Plus P-106A Manuale utente
340-4, DANGSAN-DONG 6KA, YOUNGDEUNGPO-KU, SEOUL, KOREA
TEL : +82-2-2679-4131~8 FAX : +82-2-2679-4114
http://www.plus.co.kr e-mail : plus@plus.co.kr
Copyright ⓒ2007 PLUS All Rights Reserved Printed in KOREA(Ver 1.2)
1. FOREWORD …………………………………………… 4P
2. FEATURES ……………………………………………… 4P
3. SPECIFICATION ………………………………………… 5P
4. APPEARANCE ………………………………………… 6P
5. OPERATION PANEL …………………………………… 8P
6. OPERATION …………………………………………… 11P
7. ERROR CODE ………………………………………… 20P
8. TROUBLESHOOTING ………………………………… 23P
9. SELF CLEANING ……………………………………… 25P
CONTENTS
NOTE : This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at his
own expense.
4 5
Thank you for selecting a Plus Bank Note Counting Machine. This manual has been
compiled to provide complete instructions for operating the machine.
Before starting, please read the instructions thoroughly to familiarize yourself with all of
the machine functions.
1. FOREWORD 3. SPECIFICATIONS
Patented fan built-in dust removal system.
Operator-variable presetting from 1 to 999. Batch setting is programmable
through the 10 digit numeric keypad.
Enhanced self diagnostics.
Stops and sounds alarm for the possible errors (double, short, chain, half….)
Optional Ultra-Violet or dual UV and Magnetic counterfeit Detection.
Optional size check detection & Customer Display.
Dust collector for efficient dust removal.
2. FEATURES Three selectable speeds : 800, 1000, 1200 notes/min (STANDARD)
1000, 1200, 1500 notes/min (OPTION)
280mm(W)×206mm(H)×236mm(D)
Approx. 5.3 kg
50mm×100mm~100mm×181mm, Thickness: 0.06mm~0.12mm
Roller friction type
300sheets(Optional:500sheets)
Free Voltage(AC 86V ~ 264V, 50/60Hz)
200sheets
40W
Counting speed
Dimensions
Weight
Size of countable note
Feed system
Hopper capacity
Stacker capacity
Power source
Power consumption
6 7
4. APPEARANCE FUNCTION
NAME
No
Notes to be counted are placed in the Hopper.
HOPPER
Easily adjust the hopper plates to the different width size of banknotes
Used for carrying the machine.
Used for the proper adjustment of gab between paper feeding
rollers for smooth counting of various notes to have different paper
thickness.
To clear the possible errors (half, chain, double…)
SELF CENTERING
HOPPER PLATES
HANDLE
PAPER THICKNESS
ADJUSTMENT SCREW
Counted notes are stacked in this stacker.
Built-in dust removal system.
Main power on / off switch.
Connector for optional remote display.
User can easily remove the dust to be stacked on this dust collector.
STACKER
FAN
POWER SWITCH
REMOTE DISPLAY PULG
DUST COLLECTOR
89
5. OPERATION PANEL
Turn the power switch ON. The counter will display the following message.
tst
,
good
it is self test function.
FUNCTION
NAME
No
The number of counted notes is displayed here.
Counter numerical display
By pressing any number key, user can freely preset the number
to be counted.
This key is used to clear errors.
Used to stop or to restart the counting temporarily during
counting operation.
Preset key
Clear key
Restart key
3 different counting speeds can be selected by simply pressing
this key. SPD 1 (High speed), SPD 2 (Middle speed), SPD 3 (Low
speed).
Speed key
By pressing this key, the counting will be stopped in case a
counterfeit note is detected through the magnetic features.
Magnetic Detection key
(OPTION)
1110
FUNCTION
NAME
No
By pressing this key, the counting will be stopped in case a
counterfeit note is detected through UV features.
Ultra Violet Detection key
(OPTION)
When pressed, the machine will provide accumulative total of all
counted notes.
Use this key to place proper density level for two-sheet detection.
Proper adjustment of density level can ensure correct counting.
ADD key
Density key
(Double Detection)
The selected batch number is displayed here.
Batch number display
6. OPERATION
1)Switch on the power, located on the back of the unit.
2)Display will default to 100 for the batch, the lower right corner should read “O”
3)Adjust the hopper width
4)If bills are placed on the hopper, the bills will start counting automatically and it will stop
when last bill has cleared the top of the machine.
During counting of the bills, if you press "S" key, counting will be stopped at
this moment and if you press "S" key again, counting will be resumed.
5)You may choose to enable the “SD” or “UV” or “MD” detection features, before counthing
by pressing the appropriate button “SD” or “UV” or “MD” or you may enable all these
functions. (OPTION)
NOTE : See page 8~10 for key descriptions, and functions
To detect the different sizes for both longer(length)and
shorter(width)sides of notes from the target note by size
comparison with accuracy.
SD key (OPTION)
12 13
6)How to Sort bank notes
Precautions to insure proper settings for counting of bank notes
Damp and/or badly damaged notes should be avoided.
Check that no foreign matter (piece of paper, paper clip, dust, etc.)is mixed in the
bundle of notes.
Folded or curled notes should be straightened before they are set on the hopper.
7)How to set test mode
Damp and/or badly
damaged note
Curled note
Stack of notes mixed with a paper clip or
piece of paper
Piece of paper
Folded note
Clip
Test mode start
1514
How to select test mode
Push ①key for 2~3 seconds.
How to select each test mode
When test mode is on standby, set the objective test number on the panel by
pressing key no. ①`~`⑨.
How to finish test mode
Press the ⓒkey.
t S t
t E S t
8)Test mode
CONTENTS
ITEMS
Key No
Motor condition checking.
①
Motor ON/OFF.
②
Indicates sensor condition.
③
Motor is switched ON or OFF every time.
Each sensor name will be
displayed in case the sensor
condition is abnormal status.
LED Display Example for Sensor
condition.
t-2t-2
r u n StoP
,
Motor is operated continuously.
t-1
r u n
tSt
g
o o d
All Sensors are normal.
1716
CONTENTS
ITEMS
Key No
Indicates sensor condition.
③Abnormal status of start & End sensor.
t-3t-3
S t r End
,
Abnormal status of Left & Right sensor.
t-3t-3
L
E F t rHt
,
Abnormal status of encoder sensor.
t-3
E
n c o
CONTENTS
ITEMS
Key No
Indicates total number of
passed notes.
④
Indicates production
date.
⑤
Indicates serial Number.
⑥
r E c rEc
0
001 6002
,
P r o Pro
2
003 0722
,
S E r SE r
0
000 2736
,
⑦Program version
indication
Indicates the Program version.
U E r
u
-1 5
18 19
9)User mode
Push ⑨key for 2~3 seconds to enter into user mode. When user mode is on standby,
set the objective setting number, ①`or`② on the panel.
CONTENTS
ITEMS
Key No
Setting automatic start
on/off
①
Setting buzzer sound
level
②
Adjustable the buzzer sound level in the range
of high, low, mute with pressing this key.
bELbEL
L o on
,
CONTENTS
ITEMS
Key No
Setting buzzer sound
level
②
bEL
o F F
＜Automatic Counting＞＜Manual Counting＞
Str
A
u t o
Str
nnAn
,
Indice
Manuali Contatore di banconote popolari di altre marche
Safescan
Safescan 2660-S Manuale utente
PRO Intellect Technology
PRO Intellect Technology PRO 95U Manuale utente
Dors
Dors 600 Manuale utente
radiotec
radiotec rapidcount S 575 Manuale utente
CUMMINS ALLISON
CUMMINS ALLISON JetScan Manuale utente
PRO Intellect Technology
PRO Intellect Technology 40 NEO Manuale utente
