Polycom RealPresence Immersive Studio Manuale di servizio
ADMINISTRATOR GUIDE 6.1.0 | February 2017 | 3725-66892-005A
Polycom® RealPresence
Immersive Telepresence (ITP)
Copyright© 2017, Polycom, Inc. All rights reserved. No part of this document may be reproduced,
translated into another language or format, or transmitted in any form or by any means, electronic or
mechanical, for any purpose, without the express written permission of Polycom, Inc.
6001 America Center Drive
San Jose, CA 95002
USA
Trademarks Polycom®, the Polycom logo and the names and marks associated with Polycom products
are trademarks and/or service marks of Polycom, Inc. and are registered and/or common law marks in the
United States and various other countries.
All other trademarks are property of their respective owners. No portion hereof may be reproduced or
transmitted in any form or by any means, for any purpose other than the recipient's personal use, without
the express written permission of Polycom.
End User License Agreement BY USING THIS PRODUCT, YOU ARE AGREEING TO THE TERMS OF
THE END USER LICENSE AGREEMENT (EULA) AT: http://documents.polycom.com/indexes/licenses.
IF YOU DO NOT AGREE TO THE TERMS OF THE EULA, DO NOT USE THE PRODUCT, AND YOU
MAY RETURN IT IN THE ORIGINAL PACKAGING TO THE SELLER FROM WHOM YOU PURCHASED
THE PRODUCT.
Patent Information The accompanying product may be protected by one or more U.S. and foreign
patents and/or pending patent applications held by Polycom, Inc.
Open Source Software Used in this Product This product may contain open source software. You may
receive the open source software from Polycom up to three (3) years after the distribution date of the
applicable product or software at a charge not greater than the cost to Polycom of shipping or distributing
the software to you. To receive software information, as well as the open source software code used in
this product, contact Polycom by email at mailto:[email protected] (for video products) or
mailto:[email protected] (for voice products).
Disclaimer While Polycom uses reasonable efforts to include accurate and up-to-date information in this
document, Polycom makes no warranties or representations as to its accuracy. Polycom assumes no
liability or responsibility for any typographical or other errors or omissions in the content of this document.
Limitation of Liability Polycom and/or its respective suppliers make no representations about the
suitability of the information contained in this document for any purpose. Information is provided "as is"
without warranty of any kind and is subject to change without notice. The entire risk arising out of its use
remains with the recipient. In no event shall Polycom and/or its respective suppliers be liable for any
direct, consequential, incidental, special, punitive or other damages whatsoever (including without
limitation, damages for loss of business profits, business interruption, or loss of business information),
even if Polycom has been advised of the possibility of such damages.
Customer Feedback We are striving to improve our documentation quality and we appreciate your
feedback. Email your opinions and comments to mailto:[email protected].
Polycom Support Visit the Polycom Support Center for End User License Agreements, software
downloads, product documents, product licenses, troubleshooting tips, service requests, and more.
Contents
Before You Begin............................................................................................... 4
Get Help.............................................................................................................................. 4
Polycom Partner and Solution Resources................................................................4
The Polycom Community......................................................................................... 4
Getting Started with ITP.....................................................................................5
RealPresence OTX Studio Monitor Lifts............................................................................. 5
Automatically Controlling Monitor Lifts..................................................................... 5
Manually Controlling Monitor Lifts............................................................................ 5
Control the Monitor Lifts from the Web Interface......................................................5
Obtaining the Network Parameters..................................................................................... 6
Using a Provisioning Service............................................................................7
Enable a Provisioning Service............................................................................................ 7
Configure a Provisioning Service........................................................................................ 7
Set Up the Distributed Media Service................................................................................. 8
Configure the Distributed Media Service..................................................................9
Certificates and Security Profiles within a Provisioned System............................. 11
SNMP Condition Reports.................................................................................12
Download MIBs for SNMP Management.......................................................................... 12
Configure SNMP Management......................................................................................... 12
Configuring General System Settings............................................................15
Name the System..............................................................................................................15
Set the Date and Time...................................................................................................... 15
Configuring Network Settings.........................................................................17
Configure LAN Properties................................................................................................. 17
Configuring the IP Addresses of the Component Codecs.................................................20
Exit Immersive Mode..............................................................................................20
Change the IP Address of the Primary Codec....................................................... 20
Change the IP Address of the Secondary Codecs.................................................20
Configure Network Quality Settings....................................................................... 21
Configure SIP Settings........................................................................................... 22
SIP Address Naming Convention...........................................................................25
Polycom, Inc. 1
Configuring SIP Settings for Integration with Microsoft Servers.............................25
Configuring SIP Settings for Integration with the Telepresence Interoperability
Protocol (TIP).................................................................................................... 26
Configure Servers............................................................................................................. 28
Setting Up a Directory Server in Standard Operating Mode.................................. 28
Setting Up a Directory Server with RealPresence Resource Manager
Provisioning.......................................................................................................28
Configure the Skype for Business Directory Server............................................... 29
Immersive Settings............................................................................................................30
Room Control Devices...................................................................................................... 30
Securing the System........................................................................................31
Configure the System for Use with a Firewall or NAT.......................................................31
H.460 NAT Firewall Traversal................................................................................ 34
External Authentication..................................................................................................... 35
Configure Access Settings..................................................................................... 35
Set Password Requirements.............................................................................................37
Encryption Settings........................................................................................................... 39
Enable Encryption.................................................................................................. 39
Configure Local Access.................................................................................................... 40
Create a CSR......................................................................................................... 41
Configure Certificate Validation Settings................................................................42
Monitor a Room or Call..................................................................................................... 43
View the Sessions List...................................................................................................... 43
View the Security Profile................................................................................................... 44
Low Security Profile Definition................................................................................44
Audio Settings.................................................................................................. 52
Configure Audio Settings.................................................................................................. 52
3.5mm Audio Input Selection in a RealPresence OTX Studio System.................. 53
Enable 3.5mm Audio Input in a RealPresence OTX Studio System...................... 53
Set Up Audio Meters.............................................................................................. 53
Calibrate the Microphones..................................................................................... 54
Video Settings.................................................................................................. 55
Prevent Monitor Burn-In.................................................................................................... 55
Configure Video Inputs......................................................................................................55
Configure Camera Sleep Mode.........................................................................................56
Call Settings......................................................................................................57
Contents
Polycom, Inc. 2
Set Time in Call.................................................................................................................57
Set the Maximum Time in a Call....................................................................................... 58
Set the Preferred Method for Placing Calls.......................................................................58
Setting Up Audio-Only Calls..............................................................................................59
Enable Audio-Only Calls........................................................................................ 59
Disable Audio-Only Calls........................................................................................59
Select the Call Type Order for Audio-Only Order Calls..........................................59
Configure Dialing Preferences.......................................................................................... 59
Enable Calling the Help Desk........................................................................................... 60
Supported Call Types for Help Desk.................................................................................61
Enabling Mobile Devices as Controllers........................................................ 62
Pairing Settings................................................................................................................. 62
Polycom Touch Device...........................................................................................62
Calling............................................................................................................... 63
Place a Call....................................................................................................................... 63
Call a Speed Dial Contact................................................................................................. 63
Place an Audio-Only Call.................................................................................................. 63
System Maintenance........................................................................................64
Enable Software Options.................................................................................................. 64
Upgrade System Software................................................................................................ 64
Upgrade Software from a Web Server................................................................... 64
Upgrade Software from a Computer...................................................................... 65
View the Log File Status.........................................................................................65
Troubleshooting............................................................................................... 66
Access System Diagnostics.............................................................................................. 66
System Diagnostics...........................................................................................................66
Display Call Statistics........................................................................................................67
Display System Status...................................................................................................... 68
Download Logs................................................................................................................. 69
Configure System Log Settings.........................................................................................69
Restart the System............................................................................................................71
Call Detail Report (CDR)...................................................................................................71
Generate the CDR..................................................................................................71
Information in the Call Detail Report (CDR)........................................................... 71
View Room Control Devices............................................................................................. 75
Contents
Polycom, Inc. 3
Before You Begin
Topics:
•Get Help
This guide is intended for administrators who need to configure, customize, manage, and troubleshoot
Polycom® RealPresence Immersive Studio®, Polycom® RealPresence Immersive Studio® Flex, and
Polycom® RealPresence® OTX® Studio systems. Refer to this guide after installation of the furniture and
video communication systems is complete.
Note: In this document, when you see “ RealPresence ITP ” systems, the content applies to
RealPresence Immersive Studio, RealPresence Immersive Studio Flex, and
RealPresence OTX Studio systems. If content applies to specific products only, the
product names are included.
Please read the RealPresence ITP system documentation before you install or operate the system.
Related documents for RealPresence ITP systems are available from Documents and Downloads at
Polycom Support.
For support or service, please contact your Polycom distributor or go online to Polycom Support.
Get Help
For more information about installing, configuring, and administering Polycom products, refer to
Documents and Downloads at Polycom Support.
Polycom Partner and Solution Resources
To find all Polycom partner solutions, see Strategic Global Partner Solutions.
Polycom Implementation and Maintenance services provide support for Polycom solution components
only. Additional services for supported third-party Unified Communications (UC) environments integrated
with Polycom solutions are available from Polycom Global Services and its certified Partners. These
additional services help customers successfully design, deploy, optimize and manage Polycom visual
communications within their UC environments.
Professional Services for Microsoft Integration is mandatory for Microsoft Office Communications Server,
Microsoft Lync Server 2013, Skype for Business Server 2015, or Office 365 integrations. For additional
information and details, refer to http://www.polycom.com/services/professional_services/index.html or
contact your local Polycom representative.
The Polycom Community
The Polycom Community gives you access to the latest developer and support information. Participate in
discussion forums to share ideas and solve problems with your colleagues. To register with the Polycom
Community, simply create a Polycom online account. When logged in, you can access Polycom support
personnel and participate in developer and support forums to find the latest information on hardware,
software, and partner solutions topics.
Polycom, Inc. 4
Getting Started with ITP
Topics:
•RealPresence OTX Studio Monitor Lifts
•Obtaining the Network Parameters
The RealPresence Immersive Studio, RealPresence Immersive Studio Flex, and RealPresence OTX
Studio systems are state-of-the-art visual collaboration tools. With crisp, clean video and crystal-clear
sound, RealPresence ITP systems provide natural video conferencing interaction using the most robust
video communications technology.
If your organization has signed on for Video Network Operations Center (VNOC) services, the VNOC will
handle many telepresence conferencing tasks for you.
RealPresence OTX Studio Monitor Lifts
You can raise or lower RealPresence OTX Studio table monitor lifts for optimum conference viewing. The
monitor lifts are partially automated and can also be manually controlled.
Automatically Controlling Monitor Lifts
All three monitors automatically raise or lower in the following circumstances:
• When content is started the monitors rise.
• When content is used during a call and the call ends, the monitors lower.
• When the system powers on or during a restart the monitors lower. During initial start-up and
restarts all monitor controls are locked.
Manually Controlling Monitor Lifts
After initial start-up, the individual buttons in the RealPresence OTX Studio table toggle the state of the
associated lift. Full extension or retraction takes about 15 seconds. If you use the buttons while the
monitors are moving, the direction the monitors are traveling reverses. The monitors will only fully stop in
the middle of travel during a mechanical collision or a system power failure.
Control the Monitor Lifts from the Web Interface
You can raise or lower RealPresence OTX Studio table monitor lifts for optimum conference viewing. You
can raise or lower all three monitors from the web interface.
Procedure
»Go to Utilities > Tools > OTX Setup and select Up or Down.
Polycom, Inc. 5
Obtaining the Network Parameters
To perform some of the configuration tasks in this document, you must obtain the proper network
parameters.
Obtain the following network parameters from the customer.
• Subnet Mask
• Default Gateway
• IP addresses
◦ A block of 20 static IP addresses is required.
◦ The base IP should be identified (for example, 10.10.10.x).
◦ Define x as an offset (for example, 50).
◦ The IP addresses should be assigned as shown in the next table.
IP Address Map
...x+ Device ...x+ Device
1 Group Series 700 (A1) 11 Display1 (D1)
2 Group Series 500 (A2) 12 Display2 (D2)
3 Group Series 500 (A3) 13 Display3 (D3)
4 <Reserved> 14 <Reserved>
5 SoundStructure 15 <Reserved>
6 Nport 16 Lutron NWK
7 <Reserved> 17 APC (PWR1)
8 DisplayMatrix 18 APC (PWR2)
9 <Reserved> 19 APC (PWR3)
10 Tablet 20 Ethernet Switch (if
required)
Getting Started with ITP
Polycom, Inc. 6
Using a Provisioning Service
Topics:
•Enable a Provisioning Service
•Configure a Provisioning Service
•Set Up the Distributed Media Service
A provisioning service prepares and equips your network to provide services to its users.
Enable a Provisioning Service
To register the RealPresence ITP system with the Polycom RealPresence Resource Manager system,
enter the registration information and attempt to register by going to Admin Settings in the RealPresence
ITP system web interface. Multiple RealPresence ITP systems can be registered to a single user.
Procedure
1. Go to Admin Settings > Servers > Provisioning Service.
2. Select the Enable Provisioning setting.
3. Enter the Domain, User Name, Password, and Server Address for automatic provisioning.
4. Select Register or Update.
The system tries to register with the Polycom RealPresence Resource Manager system using
NTLM authentication.
Configure a Provisioning Service
If automatic provisioning is enabled but the system does not register successfully with the provisioning
service, you might need to change the Domain, User Name, Password, or Server Address used for
registration. For example, users might be required to periodically reset passwords used to log into the
network from a computer. If such a network password is also used as the provisioning service password,
you must update it on the RealPresence ITP system, too.
To avoid unintentionally locking a user out of network access in this case, RealPresence ITP systems will
not automatically retry registration until you update the settings and register manually on the Provisioning
Service page.
Procedure
1. Go to Admin Settings > Servers > Provisioning Service.
2. Configure these settings.
Provisioning Service Settings
Setting Description
Domain Specifies the domain for registering to the
provisioning service.
Polycom, Inc. 7
Setting Description
User Name Specifies the endpoint's user name for registering
to the provisioning service.
Password Specifies the password that registers the system to
the provisioning service.
Server Address Specifies the address of the Polycom
RealPresence Resource Manager system running
the provisioning service.
Set Up the Distributed Media Service
By default, the RealPresence ITP systems supports the Polycom® RealPresence® Distributed Media
Application™ (DMA®). RealPresence DMA enables multipoint conferences.
Procedure
1. Go to the admin interface of RMX and configure DMA as the H323 gatekeeper and SIP server.
2. Login to the DMA web interface with a user account having Administrator privileges.
3. Configure MCU in DMA:
a) In the DMA menu, go to Network > MCU > MCUs and press Add on the ACTIONS pane
to add the details of the MCU (RMX) that you want to use for your conferencing needs.
b) After filling in the details of the MCU (RMX), press OK.
Make sure that the MCU state shows as "Connected to .. MCU“ and "In service" as
indicated by the status indicators in the first column of the table displayed in Network >
MCU > MCUs.
4. Configure MCU pool:
a) Go to Network > MCU > MCU Pools and press Add on the ACTIONS pane to add a MCU
Pool.
The Add MCU Pool window appears.
b) Name the pool and select the MCU that was added previously in step 3 and move it to the
Selected MCUs section.
Press OK.
5. Configure MCU pool order:
a) Go to Network > MCU > MCU Pool Orders and press Add on the ACTIONS pane to add
a MCU Pool order.
The Add MCU Pool Order window appears.
b) Name the pool order and select the MCU pool that was added previously in step 4 and
move it to the Selected MCU pools section.
Press OK.
6. Configure the conference template:
a) Go to Admin > Conference Manager > Conference Templates and press Add on the
ACTIONS pane to add a conference template.
Using a Provisioning Service
Polycom, Inc. 8
Altri manuali per RealPresence Immersive Studio
2
Questo manuale è adatto per i seguenti modelli
2
Indice
Altri manuali Polycom Sistema di conferenza
Polycom
Polycom RMX 1000 Manuale utente
Polycom
Polycom RealPresence Group Series Manuale utente
Polycom
Polycom Vortex Series Supplemento
Polycom
Polycom ATX 200 Istruzioni di montaggio
Polycom
Polycom IPOWER 9000 Manuale utente
Polycom
Polycom VSX 3000 Manuale di servizio
Polycom
Polycom HDX Desktop Systems Manuale utente
Polycom
Polycom ViewStation vsx7000 Manuale di istruzioni
Polycom
Polycom SoundStation 2W Manuale di servizio
Polycom
Polycom VSX VSX 6000 Manuale utente
Polycom
Polycom IPOWER 9000 Scheda informativa del prodotto
Polycom
Polycom VSX 3000 Manuale utente
Polycom
Polycom MGC+100 ReadiConvene Guida all'installazione
Polycom
Polycom NOT FOUND VTX 1000 Come usare
Polycom
Polycom V500 Manuale di istruzioni
Polycom
Polycom realpresence group 550 Manuale utente
Polycom
Polycom RealPresence Medialign 255 Manuale utente
Polycom
Polycom RealPresence Utility Cart 500 Manuale utente
Polycom
Polycom RMX 2000 Istruzioni per l'installazione
Polycom
Polycom CX5000 Manuale utente
Manuali Sistema di conferenza popolari di altre marche
Kramer
Kramer VIA GO Manuale utente
AVT
AVT MAGIC AC1 Go Manuale utente
ProSoft Technology
ProSoft Technology AN-X4-AB-DHRIO Manuale utente
Sony
Sony PCS-I150 Manuale utente
Middle Atlantic Products
Middle Atlantic Products VTC Series Manuale utente
Prentke Romich Company
Prentke Romich Company Vanguard Plus Guida
