PMT AS7. P055.100 Manuale utente
USB Speaker Mounts
User Guide
www.precisionmounts.com
call us at 1-888-869-7652 | [email protected]
Description Part Number
USB Speaker with Vesa Bracket AS7. P055.100
USB Speaker with Universal Mount AS7. P055.102
AS7. U050.004
AS7. U050.005
Installation Instructions
AS7.U050.004 - USB Speaker with VESA Bracket
This mount allows you to mount the speaker behind a
dock or any device with 75mm VESA mounting pattern.
Step 1:
Detach the docking station (with VESA hole pattern)
from the existing mount (e.g. clamshell etc.)
Step 2:
Sandwich the speaker mount between the dock and
the mount such that the speaker is facing the desired
direction and mounting holes line-up. Secure the dock
back to the mount (e.g. clamshell) using the same
hardware.
Note: The metal plate can also be bent along the slots
for better orientation of the speaker.
Step 3: Plug the USB port of the speaker into the dock
or laptop. Secure the wire to any metal surface using a
cable tie.
AS7.U050.005 - USB Speaker with Universal Mount
This mount allows you to mount the speaker to any flat
surface (e.g. console side, console faceplate etc.).
Step 1:
Lay the speaker on a flat surface at desired location.
Make sure the USB port of the speaker can be plugged
into the dock or laptop from the desired location. Using
the mount as template, drill two #6 clearance holes.
Step 2:
Using the #6-32 hardware provided, mount the speaker
to the surface. Plug the USB port of the speaker into
the dock or laptop. Secure the wire to any metal
surface using a cable tie.
Questo manuale è adatto per i seguenti modelli
3
Indice
Altri manuali PMT Rack e supporto
