PNI DK220 Manuale utente
PNI DK220
Access control keypad/Клавиатура за контрол на достъпа/
Zugangskontrolltastatur/Teclado de control de acceso
Clavier de contrôle d’accès/Beléptető billentyűzet
Tastiera controllo accessi/Toegangscontrole toetsenbord
Klawiatura kontroli dostępu/Tastatura control acces
EN User manual ............................. 3
BG Ръководство за употреба ............... 25
DE Benutzerhandbuch ....................... 50
ES Manual de usuario ........................ 74
FR Manuel utilisateur ........................ 98
HU Használati utasítás ....................... 122
IT Manuale utente ......................... 146
NL Handleiding ............................ 170
PL Instrukcja obsługi ........................ 194
RO Manual de utilizare ....................... 218
3 - User manual
Description
PNI DK220 is a stand-alone access control device and proximity
reader. It is equipped with two relays for two-door control and
supports a maximum of 2000 users, each user can have a PIN code
and an access card.
The keypad can be connected to an electromagnetic key, an alarm
system, a doorbell, an access button or a door sensor.
The device has 7 operating modes: Wiegand card reader, access
control for one door, access control for two doors, access control
with external card reader for two doors, two interconnected units for
two doors, anti-passback for one door and two-door anti-passback.
Main features
• Aluminum alloy housing with IP65 water resistance class
• Built-in 125KHz card reader
• Illuminated numeric keys. The key light can be programmed as
follows: Normal ON, Normal OFF or Human-Approach ON
(lights up when it detects motion).
• Tamper alarm, door sensor trigger alarm, duress code alarm This
code can be used when the user is forced to threaten to open the
door. When typing this code, the door will open but will activate a
silent alarm ).
• Add and delete cards with the administrator card.
• Register and delete users by keys.
4 - User manual
Technical specifications
Supply voltage 12V AC/DC
Standby consumption <25mA
Electric lock output load <1A
Alarm output load <1A
Doorbell output load <1A
Card reading distance maximum 40 mm
User capacity maximum 2000
Compatible cards EM 125Khz/HID 125KHz
Card transmission format 26-37 bit Wiegand
Keypad transmission format 4 bit and 8 bit and virtual card
number
Working temperature -26°C ~ +80°C
Installation
Choose the installation location and make holes in the wall that
match the holes in the mounting bracket. Secure the wall bracket
with the screws included in the package. Pass the cables through the
slot in the middle of the holder. Connect the cables. Insulate unused
cables to avoid short circuit.
5 - User manual
Wiring
Zone 1
BELL_A Pink Doorbell button
BELL_B Pink Doorbell button
ALARM+ Red Alarm connector
AC2 Black AC input
OPEN2 Yellow Access button
D_IN2 Brown Door contact
ALARM2- Gray Alarm 2
NO2 Blue Relay 2 NO
COM2 Purple Relay 2 COM
NC2 Orange Relay 2 NC
6 - User manual
Zone 2
D0 Green Wiegand ouput D0
D1 White Wiegand ouput D1
AC1 Red AC1 (+ 12V)
GND Black GND
OPEN1(LED) Yellow Access button (for green LED)
D_IN1(BZ) Brown Door contact (for buzzer)
ALARM1- Gray Alarm 1
NO1 Blue Relay 1 NO
COM1 Purple Relay 1 Com
NC1 Orange Relay 1 NC
7 - User manual
Audible and luminous warnings
Status LED Buzzer
Standby Red blinks
Press key Di
Read card Green Di.
Door 1 open Green Di.
Door 2 open Green blinks Di.
Successful operation Green Di.
Operation failed DiDiDi
PIN input Red
Read card & PIN Red
Multiple card reading Red
Under menu Red
Under settings Orange
Administrator card enter Orange DiDi
Administrator card exit Red blinks Di.
Alarm Red blinks
quickly Alarm
8 - User manual
Quick Programming Guide
1. Administrator settings
* Master code #
00
Input the new
Master code #
Repeat the new
Master code #
Change Master code.
Note: The default
master code is 999999.
The master code must
have between 6 and 8
digits.
01 Read the card
Master card
registration for
adding cards.
Note: Default: zone 1.
02 Read the card
Master card
registration for
deleting cards.
Note: Default: zone 1
03 Read the card “Duress” alarm card
registration for zone 1
04 Read the card “Duress” alarm card
registration for zone 2
9 - User manual
* Master code #
05 Input the 8-digit
PIN
Input the “duress”
PIN code for zone1
Note: The first digit
of the PIN must be
1 for zone 1.
06 Input the 8-digit
PIN
Input the “duress”
PIN code for zone2
Note: The first digit
of the PIN must be
2 for zone 2.
07 0000 # Delete all users
51 Master open Lock 1
52 Master open Lock 2
Note:
The “duress” PIN and the “duress” card can be used when the user is
forced to open the door. When typing this code or reading this card,
the door will open but at the same time it will send an alarm signal.
10 - User manual
2. User settings for Zone 1 and Zone 2
Add user card
* Master code #
11
(for Zone 1)
21
(for Zone 2)
Read the card
Input ID # Read the card
Input card number #
Input ID # Input card number #
Note: Users can be added one after the other without leaving
programming mode. User ID can contain between 1 and 4 digits, in
the range 1 - 2000. 1, 01, 001 and 0001 all means 1.
Add user PIN
* Master code #
11
(for Zone 1)
21
(for Zone 2)
Input ID # Input PIN #
Note: The PIN can have 4 to 6 digits. The first digit must be 1 for
Zone 1 and 2 for Zone 2. “1234” is reserved, cannot be set as PIN.
Indice
Lingue:
Altri manuali PNI Tastiera
