PLUSH, a division of Fuchs Audio Technology
407 Getty Avenue | Clifton, NJ 07015 | Ph. 973-772-4420 | Fax 973-772-4460 | info@fuchsaudio.com
www.plush-pedals.com www .fuchsaudiotechnology.com
PLUSH “PLUSH DRIVE” PEDAL INSTRUCTIONS
Thank you for purchasing this Plush product. Plush (a division of Fuchs Audio Technology LLC) is a
company committed to the finest quality professional products, built for years of trouble free use.
This pedal incorporates a solid aluminum enclosure, a durable powder coated finish, premium passive
components, metal shaft controls, and is backed by a five year warranty.
A few pointers: If using this product on a pedal board, and using external power, it’s wise to remove the
battery. This unit may be cleaned with a soft dry cloth (like an old T-shirt), but no abrasive cleaners
should be used. If the pedal is extremely dirty a mild cleaner such as Windex may be used, however, it
should be strayed onto the cloth, not the pedal, and care should be taken to not get this cleaner into any
jacks or switches.
The Plush “Plush Drive” pedal is a unique product, designed by Andy Fuchs. It uses a unique circuit
topology which uses a combination of IC’s and selected FET’s, for lowest noise and the warmest tube
like overdrive tones possible.
The unit is activated when a standard ¼” guitar cable is plugged into the input jack. If using this unit on
battery power, the guitar cable should be unplugged when it’s not in use, to extend battery life.
The Plush “Plush Drive” is a simple 4-knob overdrive pedal, which is easily dialed in for the widest range
of overdrive tones. The gain control is set to control the amount of distortion. It can go from a mild blues
style distortion, to a high gain Dumble style medium gain overdrive when set at maximum gain. The
touch control is unique to this product. It sets the amount of touch sensitivity to your fingers and/or
how hard you pluck the guitar. The tone control goes from a dark (full counter clockwise) tone, to a
bright chimey tone as the control is turned up. Finally, the level control sets the final output level of the
pedal. This control is used to set the solo level when the pedal is activated (LED on). The input
