Poki Cam SDV-G857-VP Manuale utente
User’s Manual SDV-G857-VP
2
Contents
Precautions .............................................................
3
Product Overview……………………………………..
4
Preparing for Use…………......................................
5
Charging the Battery……………...................
5
Installing the Memory Card………………….
5
Mounting the Camera…………………………..........
6
Cleaning Instructions…………………………
6
Using the Camera……………………………………..
7
Taking Pictures………………………………...
7
Recording Videos……………………………..
8
Connections…………………………………………...
9
Remote Control Connection…………………
9
Computer Connection………………………..
11
Smartphone Connection …………………….
12
“Poki Cam” APP Features…………………………..
13
Product Specifications………………………………
14
3
Precautions
Thank you for purchasing this camera. Please read these operating
instructions carefully in order to use the camera correctly. Then store it
in a safe place for future reference
Before using the camera, please ensure that you read and understand
the safety precautions described below.
Do not try to open the case of the camera or attempt to modify this
camera in any way. Maintenance and repair should be carried out
only by authorized service providers.
Keep the camera away from water and other liquids. Do not use
the camera with wet hands. Never use the camera in the rain or
snow. Moisture creates the danger of electric shock.
Use only the recommended power accessories. Use of power
sources not expressly recommended for this equipment may lead
to overheating, distortion of the equipment, fire, electrical shock or
other hazards.
4
Product Overview
1. Shutter Button
6. Tripod Mount
2. Power Button
7. Cover/Capping
3. Lens
8. USB Port
4. Charging/Working Indicator Light
9. Reset
5. Wi-Fi Button
10. microSD Card Slot
5
Preparing for Use
Charging the Battery
Connect the camera to a computer through the provided USB cable.
Red charging indicator will light up.
Once camera is fully charged, the indicator light will turn off.
NOTE: Camera will automatically power on when it’s charging. You
may manually power it off by pressing power button for 3 seconds.
Installing the Memory Card
A microSD card memory card is required for operation; microSD card
not supplied. Twist open the cover from the bottom of the camera with
a coin and then insert a memory card in the microSD slot.
6
Suction Pad Magnetic Mount
Mounting the Camera
Reversible suction pad and magnetic mount allows you to attach the
camera onto many different materials and surfaces. Such as wood,
glass, wall, plastic and metal surfaces. Remove camera from surfaces
by lifting the camera from bottom up.
Cleaning Instructions
To clean and reuse, rinse the suction pad part with water when it is
not sticky enough. Air-dry completely before mounting.
WARNING: DO NOT WET CAMERA BODY. DO NOT IMMERSE IN
WATER.
7
Using the Camera
Power On: Press and hold the power button. The power light will flash
and then remains stable light.
Power Off: Press and hold the power button
NOTE:
1. When the camera is idle for 3 minutes, it will turn off
automatically.
2. During operation if the camera turns off automatically
after the working indicator light continuously flashes for 1
minute, it indicates the power of battery is insufficient.
Please charge the camera when battery is low.
Taking Pictures
1. Turn on the camera
2. Press the shutter button once to take a picture; the
working indicator light will flash once and you will hear a
sound once image is captured.
8
Recording Videos
There are two different Video recording modes:
1. Camcorder mode
2. Vehicle Mode (Dash cam)
Camcorder Mode
Vehicle mode
1. Turn on Camera
2. Press and hold shutter button
for 3 seconds and then
release to hear a beep sound
and see the working indicator
light start flashing to
start/enable video recording
3. Press the shutter button once
to stop recording
1. Connect camera to a
cigarette lighter USB port (not
supplied). The camera will
turn on automatically
2. The camera will record 3-
minute interval files
continuously
3. The camera will turn off
automatically once vehicle is
turned off
Loop recording: OFF; disabled in
camcorder mode
Loop recording: ON; enabled in
vehicle mode
9
Connections
Remote Control Connection
Remote control is connected automatically once camera is powered
on.
NOTE: The remote is disabled if camera’s Wi-Fi® feature is enabled.
Turn off Wi-Fi® mode on camera to use Remote control.
Capture/Recording button
Still Image Capture: Press the button once to take a photo. The
working indicator light will flash once.
Video Recording: Press and hold the button for 3 seconds until you
hear and see the working indicator light start flashing to enable video
recording. To stop recording, press and hold the button for 3 seconds
again. Working indicator light will stop flashing and will turn off.
Capture/Recording Button
Video Protected Button
10
Video Protected Button
Protect your files in case of an emergency or save your files from
being looped-over. Protected files will be saved in a separate
“EVENT” folder inside the memory card for easy access.
Loop recording: Lock and protect the video files from being deleted
or looped-over if your memory card is full. Camera’s loop recording
feature automatically replaced the oldest files by over-writing the file
Press the Video Protected Button to prevent file over-writing.
Camera
mode
Press Video Protected
button to…
In standby mode
Start a 3-minute video recording under
protection.
In recording mode
Start recording a new 3-minute video
In vehicle mode
Lock and protect current video
recording
Indice
