Polypipe UFHTIME2B Manuale utente
2 Zone Time Clock
User Guide UFHTIME2B
2
Overview
The 2 Zone Time Clock is designed to work
with the Dial Thermostat (UFHDIALB) to provide
time control per manifold. Time clock also has 1
other zone which can be used.
The unit is designed to be used with our range
of wired master wiring centres and slave units.
This user guide provides user settings and
Programming details, these and the advanced
settings can also be downloaded from
www.polypipeufh.com in A4 format.
3
Please Read Before
Programming Your Time Clock
Time settings
The Time Clock operates in 2 different modes:
Comfort - The time clock is on allowing
individual room thermostats to operate.
Setback - The time clock will be off,
meaning no room thermostats will
operate.
This is to assist the response time of the
heating system.
4
Contents
1Battery Access and User Controls
1.1 Keyboard
1.2 Display
2First Time Installation
2.1 Installing Batteries
2.2 Time and Date Adjustment
2.3 Zone Allocation
3Selecting a Pre-set Program P1 - P9
4 User Defined Programs U1 - U4
4.1 Creating User Defined Program
5
Contents
5Operating Menus
5.1 Automatic Mode
5.2 Off Mode
5.3 Holiday Mode
5.4 Keyboard Lock Function
6 Pre-set Programs
7Hidden Menus
8Technical Specification
9Fault Diagnostic
6
1 Battery Access and User Controls
1
2
3
7
1.1 Keyboard
8
1.2 Display
5
6
7
8
9
10
11
12
13
14
15
16
17 4
1 2 3
9
1-3 Setting or measured hour/text/indications
4Operating mode menu
(active mode is framed)
5Program number or parameter number
if “7” is displayed
6Temporary override function activated
7Installation parameter menu
8RF transmission logo
9Low batteries indicator
10 Modification of parameter
11 Program of the current day
12 Zone number or Period number in the
program of the current day or current
zone number
13 Key lock indicator
14 Current zone state: “On” (activated) and
“Off” (disabled)
15 Frost protection is activated
16 Days of the week (current day is framed)
17 AM/PM
NOTE: At any time, when the backlight is switched off, press the (OK)
key to activate the backlight and wake up the product. Press another
time the (OK) key to show the current setting temperature.
10
2 First Time Installation
This section will guide you to starting your time
clock for the first time.
2.1 Installing Batteries
- Lift the front panel off and insert the 2 x AAA
alkaline batteries supplied (or remove the small
protection sticker if the batteries are already
installed in the compartment)
- Replace the front panel
- Your time clock will ask you to set the time
- Note: The time and date setting can be set at
any time by pressing the (OK) key for 3 seconds
2.2 Time and Date Adjustment
The valve to be adjusted will blink, and is
adjusted with keys (-) and (+). Once the
adjustment is made, accept it with the (OK)
key.
The time clock will jump automatically to the
next value.
Indice
Altri manuali Polypipe Orologio
