9. INSTLLATION MODE
•Manual SEr 5 option turning on can be done using strong magnet or OptoBTEx head by closing it
to the OPTICAL INTERFACE window. Repeat that step until SEr 5 sign will appear. Installation
process will start when all indicators disappear.
•Installation process startup is marked by blinking antenna symbol
on display. This means that the internal modem is turned on.
•After few seconds the GSM range indicator will flash constantly.
Number of bars determines the GSM range.
•Antenna symbol will be blinking for about minute, then it will flash constantly. Blinking
icon will appear, which means connecting with APN.
•In the next step together with icon the blinking data sending icon will appear.
•In the end, the device will proceed to normal work showing periodically date, hour and registered
parameters value. All of mentioned icons should flash constantly, which determines the correct-
ness of sending data.
10. DEVICE DISPLAY
On display there are presented periodically registered values, date and hour.
During normal device state following indicators can be visible:
•"SEr 7" menu allows for connection with server examination. During this
mode registered data from last billing day is sent. On display the "rEPort"
sign will appear. When finished - the symbol will appear.
•"SEr 6" menu allows for GSM signal range and antenna efficiency exam-
ination. This test lasts for about 1 minute, where on display current CSQ
level is presented. Mostly CSQ ≥ 9 is sufficient.
