Polaroid ID-3000 Manuale utente
ID-3000
Digital Security and
Identification System
Version 2.4
Operating instructions
Film output configuration
©Copyright Polaroid Corporation 1990, 1991, 1992., 1993
©All rights reserved.
©Polaroid Corporation Cambridge, MA 02139
9/23/93
Polaroid ID-3000
Digital Security and Identification System
Version 2.4
Film Output Configuration
Operating Instructions
Polaroid Corporation
Cambridge, Massachusetts 02139
© Copyright Polaroid Corporation 1990, 1991, 1992, 1993. All rights reserved.
Contents
Introduction 1
Purpose of These Instructions 1
Other Instructions Required 1
Conventions in This Manual 2
Obtaining Assistance 2
FCC Notice 2
ID-3000 Description 3
System Components 4
Typical System Setup 9
ID Card Types 9
General Operating Information 11
Typical Menu Layout 11
Making Menu Selections 11
Returning to Previous Menus 12
Help Screens 12
Startup and Shutdown 13
Starting the System 13
Logging In 15
Logging Out 16
Turning Off the System 18
Draft
Polaroid ID-3000
Digital Security and Identification System
Version 2.4
Film Output Configuration
Operating Instructions
CONTENTS PAGE i
Card Issue and Verification 21
Issue and Verification Overview 21
Reaching the Issue and Verify Menu 22
Making a New ID Card 25
Capturing Images Only 47
Entering Applicant Data Only 63
Verifying Data and Images 68
Reissuing an ID Card 72
Searching a Database 87
Access to the Database Search Feature 87
Searching a Single Field 88
Searching Multiple Fields 89
Using Wildcards 89
Specifying a Search Range 89
Sorting Displayed Records 91
Choosing Displayed Fields 92
Saving and Reusing Search Templates 94
Displaying a complete record 97
Film Output Unit Adjustments 99
Changing ID Card Tint 100
Lightening or Darkening the Card 102
Changing Portrait Tint 104
Lightening or Darkening the Portrait 107
Adjusting the Film Timers 109
Portrait Camera Adjustments 113
Selecting the Image Type 114
Selecting Resolution 116
Adjusting Portrait Contrast 117
Adjusting Portrait Brightness 118
Signature Scanner Adjustment 121
Draft
OPERATING INSTRUCTIONS ID-3000 WORKSTATION VER 2.4
PAGE ii CONTENTS
Portrait Scanner Adjustment 125
Calibrating the Scanner 125
Replacing the Portrait Scanner Fuse 127
Adjusting the Portrait Capture Area 128
Restoring the Factory-Set Capture Area 132
Changing the Film Type Setting 135
Maintenance and Troubleshooting 137
Loading the Film 137
No White Tab 139
No Yellow Tab 140
Cleaning the Developer Rollers 141
Picture Faults and Causes 142
Diagnosing Scanner Problems 144
Remote Portrait-Taking Tips 147
Glossary of Terms 151
Index 153
Draft
ID-3000 WORKSTATION VER 2.4 OPERATING INSTRUCTIONS
CONTENTS PAGE iii
Introduction
Purpose of These Instructions
These instructions are intended for use by operators of
the Polaroid ID-3000 Digital Security and Identification
System equipped with a film output unit and ID-3000
software version 2.4. These instructions also apply to
systems with the optional color portrait scanner, which
captures portraits from color photographs. In addition,
these instructions can be used with ID-3000 systems
equipped with the optional access control interface.
For purposes of these instructions, operators are de-
fined as personnel who use the ID-3000 for issuing ID
cards, verifying identities, searching databases and per-
forming the routine maintenance and adjustments neces-
sary in performing those tasks.
Other Instructions Required
Security supervisors and managers should refer to
Polar-
oid ID-1000, ID-2000 and ID-3000 System Management
Instructions
for such supervisory functions as assigning
passwords and usernames, creating reports and manag-
ing databases and files. The system management in-
structions also list additional references and instructions
necessary for supervisory and management activities.
Draft
Polaroid ID-3000
Digital Security and Identification System
Version 2.3
Film Output Configuration
Operating Instructions
INTRODUCTION PAGE 1
Conventions in This Manual
For clarity of presentation, the following conventions are
used in these instructions:
Bold type indicates text characters to be typed
on the keyboard and special keys to be pressed:
Type rto select the report menu.
Press the F2 key to display more informa-
tion.
Computer-screen type indicates messages or
menu items appearing on the screen.
The message Please Wait may appear on
the screen.
Note also that this manual sometimes refers to the
ID-3000 system as simply the "ID-3000."
Obtaining Assistance
For technical assistance, call Polaroid toll-free from
within the U.S.A., Monday-Friday, 8 AM to 8 PM Eastern
Time: 1-800-432-5355
Or write to: Polaroid Resource Center
784 Memorial Dr. 3M
Cambridge, MA 02139.
FCC Notice
Warning: This equipment generates, uses, and can radi-
ate radio frequency energy and if not properly installed
and used in accordance with these instructions, may
cause interference to radio communications. It has been
tested and found to comply with the limits for a Class A
computing device pursuant to Subpart J of Part 15 of
FCC Rules, which are designed to provide reasonable
protection against such interference when operated in a
commercial environment.
Operation of this equipment in a residential area is likely
to cause interference in which case the user at his own
expense will be required to take whatever measures
may be required to correct the interference.
Draft
OPERATING INSTRUCTIONS ID-3000 WORKSTATION VER 2.4
PAGE 2 INTRODUCTION
ID-3000 Description
The Polaroid ID-3000 Digital Security and Identification
System is a computerized workstation for producing
highly secure photo- identification cards andfor electroni-
cally storing text data, portraits and other identification
images for each applicant. The system includes all
equipment for capturing portraits and other images and
entering applicant text data.
Electronic storage of applicant information allows rapid
retrieval for updating, reissuing and verifying. It also al-
lows data stored on other, non-ID-3000 systems to be
imported and reused without recapturing images or re-
typing data.
Multiple identification-card formats can be stored in the
system, and each applicant’s appropriate format can be
selected automatically or manually at the time of issue.
The ID-3000 system can be linked to other computers in
a network system, or it can be operated as a completely
self-contained, stand-alone unit. In either configuration,
a system of passwords and usernames prevents un-
authorized use and provides a detailed record of all ac-
tivities.
Draft
SYSFILM.EPS
ID-3000 WORKSTATION VER 2.4 OPERATING INSTRUCTIONS
DESCRIPTION PAGE 3
System Components
The ID-3000 system consists of the following compo-
nents: A. Live portrait camera
B. Display
C. Computer
D. Portrait scanner (optional)
E. Keyboard
F. Laminator
G. Diecutter
H. Film output unit
Because ID-3000 systems are specially configured to
meet customer requirements, your system may not have
all the components shown. It may also have additional
components.
Draft
ABCD
E
G
H F
SYSFILMC.EPS
OPERATING INSTRUCTIONS ID-3000 WORKSTATION VER 2.4
PAGE 4 DESCRIPTION
Live portrait camera
The ID-3000 live portrait camera captures the appli-
cant’s color portrait for use on the ID card and for elec-
tronic storage. It includes an electronic flash for
consistent, high-quality portraits.
Display
The ID-3000 display presents the operator with menus,
prompts and applicant data for guidance through the
card issue and verification operations. It also displays
the applicant’s portrait (as captured by the portrait cam-
era or as stored in the system) and any other identifica-
tion images captured or stored by the system.
Draft
11UPPER.EPS
DISPLAY.EPS
ID-3000 WORKSTATION VER 2.4 OPERATING INSTRUCTIONS
DESCRIPTION PAGE 5
Altri manuali per ID-3000
1
Indice
Altri manuali Polaroid Sistema di sicurezza
Manuali Sistema di sicurezza popolari di altre marche
EDM
EDM Solution 6+6 Wireless-AE Manuale utente
Highway Safety Group
Highway Safety Group EA401 Manuale utente
Siren
Siren LED GSM Manuale utente
Detection Systems
Detection Systems 7090i Istruzioni per il montaggio
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 Manuale utente
Siemens
Siemens FDM273 Manuale utente