE a call:

When you receive a call, a notification window

will appear on your computer screen (9).

To answer the call, use the controls on your

headset or click the phone icon in the call

notification window (10).

countries. Microsoft and Lync are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Published 10.11