4
Hardware Precautions / Maintenance
1. Do not disassemble or try to repair your AGM-0150 Gaming Device or any of its
components. Doing so voids your warranty.
2. Always switch off the AGM-0150 before connecting to your TV.
3. Do not store yourAGM-0150 in a humid place, on the floor or in any location where it may
collect dirt, dust, and lint, etc.
4. Do not drop, hit or otherwise abuse your AGM-0150 or its components.
5. Make sure all connections to the AGM-0150 are made carefully and inserted into the
correct locations only. Hold plugs straight when inserting them into a socket.
6. Always hold plugs straight when inserting them into a socket.
7. When disconnecting any plugs from the AGM-0150, first turn the Gaming Device off, then
carefully pull out by the plug itself rather than by the cable as this may cause damage to
the cable. Do not step on, sharply pull or bend any wires and cables.
8. Do not expose the AGM-0150 or any of its components to extreme heat or cold. Your
AGM-0150 may not work when the temperature is too high. So take care not to expose
your AGM-0150 to direct sunlight for extended periods of time.
9. Do not spill liquids on your AGM-0150 or its components. To clean your AGM-0150, use a
soft slightly damp cloth. Always allow all the components to dry completely before using
again.
10. Do not rapidly turn the power switch on and off, as this may shorten the life of batteries.
11. For the best game image, look directly at the AGM-0150 display on your TV screen and
only operate in good light.
