Polygroup TG90M4E28D01 Manuale utente

ASSEMBLY INSTRUCTIONS MADE IN CHINA

3. Each tree section is numbered with a sticker. Please identify all sections before assembling.

4. Assemble the tree from the bottom to the top. Start with the bottom section and insert into the

assembled stand. Make sure the pole is firmly inserted and secured into the stand.

5. Continue by inserting the upper tree section(s) to the lower section(s) until inserting the tree top.

6. Allow branches to fall into place or gently pull up and out.When adjusting branches, be sure that all

wires are free of branch hinges.

7. Just plug the adaptor (connecting with the tree power cord) into the wall outlet (See Fig. B), your

entire tree should now be lit.If some bulbs do not light or flickers, search for any loose plugs and/or

broken, loose or missing bulbs. Replace bulbs promptly in order to maintain the performance and life

expectancy of your pre-lit tree.

8. Begin to shape the branches and tips working from the bottom to the top. Start with tips farthest from

the pole and fan out one to the right, one to the left and one at the center of the main stem.

(See Fig. C)

9. After shaping the entire tree following the previous step, slightly upsweep all branch tips for a uniform

look. Shift branches to fill any gaps.Your Christmas tree is now complete and ready to be decorated.

1. Before you start to assemble your tree, choose an appropriate location near a wall outlet.

2. Assemble the tree stand and place on a level surface. (See Fig. A)

Congratulations on purchasing your new tree from Polygroup®! Carefully follow the instructions

below on how to quickly and easily set up your new tree.

TREE ASSEMBLY INSTRUCTIONS

Top view Side view

Fig. C

*Electrical Rating Of Power Adaptor

(For Outdoor Use Only)

Input: 120V AC, 60Hz, 0.35A Max.

Output: 29V DC, 0.69A

Fig. B - Tree and Light Assembly

Tree top

Section 2

Section 1

Insert Green

Label Extension

Cord into Adaptor

Adaptor

To Be Plugged

Into Wall

Outlet

Control box

MODEL #: TG90M4E28D01 SKU: 741-750

Fig. A - Tree Stand Assembly 1.Unfold the legs and lay the stand in

a flat area.Then slide the locking

disc downward and snap into place.

2.When inserting the bottom section

of the tree into the assembled stand,

thread the eyebolt into the stand

and tighten until the pole is firmly

secured.

Eye Bolt

Insert Red Label

Plugs Into Red

Labeled Extension Cord

Insert Yellow Label

Plugs Into Yellow

Labeled Extension Cord

ASSEMBLY INSTRUCTIONS MADE IN CHINA

1. Remove all ornaments and decorations. For pre-lit trees, first unplug extension cord with adaptor from

the wall outlet and then disconnect light extension cord between each section of the tree.

2. Disassemble the tree from the top to the bottom. Start with the tree top and gently lift straight up to

remove from section below and fold all branches toward the pole.

3. In case of difficulty separating the tree pole (trunk), apply a small amount of lubricant at the joint and

rotate the upper pole in both directions. Lift up the upper pole again.

4. Continue by gently lifting straight up each section(s) from the section below and fold all branches

toward the pole until the bottom section is removed from the tree stand.

5. Carefully place all tree sections into shipping box and tape it shut.

6.When not in use, please store your tree in a cool, dry place away from sunlight. Exposing your tree to

excessive heat or humidity may damage your tree.

STORAGE INSTRUCTIONS

For Pre-lit Trees, If The Tree Does Not Illuminate

1. Please check to make sure that all plugs are properly connected according to the color labels indicated

in Fig.B, make sure the extension cord is connected with the adaptor and pluged into the wall outlet.

Refer to assembly guide for instructions.

2. Please check for loose, broken or missing light bulbs and replace as needed.

Loose Hinge Pin

1. Extra hinge pins are included for repairing the hinges.

Place the branch into the slot of the bracket.

2. Insert a new hinge pin through the hole and secure

using the retainer washer. (See Fig. D)

TROUBLESHOOTING TIPS

Each tree includes hinge pins/washers, and for pre-lit trees spare bulbs are also included. If extra parts are

needed, please contact our customer service center.

SPARE PARTS

Press the selector button on the “Dual Color Light Controller” or

“Remote Controller” to select among:

(1) CLEAR AND MULTI-COLOR ALTERNATING;

(2) CLEAR LIGHTS; (3) MULTI LIGHTS and

(4) TURN OFF BOTH LIGHTS.

HOW TO USE THE DUAL COLOR LIGHT CONTROLLER AND

REMOTE CONTROL:

Light

Controller

Selector

Button

Remote

Controller

HOW TO USE THE REMOTE CONTROLLER :

The remote control is for the wired controller only:

(1) REMOVE THE INSULATION TAB OF THE REMOTE CONTROLLER.

(2) PRESS THE BUTTON TO SELECT DIFFERENT FUNCTIONS, REFER TO “HOW TO USE THE DUAL

COLOR LIGHT CONTROLLER”.

(3) TO REPLACE THE BATTERY, OPEN THE BATTERY COMPARTMENT WITH A COIN. REPLACE

WITH A CR2032 BATTERY.

(4) DISPOSE USED BATTERY PROPERLY. OBSERVE LOCAL REGULATIONS REGARDING DISPOSAL

OF HAZARDOUS WASTE.

(5) ENSURE THE BATTERIES ARE INSTALLED CORRECTLY WITH REGARD TO POLARITY (+ AND -).

(6) WARNING: SMALL PARTS, KEEP AWAY FROM CHILDREN.

(7) REMOVE BATTERIES WHEN NOT USED FOR AN EXTENDED PERIOD OF TIME, OR WHEN

DEPLETED.

(8) CLEAN THE BATTERY CONTACTS PRIOR TO BATTERY INSTALLATION.

Insulation Tab Battery

CR2032

Cover

1. Use only the adaptor supplied with this product. Using a different adaptor will damage the lights

and cause fire, electrical shock hazards.

2. FOR INDOOR USE ONLY.

WARNING

ASSEMBLY INSTRUCTIONS MADE IN CHINA

USER SERVICING INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

When using electrical products, basic precautions should always be followed including the following:

a. READ AND FOLLOW ALL SAFETY INSTRUCTIONS.

b. Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When

products are used in outdoor applications, connect the product to a Ground Fault Circuit Interrupting

(GFCI) outlet. If one is not provided, contact a qualified electrician for proper installation.

c.This seasonal use product is not intended for permanent installation or use.

d. Do not mount or place near gas or electric heaters, fireplaces, candles or other similar sources of heat.

e. Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.

f. Do not let lamps rest on the supply cord or on any wire.

g. Unplug the product when leaving the house, when retiring for the night, or if left unattended.

h.This is not a toy. For decorative use only! To avoid risk of fire, burns, personal injury and electric shock it

should not be played with or placed where small children can reach it.

i. Do not use this product for other than its intended use.

j. Do not hang ornaments or other objects from cord, wire, or light string.

k. Do not close doors or windows on the product or extension cords as this may damage wire insulation.

l. Do not cover the product with cloth, paper or any material not part of the product when in use.

m.This product is equipped with push-in type lamps. Do not twist lamps.

n. Read and follow all instructions that are on the product or provided with the product.

o. SAVE THESE INSTRUCTIONS

3. The external flexible cable or cord of this luminaire cannot be replaced; If the cord is damaged,

the luminaire shall be destroyed.

4. Dispose of used batteries properly by following directions on batteries.

5. Use only CR2032 batteries for the remote controller.

6. DO NOT DISPOSE OF BATTERIES IN FIRE. BATTERIES MAY EXPLODE OR LEAK.

CUSTOMER SERVICE FOR CHRISTMAS TREES

For any questions, assistance, or missing parts, Do Not Return To Place Of Purchase. Please contact

us at 1-888-919-0070 or visit our website at www.polygroupstore.com. One of our customer service

representatives will be happy to assist you.

TREE ID# IS LOCATED ON END PANEL OF BOX.TREE ID# IS REQUIRED WHEN REQUESTING REPLACEMENT PARTS.

Customer Name:

Address(No P.O. Boxes):

City & State:

Zip Code:

Day Phone:

Date Purchased:

Tree ID#:

Tree UPC#:

Store Purchased:

Specify Problem:

Lamp Replacement

Step 1.

Unplug from power source, by pulling out the adaptor itself - do not pull on the power cord.

(For reference only)

Step 3. Replace with a new spare

LED lamp (included).

Step 2. Lift up the lamp lock tab,

and pull the bulb and its

plastic base straight out

from the lampholder.

CAUTION:

1. Risk of fire. Use only the power adaptor provided with this product. Do not replace lamps with other

than the spare lamps provided with this product.

2.To reduce the risk of fire and electric shock:

a. Do not mount or support light strings in a manner that can cut or damage wire insulation, and

b. Use only the power supply cord provided with this product.

Questo manuale è adatto per i seguenti modelli

Altri manuali Polygroup Albero di pino artificiale

Polygroup

Polygroup TG76CH092C08 Manuale utente

Polygroup

Polygroup Home Heritage TG6600MZAC00 Manuale utente

Polygroup

Polygroup TG50P3D94L00 Manuale utente

Polygroup

Polygroup TG76M4244C06 Manuale utente

Polygroup

Polygroup TG76M2AFBD00 Manuale utente

Polygroup

Polygroup H209504 Manuale utente

Polygroup

Polygroup TG76P2657D30 Manuale utente

Polygroup

Polygroup TG7600NY1C06 Manuale utente

Polygroup

Polygroup TG76M2ATCC00 Manuale utente

Polygroup

Polygroup TG76P5433L10 Manuale utente

Polygroup

Polygroup TG80M4C25C00 Manuale utente

Polygroup

Polygroup TV66M2U56C00 Manuale utente

Polygroup

Polygroup TG70P4474C00 Manuale utente

Polygroup

Polygroup TG9000CIKX00 Manuale utente

Polygroup

Polygroup TG70P4842D06 Manuale utente

Polygroup

Polygroup TV76P4429C14 Manuale utente

Polygroup

Polygroup TGC0M4907C02 Manuale utente

Polygroup

Polygroup AR-P17005 Manuale utente

Polygroup

Polygroup TG90P4740S00 Manuale utente

Polygroup

Polygroup TG76M3P51C00 Manuale utente

Polygroup

Polygroup TGC0M3L21C01 Manuale utente

Polygroup

Polygroup TV40M4H50C03 Manuale utente

Polygroup

Polygroup TG70M3H90C00 Manuale utente

Polygroup

Polygroup TG76P4787D00 Manuale utente

Manuali Albero di pino artificiale popolari di altre marche

Trim a Home

Trim a Home TY-S6-250L Manuale utente

Sears

Sears Donner & Blitzen M44814 Manuale utente

BETHLEHEM LIGHTING

BETHLEHEM LIGHTING 6.5’ Tinsel Tree Manuale utente

Home Accents Holiday

Home Accents Holiday TG76P3D93L08 Manuale utente

Costway

Costway CM23595US Manuale utente

Home Accents Holiday

Home Accents Holiday TG76P4C15D03 Manuale utente

Holiday Living

Holiday Living TV40EH339C01 Manuale utente

CASARIA

CASARIA DBGB001 Manuale utente

Alpine

Alpine CRD100L-WT Manuale utente

Home Accents Holiday

Home Accents Holiday TG76M3W89C00 Manuale utente

CASARIA

CASARIA 104006 Manuale utente

Alpine

Alpine CRD111S-GN Manuale utente

Home Accents Holiday

Home Accents Holiday 1001540584 Manuale utente

Home Accents Holiday

Home Accents Holiday TG90P3F28D00 Manuale utente

Williams-Sonoma

Williams-Sonoma TG46P4368L01 Manuale utente

Trim a Home

Trim a Home 7.5 ft. Berkshire Fir Tree Manuale utente

Home Accents Holiday

Home Accents Holiday 1004363936 Manuale utente

Polytree

Polytree TG66EH148C17 Manuale utente