Poly Savi 7410 Office Manuale utente

Savi 7410/7420 Office

DECT Wireless Headset System

User Guide

Contents

DECT Information 3

DECT Enhanced Security 3

Overview 4

Your headset system 4

Headset overview 4

Base overview 5

Accessories 6

Connect your headset system 7

Desk phone setup details 7

Position Your Base 9

Fit and charge 10

Wear on the right or left 10

Charge your headset 10

Headset battery status 10

Talk Time 10

Replace rechargeable battery 11

Load software 12

Update your Poly device 12

Pair to your mobile phone 13

Auto connect feature 13

Transfer mobile audio 13

Disconnect your mobile phone 13

The basics 14

Headset overview 14

Power on your headset 14

Adjust volume 14

Launch Microsoft Teams (Teams model only) 15

Change your default line 15

Get a dial tone 15

Stream audio 15

Make, answer, end calls 16

Make a call 16

End/take a call 16

Mute 16

Answer a second call 16

Reject a Mobile Call 16

Merge a call from 2 sources 16

Set up a conference call 17

More Features 18

Change voice prompt language 18

Optimize audio quality 18

Limit office noise 18

Remove or connect a headset charge cradle 18

Set the range 18

Automatic secure subscription 19

Troubleshooting 20

Headset 20

Desk Phone 21

Mobile 21

Softphone 22

Safety warnings 24

Safety Instructions 24

Support 26

DECT Information

DECT products should never be used outside the region in which they were originally

purchased and intended to be used.

The enclosed DECT 6.0 wireless product uses restricted wireless radio frequencies which

vary by country. DECT 6.0 devices are generally authorized for use in the US/Canada/

Mexico. Use of this DECT 6.0 product in unauthorized countries is a violation of law, may

disrupt telecommunications networks and devices, and can subject you to fines and

penalties by regulatory agencies.

DECT Enhanced Security

Poly is a member of the DECT Forum and has fully adopted their recommendations for

enhancements to security within all DECT products.

Poly DECT-based products now fully incorporate the latest recommendations on

Enhanced Security from the DECT Forum and ETSI. These improvements cover

registration, authentication, authorization and encryption procedures. Poly DECT

products are now secure against known vulnerabilities that were highlighted by the

public announcements of the Chaos Communication Congress in 2009.

Poly DECT products have been tested against and passed the DECT Forum security

certification requirements and consequently have been granted 'DECT Forum security'

logo certification.

Poly DECT products using the new enhanced version of DECT that includes these

security improvements are marked on the base with the DECT Forum security logo.

Overview

Your headset system

Your DECT™ headset system has 3-way connectivity to computer, desk phone and

mobile phone.

Headset overview

Note: Headset design may vary but function is the same.

Volume up

/ Call / Press to interact with Microsoft Teams (Teams model only, app

required)

Volume down

Power

Mute/unmute

Be safe

Please read the safety guide for important safety and regulatory information before

using your new device.

Base overview

Front view

1Desk phone button

2Computer button

3Back button

4Base screen

5Navigation wheel (scroll/press)

6Headset charge cradle

7Mobile phone button

8Mute button or Microsoft Teams button (varies by model)

Back view

FEDCBA

4567

1Headset charge cradle

2Back button

3Navigation wheel (scroll/press)

4Telephone interface cable jack

5Handset lifter jack

6Computer cable USB-C port

7Power jack

8Desk phone configuration switch

9Cradle release slider

Accessories

1 Electronic hookswitch cable (EHS cable) Electronically and automatically answers/

ends a desk phone call. Enables remote call control with your headset.

2 HL10 lifter Automatically lifts handset and returns it to the cradle. Enables remote

call control with your headset.

Connect your headset system

Using the diagram, connect the base to your computer, power outlet and desk phone's

headset port, if available. Otherwise, connect the base to your handset port.

FEDCBA OR

NO HEADSET PORT

HEADSET PORT

Desk phone Base configuration setting (on back of base)

Most phones A

Cisco phones D

Cisco phones with EHS cable A

Desk phone setup details

Your desk phone setup method varies by desk phone and connection accessories.

Choose a desk phone setup A, B, C or D and connect cables.

A Desk phone with dedicated headset port

• Connect one end of the telephone interface cable to the back of the base

• Connect the other end of the telephone interface cable into the dedicated headset

port on the desk phone

Important: Cisco phones use configuration D on the back of the base. Most other

phones use default configuration A. Use this setup if you are not using the HL10 lifter

or EHS cable. In this configuration, press both the headset button on your desk

phone and the call control button on the headset to answer or end calls.

B Desk phone (standard)

• Connect one end of the telephone interface cable to the back of the base

• Disconnect the handset coil cord from the base of the desk phone and re-connect

it to the telephone interface cable junction box

• Finally connect the remaining end of the telephone interface cable into the open

handset port on the desk phone

Important: Cisco phones use configuration D on the back of the base. Most other

phones use default configuration A.

Note: Use this setup if you are not using the HL10 lifter or EHS cable and your desk

phone does not have a dedicated headset port. In this configuration, manually remove

the handset on your desk phone and press the call control button on the headset to

answer or end calls.

C Desk phone + EHS cable (sold separately)

Important: Use configuration A on the back of the base, which works for most

phones including Cisco phones.

D Desk phone + HL10 lifter (sold separately)

Important: Cisco phones use configuration D on the back of the base. Most other

phones use default configuration A.

Position Your Base

The minimum recommended separation between your desk phone and the base is 6

inches.

The minimum recommended separation between the base and computer is 12 inches.

Incorrect position can cause noise and interference problems.

Note: Headset cradle may vary, but function is the same.

Fit and charge

Wear on the right or left

• To position the microphone on the right or left side, rotate the microphone boom up

and over. Bend the boom so it is approximately 2 finger widths from the corner of

your mouth.

• Gently flex the headband wider if the fit is uncomfortable on your ears.

Charge your headset

Place the headset in the charge cradle. The charging LED flashes when charging the

headset and remains steady when the headset is fully charged. Charge for at least 20

minutes prior to the first use.

Headset battery status

Determine your headset battery status:

• Listen to the voice prompts after powering on the headset

• With your headset idle, view the headset battery level on your base display's

homescreen

• View in Poly Lens Desktop App

• View headset LEDs while charging in your base charge cradle

Headset battery status Base display

homescreen or Poly

Lens Desktop App

Headset LED

while charging

Battery full

Battery high

Battery medium

Battery low

Battery critical

Tip: To reset the accuracy of the talk time alert, deplete the headset battery then charge

fully.

Talk Time

With a full charge, the headset provides up to 13 hours of talk time.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Poly Cuffia

Poly

Poly Plantronics BackBeat Pro+ Manuale utente

Poly

Poly Savi 8200 Series Manuale utente

Poly

Poly Voyager Focus 2 Manuale utente

Poly

Poly UC Series Manuale utente

Poly

Poly Voyager 8200 UC Manuale utente

Poly

Poly Voyager 4300 UC Series Manuale utente

Poly

Poly Voyager 6200 UC Manuale utente

Poly

Poly Savi 8210 Office Manuale utente

Poly

Poly Savi 7310 UC Manuale utente

Poly

Poly 7W076AA Manuale utente

Poly

Poly Savi 8210 Office Manuale utente

Poly

Poly Voyager 8200 UC Manuale utente

Poly

Poly Voyager 5200 Series Manuale utente

Poly

Poly Savi 8240 UC Manuale utente

Poly

Poly Voyager Focus UC Manuale utente

Poly

Poly Savi 7310 Manuale utente

Poly

Poly PL-SR85-M Manuale utente

Poly

Poly Savi 8210 Office Manuale utente

Poly

Poly Savi 8445 Office Manuale utente

Poly

Poly Savi 7210 Office Manuale utente

Poly

Poly Savi 8245 Office Manuale utente

Poly

Poly Voyager 5200 UC Manuale utente

Poly

Poly Savi 8240 Office Manuale utente

Poly

Poly Savi 8210 Office Manuale utente

Manuali Cuffia popolari di altre marche

Sena

Sena SMH10 Manuale utente

IASUS

IASUS Stealth IA-NT4-BASIC-BT Manuale utente

Sennheiser

Sennheiser EPOS ADAPT 230 Manuale utente

Doro

Doro Flexus HS2005 Manuale utente

GE 98971 Manuale utente

Hama

Hama 00184070 Manuale utente

Plantronics

Plantronics Blackwire 3200 Series Manuale utente

Blue Tiger

Blue Tiger Advantage PLUS Manuale utente

Jawbone

Jawbone Icon Manuale utente

Jabra

Jabra FR 20 Manuale utente

Roxcore

Roxcore Flow A+ Manuale utente

Turtle Beach

Turtle Beach XP 510 Manuale utente

Philips

Philips SHB6101 Manuale utente

Jabra

Jabra PRO 9460 Duo Manuale utente

HyperX

HyperX HyperX Cloud Flight Manuale utente

Bose

Bose MIE2 Mobile Manuale utente

Jabra

Jabra Steel Manuale utente

HyperX

HyperX cloud ii Manuale utente