// 7
ENGLISH / Connection and operation
1 Connect the two speakers with the included speaker cable, then plug in the power adaptor.
Note! The connecting cable consists of a round and a square cable.
Make sure that the square cable is connected to the black binding post and the
round cable is connected to the red binding post on both speakers.
2 After connecting the speakers and the power adaptor, turn the volume knob to the right to turn the
speakers on.
3 Turn the volume knob to the right to increase the volume and to the left to decrease the volume.
To turn the power off, the volume knob must be turned all the way to the left.
4 The MicroPod Bluetooth have two input options; AUX IN and Bluetooth connection.
You can not use both inputs at the same time. If the MicroPod Bluetooth gets a signal from both
lines, the signal will be mixed. We therefore recommend that only one line input is used.
5 When you turn the MicroPod Bluetooth on, the Bluetooth function will automatically search for
devices to connect to. The Bluetooth is always searching when it is not connected via Bluetooth.
To match the MicroPod Bluetooth and your device, you need to switch the Bluetooth on, on your
device. You will then see MicroPod Bluetooth.
Note! On some devices you will be asked for a password to connect. The password is 0000
6 When a device is connected via the Bluetooth connection you can not connect other devices.
If you want to connect a new device to your MicroPod Bluetooth, you need to disconnect the
Bluetooth on the connected device first.
7 Some devices will automatically reconnect to your device when it is turned on again after it has
been turned off. If you have more devices searching when you turn on your MicroPod Bluetooth it
will choose one of the devices randomly.
ENGLISH / Running-in period
We recommend a running-in period of your new MicroPod Bluetooth speakers of approximately 15-20 hours at normal listening level before you decide
on the final positioning and settings of the speakers. During the running-in period, the drive units will settle in and perform as intended.
ENGLISH
