PNJ DR-EAGLE WIFI Manuale utente
Share your vision
Thank you for choosing a PNJ product. This manual describes how to prepare and use your product. It’s also
providing information about the utilization and safety precautions, the regulations, compliance and technical
specications of the device. Please read completely, carefully and regularly before use, become familiar
with all the feature of the device and ensure safety use of your drone to enjoy fully with it. Keep this manual
for future use. The manual is also available on our website www.pnj.fr under the heading «User manuals».
USER MANUAL
www.pnj.FR
DR-eagle wifi
-1-
TABLE of Contents
Li-po battery
- By owning, charging or using the LiPo battery, you assume all risks associated with the use of lithium batteries.
- Always keep out of reach of children.
- Never leave the battery unattended while charging.
- Never leave the battery charged for more than 1 hour.
- Use only the USB charger provided in the pack. Never use a Ni-Cd or Ni-Mh charger.
- Before charging the battery, check that it is not damaged. Check that the battery has not swollen or that the battery
compartment is not punctured. If you notice any of these situations: DO NOT CHARGE THE BATTERY!
- A used battery must be removed from the unit and replaced.
- If you notice that the battery starts to swell during charging, disconnect the battery immediately and do not use it again.
Continued use of an inated or deteriorated battery may cause an explosion.
- Make sure that the output voltage of the charger matches the battery voltage. Do not charge at a higher current than
Table of Contents .......................................................................................................................................1
ATTENTION / WARNING / WAARCHUWING .....................................................................................................2
Flight environment......................................................................................................................................3
Drone parts................................................................................................................................................4
Radiocontroller 2.4 GHz...............................................................................................................................4
Install and charge the battery .......................................................................................................................5
Warning ....................................................................................................................................................6
Propellers and propellers guardes.................................................................................................................6
Start To Fly................................................................................................................................................7
Automatic take off and landing .....................................................................................................................8
Manual Take off..........................................................................................................................................8
Emergency stop and vertical crash ................................................................................................................8
Return button.............................................................................................................................................9
Headless mode ..........................................................................................................................................9
Speed selector ......................................................................................................................................... 10
360˚ Flip ................................................................................................................................................. 10
Gyroscope and joystick calibration .............................................................................................................. 10
How to use joysticks ................................................................................................................................. 11
Flight adjusments..................................................................................................................................... 12
Photo & Vidéo.......................................................................................................................................... 13
Import photos & Vidéos ............................................................................................................................. 13
App - Control interface ............................................................................................................................. 14
App - How to use joysticks......................................................................................................................... 15
App - Flight adjustment ............................................................................................................................. 16
Gyroscopic Control ................................................................................................................................... 17
Maintenance............................................................................................................................................ 17
Warranty ................................................................................................................................................. 18
Recycling ................................................................................................................................................ 19
Declaration of conformity .......................................................................................................................... 19
Notebook ................................................................................................................................................ 20
Notebook ................................................................................................................................................ 21
Notebook ................................................................................................................................................ 22
-2-
Precautions for use
When using your drone, be sure to observe the following precautions:
- Suitable indoor and outdoor use in very windstill conditions.
- Not suitable for persons under 14 years of age.
- Minors must pilot under the supervision of an adult.
- Caution: risk of ingestion of small parts.
- Never use the appliance near children or pets.
- Be sure to use this product in a safe and responsible manner to avoid personal injury and / or property damage.
- Make sure that your use is in accordance with the legal provisions of the country where you are located.
- Find out about restrictions on the use of Wi-Fi frequencies in your ight location.
- check the weather conditions before use.
- Do not y in rain, fog, wind or snow.
FR
EN
NL
ATTENTION / WARNING / WAARCHUWING
Veuillez lire le “Mode d’Emploi” entièrement et attentivement avant toute utilisation
Le manuel mis à jour est disponible sur notre site: www.pnj.fr/modes-demploi/
ATTENTION: Toutes les précautions d’utilisation concernant les batteries Li-Po doivent être suivies rigoureuse-
ment. Une mauvaise manipulation de la batterie peut provoquer un incendie, une explosion, des blessures
personnelles ou des dégâts matériels.
Please read the operation manual carefully before using the product
The english User Manual can be downloaded on our website: www.pnj.fr/en/user-manuals/
WARNING : LiPo batteries are dangerous, please follow the instructions to avoid injuries or damages.
Lees de instructies in de bedieningshandleiding zorgvuldig door voordat u onze producten gebruikt
De bedieningshandeleiding kunt u downloaden vanaf onze website: www.pnj.fr/en/user-manuals/
WAARSCHUWING : LiPo baterijen zijn gevarlijk, het niet opvolgen van de gebruikshandekeiding kan verwondingen
en schaden veroorzaken.
recommended. Use only the charger provided in the pack.
- Disconnect the battery from the charger if it becomes too hot (Never exceed 49 ° C / 120 ° F) or swells. If the battery
becomes hot, disconnect the charger immediately.
- Charge only on non-ammable surfaces. Never charge inside a vehicle!
- Do not expose the battery to any source of heat or high temperature.
- Never put the battery in contact with water or immerse it in any other liquid.
- Improper use of the battery may cause re, explosion or other hazards.
- In case of re caused by the battery, do not use water to extinguish the re (sand is recommended).
- Do not carry unwrapped batteries in your pocket or bag, as the shock of the batteries against each other could cause a
short circuit.
- Store the battery in a dry place at room temperature.
ATTENTION ATTENTION ATTENTION ATTENTION ATTENTION ATTENTION
Only use a compatible
LiPo Charger
Always charge away from
ammable materials
Don’t charge without
supervision
Do not try to modify the
batteries Never use a hot battery
Don’t charge damaged
batteries
-3-
Warning
The law requires you to use this drone in a sensible and responsible manner to avoid human or material damage. In the
case of unauthorized use or for unlawful purposes, you will be held fully responsible for any damage caused. Be sure
to respect the law, without infringing the privacy of others. PNJ assumes no liability for damage resulting directly or
indirectly from the use of the product, any part of this product or this manual. PNJ cannot be held responsible for any
accident, injury, death, loss or other claim of any nature whatsoever related to or resulting from the use of this product.
All users must comply with the regulations of international organizations such as the International Civil Aviation Organi-
zation (ICAO) and the regulations of their own national airspace. To learn more about the rules in force in your country,
visit the following sites:
ICAO - www.icao.int
PNJ - www.pnj.fr
Flight environment
1. Flying outdoors (recommended): The DR-Eagle Wifi is ideal for outdoor flying and large spaces. Pilot at
medium temperature, in sunny weather or without wind.
2. Flying indoors (not recommended): The DR-Eagle Wifi is difficult to navigate in tight spaces.
Remarks :
-Do not use in case of extreme temperatures, be viligant as this could damage or alterthe flight performance of the
drone.
-Do not fly in windy weather, flight performance and control of the device may be altered because of the wind. It could
also take away or damage the drone.
Download the app
- Avoid contact with sand, dust, water, liquid substances or heat, it could cause irreversible damage.
- Keep away from obstacles, people, animals, dwellings, vehicles, high voltage cables or trees.
- Keep clear of the propellers. They can cause material or physical damage.
- Not suitable for people with epilepsy.
- Avoid excessive ying (risk of eyestrain or physical fatigue).
- Observe the safety instructions in this manual.
- Use only the accessories supplied by the manufacturer.
- Before each ight, check that the batteries are fully charged.
Please search "PNJ VISION" on the Google Play Store or
Apple App Store to download the mobile application to
control or set up the drone, enjoy real-time video
feedback and access your gallery.
Included in the pack
PNJ VISION
1x Drone DR-Eagle Wi
1x 2.4 GHz remote control
4x Extra propellers
4x Landing gear
4x propeller guards
2x 3.7V 380mAh Li-Po batteries
4x 1.5V AA batteries
1x USB charger
1x PNJ CVR360
1x Smartphone holder
1x Screwdriver
1x DR-Eagle Wi user manual
1x CVR360 user manual
-4-
Frequency : 2416 MHz - 2457 MHz
Maximum power : -1.5dbm
Drone parts
Radiocontroller 2.4 GHz
* The functions in red above make it possible to rebalance the drone
by adjusting the power delivered by each of the motors (Page 12).
Emergency stop: Hold the button on the upper right of the remote
control to stop the motors immediately.
4x Landing gear
4x Spare propellers
4x Propeller protections
1x USB charger
1x Screwdriver
Camera
Propellers
Propeller
protections
Elevation / Rotation Joystick
CF mode (short press)
Speed selection
Motion joystick
Photo (short press)
Video (long press)
Flip 360˚
Emergency stop (long pressure)
Trim / Forward / Backward Motion Correction
Trim / Correction left / right movement
Fire control (LED)
Return button
Automatic landing
Automatic takeoff
-5-
How to remove or install the battery:
1. Remove: To remove the battery from the drone, first unscrew the screw on the battery compartment. Then unlock the
compartment by sliding it towards the rear of the drone then carefully unplug the battery connector (Figure 2).
2. Install: The battery installs in one direction only. Please replace the battery in its compartment without bending or
crushing the cables and then connect the battery connector (female) to the connector of the drone (male). To securely
close the battery compartment, please first slide it and then replace the security screw with the screwdriver included in
the pack.
How to charge the battery:
1. Connect the charging cable to the battery connector (Figure 2).
2. Insert the USB cable into your computer (Figure 4). The indicator light (red LED) will light until the battery is fully
charged
install and charge the battery
Figure 1: Installing the support Figure 2: Installing the smartphone
How to install / remove smartphone support:
The expandable radio remote control bracket adjusts to different smartphone sizes (Figure 2). To safely install or
remove the radio control holder, please refer to the diagrams below.
1. Install the stand: Insert the stand on the top of the remote control (in stop).
2. Install the smartphone: Gently pull on the extensible bracket mount and insert your smartphone (Figure 2).
3. Remove the stand: After removing your smartphone from the stand, firmly hold the stand of the smartphone, and then
remove it.
Note: Check that your smartphone is correctly installed and that it does not move to avoid any risk of breakage.
Extensible attachment
WARNING !
Do not leave batteries
charged unattended.
(2)
(4)
(1)
(3)
Computer
Powerbank
Wall charger
-6-
1. Make sure that the voltage of the USB charger ts the local electricity supply.
2. The charging plug will overheat if overcharged. In this case unplug the battery immediatly to avoid accident.
3. Do not charge the battery unattended.
4. Do not use others charger other than the one supplied with the drone.
5. Wait 30 minutes after the y in other to let the battery cool down before recharging it.
6. Do not leave the battery in the re, sunlight or in environment too hot.
7. Do not short circuit the battery.
8. Keep the battery away from metal parts or magnets.
Warning
Propellers and propellers guardes
The propellers of the drone are provided with marks A and B and are diagonally
opposite. Each propeller fits on the rotor in one direction.
1. Clockwise rotating propeller (A on the diagram) on the left front engine and the right rear engine.
2. Anti-clockwise rotation propeller (B in the diagram) on the right front engine and the left rear engine.
3. To replace a propeller first remove the protective cover and unscrew the screw on the top of the rotor.
4. Pull the damaged propeller up to remove it from the rotor
5. Replace the damaged propeller with a new propeller of the same type (A or B).
6. New propellers must be fully depressed. Then replace the protective cover and tighten again.
Note:
Any maintenance or repair work on the drone must be done with the battery disconnected. Broken or damaged
propellers must be replaced by new propellers, to ensure optimal operation, always use original propellers. To ensure
your safety and that of those around you, always drive with the propeller protections.
Figure 1: Protective cover Figure 2: Protective screws
BA
B A
-7-
Start To Fly
1. Initialization (radio control off): Place the drone on a flat surface and pull the On / Off button, the light indicators of the
drone will flash indicating search pairing.
2. Pairing: Press the ON / OFF button to turn on the remote control. It will beep (beep beep) indicating the frequency
search, the radio control indicator light will begin to flash. Aim the joystick left down (beep) and then up (beep) to connect
the drone to the remote control (Figure 1).
3. Indicator: Once the connection is established the lights of the drone and the remote control will stop flashing.
4. Ignition: To start the engines of the drone, please simultaneously orient the two joysticks diagonally inwards (Figure 2).
The engines come on and the propellers start to turn slowly, the drone is ready to take off.
5. Takeoff: To take off the drone manually, gently move the joystick left up (Figure 3). You can also use the autostart /
landing button, the drone will rise to an altitude of 2m.
6. Landing: To land hold the left joystick down until the drone lands on the ground (Figure 4). You can also use the
autostart / landing button, the drone will land regardless of its altitude.
7. Photo / Video: To take a photo press the right joystick (short press). To start / stop a video recording, press and hold the
right joystick (Figure 5).
8. Emergency stop: In case of crash, collision or loss of control of the drone please use the emergency function.
9. Manual Engine Shutdown: When the drone is on a level surface and the engines are unlocked (started), you can stop the
engines by simultaneously pointing the left joystick on the lower right and the right joystick on the lower left.
10. Battery: When the lights on the drone start flashing quickly: land and charge the battery.
Note: Please always keep your drone on view. In case of low battery level or loss of signals with the radio control, the
drone will land automatically. PNJ does not guarantee the loss of your drone.
Emergency stop
button (long press)
Photo (short press)
Video (long press)
Figure 2: Ignition
Figure 5: Ignition
Figure 3: Take off
Figure 4: Landing Figure 6: Emergency stop
Figure 1: Pairing
-8-
Figure 1: Engine ignition
2m
2m
The drone rises 2m regardless
of its starting altitude.
Take off
Landing
Automatic take off and landing
1. Take-off: After the automatic take-off / landing button has been pressed for a long time, the drone rises and
stabilizes at an altitude of 2m above its starting position.
2. Landing: After the automatic take-off / landing button has been pressed for a long time, the drone will automatically
descend to the vertical position until it lands on the ground.
After turning on the engines (Figure 1) you can manually lift the drone by holding the left joystick up (Figure 2).
Warning:
1. Always place the drone on a flat surface before pressing the autostart button.
2. You can still maneuver the drone during the take-off and auto landing phases.
3. Too fast acceleration can cause air depression around the sensor and cause altitude losses.
Figure 2: Manual take off
Emergency stop
button (long press)
Bouton Arrêt d’urgence
(longue pression)
Figure 1: Emergency stop Figure 3: Resume flightFigure 2: Vertical crash
!
Warning
!
Emergency stop and vertical crash
1. Emergency stop: In case of crash, collision or loss of control of the drone please use the emergency stop function.
Hold the button on the upper right of the remote control to stop the motors immediately.
2. Vertical Crash: If the drone crashes to the upright position and turns around, it will automatically shut down its
engines for safety to protect the rotors and your environment from damage (Figure 2).
3. Resume flight: After using the emergency stop function or having crashed into a vertical position, please check the
condition of the drone and then place it on a flat surface. To take off again, simply press the automatic take-off / landing
button or simultaneously hold the two joysticks down and inside to unlock the engines. (Figure 3).
Manual Take off
-9-
REturn button
Return activated
Return button
(joystick pressure)
(3)
(1) Initialization of the drone (2) Activation of the Return
(long press)
How the Return Button Works:
During its initialization, the drone detects its orientation and memorizes it (North for example). By pressing
the return button the drone will automatically move in the opposite direction to the one memorized (so South).
The DR-Eagle Wifi is not equipped with a GPS function, so it is necessary to regain control in order to land it at
the desired location. The drone is always controllable during the return phase.
The drone detects its starting
orientation and memorizes it
(North).
Long press the Return button
to activate the function.
The drone automatically returns
in the opposite direction (South).
!
HEADLESS MODE
Activation: At the time of the command the drone saves its orientation and memorizes it (Figure 2: North).Long press
the "CF Mode" button (Figure 2) to activate the direction / orientation lock (Figure 2: North). The radio control will beep
(beep) and the 4 LEDs of the drone flash simultaneously when you activate the CF Mode function.
Explanation: This mode allows you to control the drone without worrying about its direction of flight. If you point the
right joystick forward the drone will go north regardless of its orientation (North / South / East / West) flying at the time
of command (Figure 3). When the CF mode is off, you must always worry about the flight direction / orientation of the
drone (Figure 1). CF mode is ideal for learning to fly.
Warning : If a collision occurs it is possible that the CF mode is no longer functioning properly. In this case, set the
drone immediately and reset the gyroscope and the trimmers (see page 10).
CF mode on(1) CF mode off CF mode activation
(long pressure)
(2) (3)
Mode CF
(pression du joystick)
Indice
Altri manuali PNJ Drone
