Polycom VVX 500 Manuale

Polycom VVX

Admin Guide

Schmooze Com Inc.

500, 600 & 1500

DND

HEADSET

HOLD

TRANSFER

CONF

SP PHONE

REDIAL

APP

DIR

MSG

ABC

GHI

JKL

MNO

PQRS

TUV

WXYZ

OPER

DEF

How To Find The IP Address

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Status” option and press the “Select” button.

3. Scroll down to the “Platform” option and press the “Select” button.

4. Scroll down to the “Phone” option and press the “Select” button.

5. Use the up/down arrow key to scroll through the list of information to see the IP Address.

How To Find The MAC Address

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Status” option and press the “Select” button.

3. Scroll down to the “Network” option and press the “Select” button.

4. Scroll down to the “Ethernet” option and press the “Select” button.

5. Use the up/down arrow key to scroll through the list of information to see

the MAC Address.

How To Set The Configuration Server

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Settings” option and press the “Select” button.

3. Scroll down to the “Advanced” option and press the “Select” button.

4. Enter the admin password and press the “Enter” button. Default factory password is 456.

5. Scroll down to the “Admin Settings” option and press the “Select” button.

6. Scroll down to the “Network Configuration” option and press the

“Select” button.

7. Scroll down to the “Server Menu” option and press the “Select” button.

8. Pick the Server Type such as TFTP and set the Server Address and press the “Select” button.

The Server address would be the IP address of your PBX.

How To Factory Default

Quick Steps

1.Press the “Menu” button.

2. Scroll down to the “Settings” option and press the “Select” button.

3. Scroll down to the “Advanced” option and press the “Select” button.

4. Enter the admin password and press the “Enter” button. Default factory password is 456.

5. Scroll down to the “Admin Settings” option and press the “Select button”.

6. Scroll down to the “Reset to Default” option and press the “Select” button.

7. Scroll down to the “Format File System” option and press the “Select” button.

How To Find The IP Address

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Status” option and press the “Select” button.

3. Scroll down to the “Platform” option and press the “Select” button.

4. Scroll down to the “Phone” option and press the “Select” button.

5. Use the up/down arrow key to scroll through the list of information to see the IP Address.

How To Find The MAC Address

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Status” option and press the “Select” button.

3. Scroll down to the “Network” option and press the “Select” button.

4. Scroll down to the “Ethernet” option and press the “Select” button.

5. Use the up/down arrow key to scroll through the list of information to see

the MAC Address.

How To Set The Configuration Server

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Settings” option and press the “Select” button.

3. Scroll down to the “Advanced” option and press the “Select” button.

4. Enter the admin password and press the “Enter” button. Default factory password is 456.

5. Scroll down to the “Admin Settings” option and press the “Select” button.

6. Scroll down to the “Network Configuration” option and press the

“Select” button.

7. Scroll down to the “Server Menu” option and press the “Select” button.

8. Pick the Server Type such as TFTP and set the Server Address and press the “Select” button.

The Server address would be the IP address of your PBX.

How To Factory Default

Quick Steps

1.Press the “Menu” button.

2. Scroll down to the “Settings” option and press the “Select” button.

3. Scroll down to the “Advanced” option and press the “Select” button.

4. Enter the admin password and press the “Enter” button. Default factory password is 456.

5. Scroll down to the “Admin Settings” option and press the “Select button”.

6. Scroll down to the “Reset to Default” option and press the “Select” button.

7. Scroll down to the “Format File System” option and press the “Select” button.

How To Find The IP Address

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Status” option and press the “Select” button.

3. Scroll down to the “Platform” option and press the “Select” button.

4. Scroll down to the “Phone” option and press the “Select” button.

5. Use the up/down arrow key to scroll through the list of information to see the IP Address.

How To Find The MAC Address

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Status” option and press the “Select” button.

3. Scroll down to the “Network” option and press the “Select” button.

4. Scroll down to the “Ethernet” option and press the “Select” button.

5. Use the up/down arrow key to scroll through the list of information to see

the MAC Address.

How To Set The Configuration Server

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Settings” option and press the “Select” button.

3. Scroll down to the “Advanced” option and press the “Select” button.

4. Enter the admin password and press the “Enter” button. Default factory password is 456.

5. Scroll down to the “Admin Settings” option and press the “Select” button.

6. Scroll down to the “Network Configuration” option and press the

“Select” button.

7. Scroll down to the “Server Menu” option and press the “Select” button.

8. Pick the Server Type such as TFTP and set the Server Address and press the “Select” button.

The Server address would be the IP address of your PBX.

How To Factory Default

Quick Steps

1.Press the “Menu” button.

2. Scroll down to the “Settings” option and press the “Select” button.

3. Scroll down to the “Advanced” option and press the “Select” button.

4. Enter the admin password and press the “Enter” button. Default factory password is 456.

5. Scroll down to the “Admin Settings” option and press the “Select button”.

6. Scroll down to the “Reset to Default” option and press the “Select” button.

7. Scroll down to the “Format File System” option and press the “Select” button.

How To Find The IP Address

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Status” option and press the “Select” button.

3. Scroll down to the “Platform” option and press the “Select” button.

4. Scroll down to the “Phone” option and press the “Select” button.

5. Use the up/down arrow key to scroll through the list of information to see the IP Address.

How To Find The MAC Address

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Status” option and press the “Select” button.

3. Scroll down to the “Network” option and press the “Select” button.

4. Scroll down to the “Ethernet” option and press the “Select” button.

5. Use the up/down arrow key to scroll through the list of information to see

the MAC Address.

How To Set The Configuration Server

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Settings” option and press the “Select” button.

3. Scroll down to the “Advanced” option and press the “Select” button.

4. Enter the admin password and press the “Enter” button. Default factory password is 456.

5. Scroll down to the “Admin Settings” option and press the “Select” button.

6. Scroll down to the “Network Configuration” option and press the

“Select” button.

7. Scroll down to the “Server Menu” option and press the “Select” button.

8. Pick the Server Type such as TFTP and set the Server Address and press the “Select” button.

The Server address would be the IP address of your PBX.

How To Factory Default

Quick Steps

1.Press the “Menu” button.

2. Scroll down to the “Settings” option and press the “Select” button.

3. Scroll down to the “Advanced” option and press the “Select” button.

4. Enter the admin password and press the “Enter” button. Default factory password is 456.

5. Scroll down to the “Admin Settings” option and press the “Select button”.

6. Scroll down to the “Reset to Default” option and press the “Select” button.

7. Scroll down to the “Format File System” option and press the “Select” button.

How To Find The IP Address

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Status” option and press the “Select” button.

3. Scroll down to the “Platform” option and press the “Select” button.

4. Scroll down to the “Phone” option and press the “Select” button.

5. Use the up/down arrow key to scroll through the list of information to see the IP Address.

How To Find The MAC Address

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Status” option and press the “Select” button.

3. Scroll down to the “Network” option and press the “Select” button.

4. Scroll down to the “Ethernet” option and press the “Select” button.

5. Use the up/down arrow key to scroll through the list of information to see

the MAC Address.

How To Set The Configuration Server

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Settings” option and press the “Select” button.

3. Scroll down to the “Advanced” option and press the “Select” button.

4. Enter the admin password and press the “Enter” button. Default factory password is 456.

5. Scroll down to the “Admin Settings” option and press the “Select” button.

6. Scroll down to the “Network Configuration” option and press the

“Select” button.

7. Scroll down to the “Server Menu” option and press the “Select” button.

8. Pick the Server Type such as TFTP and set the Server Address and press the “Select” button.

The Server address would be the IP address of your PBX.

How To Factory Default

Quick Steps

1.Press the “Menu” button.

2. Scroll down to the “Settings” option and press the “Select” button.

3. Scroll down to the “Advanced” option and press the “Select” button.

4. Enter the admin password and press the “Enter” button. Default factory password is 456.

5. Scroll down to the “Admin Settings” option and press the “Select button”.

6. Scroll down to the “Reset to Default” option and press the “Select” button.

7. Scroll down to the “Format File System” option and press the “Select” button.

How To Find The IP Address

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Status” option and press the “Select” button.

3. Scroll down to the “Platform” option and press the “Select” button.

4. Scroll down to the “Phone” option and press the “Select” button.

5. Use the up/down arrow key to scroll through the list of information to see the IP Address.

How To Find The MAC Address

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Status” option and press the “Select” button.

3. Scroll down to the “Network” option and press the “Select” button.

4. Scroll down to the “Ethernet” option and press the “Select” button.

5. Use the up/down arrow key to scroll through the list of information to see

the MAC Address.

How To Set The Configuration Server

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Settings” option and press the “Select” button.

3. Scroll down to the “Advanced” option and press the “Select” button.

4. Enter the admin password and press the “Enter” button. Default factory password is 456.

5. Scroll down to the “Admin Settings” option and press the “Select” button.

6. Scroll down to the “Network Configuration” option and press the

“Select” button.

7. Scroll down to the “Server Menu” option and press the “Select” button.

8. Pick the Server Type such as TFTP and set the Server Address and press the “Select” button.

The Server address would be the IP address of your PBX.

How To Factory Default

Quick Steps

1.Press the “Menu” button.

2. Scroll down to the “Settings” option and press the “Select” button.

3. Scroll down to the “Advanced” option and press the “Select” button.

4. Enter the admin password and press the “Enter” button. Default factory password is 456.

5. Scroll down to the “Admin Settings” option and press the “Select button”.

6. Scroll down to the “Reset to Default” option and press the “Select” button.

7. Scroll down to the “Format File System” option and press the “Select” button.

How To Find The IP Address

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Status” option and press the “Select” button.

3. Scroll down to the “Platform” option and press the “Select” button.

4. Scroll down to the “Phone” option and press the “Select” button.

5. Use the up/down arrow key to scroll through the list of information to see the IP Address.

How To Find The MAC Address

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Status” option and press the “Select” button.

3. Scroll down to the “Network” option and press the “Select” button.

4. Scroll down to the “Ethernet” option and press the “Select” button.

5. Use the up/down arrow key to scroll through the list of information to see

the MAC Address.

How To Set The Configuration Server

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Settings” option and press the “Select” button.

3. Scroll down to the “Advanced” option and press the “Select” button.

4. Enter the admin password and press the “Enter” button. Default factory password is 456.

5. Scroll down to the “Admin Settings” option and press the “Select” button.

6. Scroll down to the “Network Configuration” option and press the

“Select” button.

7. Scroll down to the “Server Menu” option and press the “Select” button.

8. Pick the Server Type such as TFTP and set the Server Address and press the “Select” button.

The Server address would be the IP address of your PBX.

How To Factory Default

Quick Steps

1.Press the “Menu” button.

2. Scroll down to the “Settings” option and press the “Select” button.

3. Scroll down to the “Advanced” option and press the “Select” button.

4. Enter the admin password and press the “Enter” button. Default factory password is 456.

5. Scroll down to the “Admin Settings” option and press the “Select button”.

6. Scroll down to the “Reset to Default” option and press the “Select” button.

7. Scroll down to the “Format File System” option and press the “Select” button.

How To Find The IP Address

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Status” option and press the “Select” button.

3. Scroll down to the “Platform” option and press the “Select” button.

4. Scroll down to the “Phone” option and press the “Select” button.

5. Use the up/down arrow key to scroll through the list of information to see the IP Address.

How To Find The MAC Address

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Status” option and press the “Select” button.

3. Scroll down to the “Network” option and press the “Select” button.

4. Scroll down to the “Ethernet” option and press the “Select” button.

5. Use the up/down arrow key to scroll through the list of information to see

the MAC Address.

How To Set The Configuration Server

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Settings” option and press the “Select” button.

3. Scroll down to the “Advanced” option and press the “Select” button.

4. Enter the admin password and press the “Enter” button. Default factory password is 456.

5. Scroll down to the “Admin Settings” option and press the “Select” button.

6. Scroll down to the “Network Configuration” option and press the

“Select” button.

7. Scroll down to the “Server Menu” option and press the “Select” button.

8. Pick the Server Type such as TFTP and set the Server Address and press the “Select” button.

The Server address would be the IP address of your PBX.

How To Factory Default

Quick Steps

1.Press the “Menu” button.

2. Scroll down to the “Settings” option and press the “Select” button.

3. Scroll down to the “Advanced” option and press the “Select” button.

4. Enter the admin password and press the “Enter” button. Default factory password is 456.

5. Scroll down to the “Admin Settings” option and press the “Select button”.

6. Scroll down to the “Reset to Default” option and press the “Select” button.

7. Scroll down to the “Format File System” option and press the “Select” button.

How To Find The IP Address

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Status” option and press the “Select” button.

3. Scroll down to the “Platform” option and press the “Select” button.

4. Scroll down to the “Phone” option and press the “Select” button.

5. Use the up/down arrow key to scroll through the list of information to see the IP Address.

How To Find The MAC Address

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Status” option and press the “Select” button.

3. Scroll down to the “Network” option and press the “Select” button.

4. Scroll down to the “Ethernet” option and press the “Select” button.

5. Use the up/down arrow key to scroll through the list of information to see

the MAC Address.

How To Set The Configuration Server

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Settings” option and press the “Select” button.

3. Scroll down to the “Advanced” option and press the “Select” button.

4. Enter the admin password and press the “Enter” button. Default factory password is 456.

5. Scroll down to the “Admin Settings” option and press the “Select” button.

6. Scroll down to the “Network Configuration” option and press the

“Select” button.

7. Scroll down to the “Server Menu” option and press the “Select” button.

8. Pick the Server Type such as TFTP and set the Server Address and press the “Select” button.

The Server address would be the IP address of your PBX.

How To Factory Default

Quick Steps

1.Press the “Menu” button.

2. Scroll down to the “Settings” option and press the “Select” button.

3. Scroll down to the “Advanced” option and press the “Select” button.

4. Enter the admin password and press the “Enter” button. Default factory password is 456.

5. Scroll down to the “Admin Settings” option and press the “Select button”.

6. Scroll down to the “Reset to Default” option and press the “Select” button.

7. Scroll down to the “Format File System” option and press the “Select” button.

Altri manuali per VVX 500

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Polycom Telefono IP

Polycom

Polycom SoundPoint IP 550 Manuale utente

Polycom

Polycom SoundPoint IP 550 Manuale di istruzioni

Polycom

Polycom Integra VVX 500 Manuale utente

Polycom

Polycom SoundPoint IP 321 Manuale utente

Polycom

Polycom VVX 310 Manuale di istruzioni

Polycom

Polycom SoundStation 7000 Manuale utente

Polycom

Polycom SoundPoint IP 450 Manuale di istruzioni

Polycom

Polycom SoundPoint IP 300 Manuale di servizio

Polycom

Polycom SoundPoint IP 32x Manuale utente

Polycom

Polycom VoiceStation 500 Manuale utente

Polycom

Polycom SoundPoint IP 335 Manuale utente

Polycom

Polycom IP 550 Manuale utente

Polycom

Polycom SoundPoint IP 300 Manuale

Polycom

Polycom Soundpoint IP 301 Manuale utente

Polycom

Polycom SoundPoint IP 331 Manuale di installazione e funzionamento

Polycom

Polycom SoundPoint IP 501 Manuale utente

Polycom

Polycom VVX 1500 C Manuale di istruzioni

Polycom

Polycom IP 500/501 SIP 2.0 Manuale utente

Polycom

Polycom SoundPoint IP 550 Manuale utente

Polycom

Polycom SoundPoint 320 Manuale utente

Polycom

Polycom SoundPoint IP 500 Guida all'installazione

Polycom

Polycom SoundPoint Pro SE-225 Manuale utente

Polycom

Polycom VVX 1500 Series Manuale di istruzioni

Polycom

Polycom VVX 300 Manuale utente

Manuali Telefono IP popolari di altre marche

Alcatel

Alcatel 4028 Manuale utente

Cisco

Cisco SPA-500 Series Manuale utente

Proximus

Proximus Maestro 3016 IP Manuale utente

Fanvil

Fanvil X4 Manuale utente

Cisco

Cisco 7962 Manuale utente

Snom

Snom 320 Manuale utente

Yealink

Yealink Yealink SIP-T46G Manuale utente

Avaya

Avaya 4625SW Manuale utente

Yealink

Yealink SIP-T52S Manuale utente

Nortel

Nortel 1140E Manuale utente

Nexotek

Nexotek NT-P500 Manuale utente

Avaya

Avaya Integral 5 R3.0 Manuale utente

GE 28320EE2 - Dect 6.0 InfoLink 2 Manuale utente

Avaya

Avaya 4600 Series Manuale di servizio

Mitel

Mitel MIVOICE OFFICE 400 6940 SIP Manuale utente

Nortel

Nortel i2050 Manuale utente

Fiberme

Fiberme FAP260 Series Manuale utente

Meridian

Meridian M5009 Manuale utente