Platinum CCTV PT-BF5421-T Manuale
Human Temperature Measurement Camera
Installation and Setup
Preparation
Overview
1
2
3Installation
4
5
6
Configuration
Installation Checklist
FAQ
Overview | Application scenarios
•This camera is ideal for installation as a pre-screening method to be placed in areas where personnel are on duty to conduct
further screening of body temperature and to enact company protocols when individuals are found to have abnormal skin
temperatures. This solution is popular in places like passenger stations, railway stations, subway stations, airports,
manufacturing facilities, hospitals and any other security check entrances. It is recommended to deploy our PT-BF5421-T
camera and blackbody (real-time calibration tool) at each entrance of the facilities to ensure that all persons must pass
through an inspection point. This camera has a built-in configurable audio and visible light to alert when persons are found
above the expected temperature and can be connected directly to a laptop or computer for viewing through a web browser,
or optionally connected through our MicroNVR or AVM NVR software for recording and additional alerting capabilities.
When properly installed and configured, this camera provides accuracy of ±0.3°C / ±0.54°F at normal body temperatures.
This is the reason it is important to follow these directions for proper configuration and setup.
Airport Station Hospital Enterprise
This product is not a medical device and is not intended for use in the diagnosis, cure, mitigation, treatment or prevention of any disease or other medical condition.
Overview | Your Pre-Screening Plan
The PT-BF5421-T camera should be used as a pre-screening device as a part of your building or business security plan.
Visitors
Security Line Non Contact
Body Temp.
Measurement
Pass
Normal
Abnormal
Staff Review Start Your
Emergency Plan
Abnormal
Confirmation
This product is not a medical device and is not intended for use in the diagnosis, cure, mitigation, treatment or prevention of any disease or other medical condition.
Overview | Topology
Solution 1：
PT-BF5421-T Camera + Blackbody
+ Laptop/PC Local Access
Solution 2：
PT-BF-5421-T Camera +
Blackbody + MicroNVR + TV/LCD +
Laptop for Remote Access and Alerting
Note: Laptop, TV, Monitor, PoE Switch and Cabling shown for layout only. Not included with purchase.
Overview | Products
Temperature measurement
Blackbody
Working temperature: 40.0 ℃
(ring temperature + 5.0 ℃~ 50.0 ℃
adjustable)
Temperature resolution: 0.1 ℃
Temperature measurement accuracy:
±0.2 ℃(single point)
Temperature stability:
±(0.1 ～0.2) ℃/ 30min
Effective emissivity: 0.97 ±0.02
Power supply: 220VAC 50Hz
Ambient temperature and humidity: 0
~ 40 ℃/ ≤ 80% RH
Uncooled vanadium oxide infrared focal
plane detector
Detector resolution: 400*300
Spectrum range: 8 μ m ~ 14 μ M
Thermal imaging lens: 13mm
Temperature measurement range:
30 ℃~ 45 ℃
Thermal sensitivity: ≤ 50mk @ f / 1.0
Visible light: 1 / 2.8 "CMOS
Sound warning:
Built in white warning light & audible alert
Resolution: 1080p
Temperature measurement accuracy:
±0.54°F (0.3 ℃) with blackbody
±1.8°F (1.0 ℃) without blackbody
Optional adjustable tripod design with
Special camera and blackbody
mounting plates are ideal for fast-
deployment and easy adjustment.
Please protect camera and blackbody
From being bumped/knocked over
To prevent damage and to ensure
proper calibration of both devices.
Adjustable Tripods (optional) Permanent Brackets (optional)
Optional junction boxes and pole
mount brackets may be used to
permanently affix the camera and
blackbody to the building masonry or
structure poles to keep them in
position for permanent or semi-
permanent use.
The optional MicroNVR with Advanced
Video Management software extends
the features and functionality of the
Thermal camera. It provides the ability
to monitor the Thermal camera output
from multiple PCs/Macs/Laptops and
phones from anywhere in the world
(when connected to the internet). The
MicroNVR also provides the ability to
configure email, pop up and text alerts
to notify key personnel when
individuals outside normal body temp
range have entered the facility.
AVM MicroNVR
Thermal Network Bullet Camera
PT-BF5421-T
Overview | Solution Features
Easy deployment
Thermal camera + Blackbody
+ ordinary PC constitutes a
quickly deployed body
temperature pre-screening
station. Optional tripods
make setup even easier.
Safety
Non-contact thermography to
avoid the risk of cross
infection during pre-screening
process. This makes it a key
component of a complete
security solution for
businesses and
transportation.
High-efficiency
Stop the long lines and
difficult delays. By scanning
quickly, this thermal camera
allows people to move at
normal speeds (detection
times down to 1 sec)
High detection rate
The head detection
temperature measurement
can avoid the interference of
other non-human targets,
and the temperature
measurement accuracy can
reach ±0.54 °F with
blackbody
Advanced Alerting
When combined with our
AVM NVR software or
MicroNVR recorder with
AVM software, alerts can be
not only heard and seen at
the camera, but from
anywhere with authorized
users over the internet.
Preparation
Overview
1
3Installation
4
5
6
Configuration
FAQ
2
Installation Checklist
Preparation | Survey
•The installation area shall be a relatively isolated and stable environment without wind or rapid changing ambient temperatures.
Avoid outdoor areas for best accuracy. It is not suitable for environments with strong air flow, rapid ambient temperature changes or
strong electromagnetic interference or vibration.
•Position the camera so that the flow of traffic is towards the camera to ensure the camera can detect the temperature of people with
their forehead and/or eyes.
•Keep out of direct sunlight or high ambient temperatures. Avoid interference of heat sources such as microwave ovens, electric
heaters, hot water heaters, high-power lamps, radiators, etc. to avoid damage to the camera or blackbody.
•The visible light channel of the camera requires sufficient illumination with minimal backlighting to properly register faces.
It is recommended to use railings or
other devices to guide personnel in the
correct direction towards the camera for
detection for best accuracy and stability.
Recommended Positioning
Insufficient
illumination
Too much
backlighting
Incorrect direction
of traffic
Avoid these scenarios
Preparation | Survey
•When there is a large difference between indoor
and outdoor temperatures, it is recommended to
route people through a back and forth S shaped
route to allow the temperature of a person’s
forehead to stabilize (reducing impact of
excessive heat from outside or excessive cooling
of the skin)
•It is recommended to keep thermal camera away
from an exterior door where hot or cold air might
rush in when it is opened.
Indice
