Plejd DAL-01 Manuale utente
DAL-01
INSTALLATION MANUAL
0290.2.6
Mains electricity
230 VAC/50 Hz max 0.05 A
Standby power
0.3 W
External operating temperature
-25 to +35 °C
Dimensions
46x46x18 mm
Protection
Overtemperature software
Short circuit protection
DALI bus
Max 64 DALI loads
Guaranteed supply current 128 mA
Maximum supply current 150 mA
Short circuit protection activates after 2 seconds,
recovers after 13 seconds.
Basic insulation
Max cable length 300 m (1.5 mm2)
Radio
2.4 GHz mesh
Bluetooth®
Radio range
Up to 10 m indoors.
The Plejd mesh technology extends the range by
allowing the units to communicate with each other.
RISK OF INJURY TO PERSON OR PROPERTY
All work on the appliance must be
carried out by an authorized electrician.
National laws and regulations
must be followed.
Plejd AB
Krokslätts fabriker 27A
431 37 Mölndal
Sweden
Manufacturer | Plejd AB
Country of manufacture | Sweden
Further information can be found
in the Plejd app or at plejd.com
EN
Compliant to standards
Hereby, Plejd AB declares that the radio
equipment type DAL-01 is in compliance with
Directive 2014/53/EU.
The full text of the EU declaration of conformity
is available at the following internet address:
plejd.com
DAL-01
DA+DA-
N1 2
LL
L
N
Install the product in the appliance box behind the
push button/box lid or secure it with a Mounting clip
(MNT-01, not included) on the wall or DIN rail.
Connect the product according to the wiring diagram.
The module comes with a built-in power supply, so there
is no need to use a dedicated DALI power supply for the
DALI bus.
Connect the product
Control inputs 1 and 2 can be used for control using:
- Push button (preset)
- Light switch
- Motion sensor (with neutral conductor)
The inputs can also be used to wirelessly control one
or more products from Plejd. A double click can be used
to activate lighting scenes.
The settings are easy to adjust in the app.
Support
Download the app and follow the instructions
Hand over the Plejd system
Hand over the Plejd system to your customer by writing
the system code on the included sticker . You’ll find the
code in the app once you have completed the installation.
Place the sticker in the distribution box and give the
welcome folder to the customer.
In the event of any technical questions, please contact
Plejd customer service.
HI!
2
1
3
Download the Plejd app via the App Store or Google Play.
After supplying power to the unit by following the relevant
wiring diagram, use the app to complete the installation.
This requires Internet connection and Bluetooth®on your
phone/tablet. You do not need any additional equipment
to get started.
It’s simple to configure all relevant settings in the Plejd app.
The app can be used to schedule the lighting using the
astro/time schedule, control lighting, and wirelessly sync
control switches and scenes.
Control inputs 1 2
Altri manuali Plejd Attrezzatura di illuminazione
