PORTMAN EVO ELEMENT Manuale utente

USER MANUAL

version: 1.0 –NOV 2023

language: English

PLEASE READ THIS USER MANUAL CAREFULLY

BEFORE YOUR INITIAL START-UP!

Designed and made in Poland, EU

WELCOME

EVO ELEMENT™

2 / 20

◼WELCOME

Dear User,

Thank you for choosing Portman EVO

ELEMENT™–the original product with a

registered design.

We are proud to deliver you the highest quality,

greatest design and real passion with our

product.

Each fixture in the Portman portfolio is different,

yet all of them ensure you the best performance

to support your creativity.

FOR YOUR SAFETY, PLEASE READ THIS

USER MANUAL CAREFULLY BEFORE

YOUR INITIAL START-UP!

Please remember:

•any updates on this document,

•current products’ libraries,

•current products’ firmware,

•RMA procedure

can be found on our webpage in the support

area: www.portmanlights.com/support

The information and specifications are subject to change

without notice. Portman Lights Sp. z o. o. disclaims liability for

any injury, damage, direct or indirect loss, consequential or

economic loss or any other loss occasioned by the use of,

inability to use or reliance on the information contained in this

user manual.

◼TABLE OF CONTENTS

◼WELCOME.....................................................2

◼TABLE OF CONTENTS................................2

◼SAFETY INFORMATION.............................3

◼TECHNICAL SPECIFICATION....................5

◼PRODUCT OVERVIEW................................6

◼PREPARATION FOR USE...........................7

◼MENU .......................................................... 11

◼DMX MODES.............................................. 14

▪MODE SUPER SIMPLE ....................14

▪MODE SIMPLE ..................................14

▪MODE STANDARD..........................14

▪MODE STANDARD FINE ................15

▪MODE PIXEL......................................15

▪MODE PIXEL FINE............................16

▪RDM DATA........................................16

◼PHOTOMETRICS....................................... 17

USER MANUAL

SAFETY INFORMATION

3 / 20

◼SAFETY INFORMATION

WARNING!

This product is for professional use only! It is not for household use.

This product presents a risk of lethal or severe injury due to heat, electric shock, fire or falls. Intense and

flashing light could trigger epileptic seizures. Read this manual before your initial start-up and follow the

safety information in this manual and engraved on the fixture.

Every person involved in the installation, service and maintenance of this device must be qualified and have

experience in working with stage lighting fixtures.

Before your initial start-up, please make sure that there is no damage caused by transportation. Should

there be any, consult your dealer and do not use the device.

Please consider that damages caused by manual modifications to the device are not subject to warranty.

CAUTION! Keep this device away from rain and moisture!

CAUTION! Be careful with your operations! With a dangerous voltage you can

suffer an electrical shock when touching the fixture and wires!

CAUTION! When in operation the fixture’s surface becomes hot. Allow the

device to cool down for approximately 30 minutes before any maintenance or

service. Keep a minimum 0,2-meter distance from flammable materials to the

fixture.

CAUTION! Avoid looking directly into the light source (meant especially for

epileptics)!

CAUTION! Unplug the mains lead before opening the housing.

Protection against electrical shock

•Disconnect the fixture from AC power when not in use.

•Disconnect the fixture from AC power before any maintenance or service.

•Do not remove the rear cover. There are no user-serviceable parts inside.

•Always ground the fixture electrically.

•Use only the wires attached to the kit. If the power cable shows any sign of damage do not use it!

SAFETY INFORMATION

EVO ELEMENT™

4 / 20

•Use only a source of AC power that complies with local building and electrical codes and has both overload

and ground-fault protection.

•Do not expose the fixture to rain or moisture.

Protection against burns and fire

•Never operate when the fixture is damaged or some part is missing.

•Do not touch the surface when the fixture is in operation. The exterior of the fixture can reach temperatures

up to 70°C (158°F). Allow the fixture to cool for approximately 30 minutes before any maintenance or

service.

•Keep all combustible and flammable materials (for example fabric, wood, paper) at a distance of at least

20 centimetres away from the fixture. Do not cover the fixture when in operation and when it is hot.

•Do not modify the fixture.

•Do not operate the fixture if the ambient air temperature exceeds 45°C (113°F).

•Do not operate the fixture after an extreme change in the surrounding environment temperature. Allow the

fixture to acclimate for at least an hour before operating.

Protection against falls

•Use only professional tripods and clamps to mount the fixture. Ensure, that the clamp or tripod is designed

to withstand the weight of the fixture.

•Ensure that the structure intended for installation can hold at least 10 times the weight of all installed

devices.

•Ensure that all fixtures are attached correctly to the structure and use an approved means of secondary

attachment such as a safety cable.

•Block access below the work area whenever installing or removing the fixture.

Protection against eyesight damage and epileptic seizure

•Do not stare directly into the light sources. Never look at an exposed light source while it is lit.

•Provide advance notice that a flashlight is in use.

•Avoid long cycles of rapid flashing light.

•Always use safety glasses to protect your eyes when opening the front cover.

USER MANUAL

TECHNICAL SPECIFICATION

5 / 20

◼TECHNICAL SPECIFICATION

dimensions

866 x 205 x 189mm

(34.09 x 8.07 x 7.44in)

weight (fixture only)

5,2kg

(11,46lbs)

input voltage

100-240V 50Hz/60Hz

power consumption

max 240W

light source

portman haloLED

RGBW GLOW

power

3 x 60W

3 x 12W

luminous flux

TBA

colour temperature

1600K –3200K

R G B + White 6000K

CRI

>90

beam angle

94o

DMX channels

9, 15, 23, 39, 22, 37

DMX modes

connectors

2 x 5-PIN DMX

1 x AC powerCON TRUE1 (inlet and outlet)

1 x SMA (WDMX antenna) *optional

other features

built-in drivers

Portman Colour Feedback System

built-in macros

WDMX module optional

Appliance class

Class I

IP rating

IP20

declarations of

conformity

UKCA

PRODUCT OVERVIEW

EVO ELEMENT™

6 / 20

◼PRODUCT OVERVIEW

Dimensions

Pixel order

Back view

USER MANUAL

PREPARATION FOR USE

7 / 20

Kit content (what’s in the box)

•1x EVO ELEMENT™

•1x AC power wire 2m

•1x User Manual

•1x hanging adapter

•1x spigot + cotter

Optional accessories (not included)

•E-CONN™connector

•P2 EVO™base

•P2 EVO™height adapter

•male-male connector

•W-DMX module

•flight case

EVO ELEMENT™is fully compatible with the P2 EVO™fixture and its accessories (base, height adaptor, spigot and

cotter).

◼PREPARATION FOR USE

AC power connection

Luminaire must be powered with 100-240V and 50/60Hz. This fixture will automatically detect the

alternating current frequency. To turn on the fixture, simply plug in the powerCON TRUE1 and set the

power switch to “ON”. Use only high quality 3 x 2.5 mm2or larger mains power cords. Inspect all the power

feed cables for damages before use. Make sure to always connect the fixtures to a protected circuit with an

appropriate electrical ground. Never connect the fixture to a dimmer plug, even if it supplies proper current.

Only qualified electricians following all known electrical regulations can install the fixtures.

Luminaire comes with a power input cord terminated with powerCON TRUE1 on one end and tube

connectors on the other end. Follow the rules from the table below to assemble the power plug to the wire:

Connection

EU wires

US wires

Live

Brown

Black

Neutral

Blue

White

Earth

Green/Yellow

Green or Green/Yellow

PREPARATION FOR USE

EVO ELEMENT™

8 / 20

CAUTION! Do not use the power cord without a plug attached!

CAUTION! Always double-check the wire with a plug attached before use!

REMEMBER! Only a qualified person can change or install the plug!

Installation

Before mounting the fixture, read and follow all safety recommendations indicated in the Safety

Information.

EVO ELEMENT™may be hung using 2 brackets on the back of the fixture with rigging clamps or hung using

the hanging adapter (included). The fixture may be also installed on the the tripod or on a P2 EVO floor

base (sold separately). To install the fixture on a tripod use the hanging adapter. You can also use a hanging

adapter combined with the male-male connector, which makes it possible to put the fixture in the regular,

not upside-down orientation. The fixture is compatible with E-Conn, the structure building accessory.

Please refer to the E-CONN™user manual for more information. Please note that the PIXEL order and

MENU orientation can be changed in the menu to the upside down position.

To hang the fixture on a clamp under the truss you have to install the hanging adapter. Always double-

check if the hanging adapter is attached properly to the fixture and the spigot is locked tightly. The back

hanging brackets and the hanging adapter have 15 mm (0,59 in) holes for the spigot or rigging clamp.

Before rigging operations make sure, that the structure onto which you are mounting the fixtures can

withstand the weight of all of the fixtures. Check if there is enough room for ventilation, configuration and

maintenance in the location where you want to place the fixture. You must secure every hanged fixture with

the appropriate safety wire. Make sure there are no people under the work area when hanging fixtures. You

can aim the fixture to any position that you want except towards

the rigging structure. Remember not to let the power and DMX

wires touch the surface of the fixture. Always keep a safe

distance from the closest object.

The fixture may be installed also on optional accessories or

original accessories attached to P2 EVO™.

REMEMBER! Always secure the hung

fixture with safety wire!

USER MANUAL

PREPARATION FOR USE

9 / 20

CAUTION! Incorrect installation may result in the device falling and may

damage it or cause damage to other objects!

CAUTION! Always use only original spigots and cotters to install or hang the

fixture. Never use other brands’ spigots.

REMEMBER! Never use more than two units on base or on the hanging clamp

without additional safety support.

Operation modes

The luminaire can work in three operation modes: DMX, MASTER and SLAVE. DMX mode is designed to

work with DMX consoles. MASTER mode is designed to operate the fixture manually, without an external

controlling signal. In the MASTER mode, the fixture sends a controlling signal on the DMX output socket.

The signal can control other units in SLAVE mode. Please consider that unit in MASTER mode connected to

a regular DMX chain can corrupt DMX signal quality. The SLAVE mode allows you to control the fixture with

the control signal sent from a unit in MASTER mode. However, the DMX signal has got the highest priority

and the fixture always reacts to the connected DMX signal regardless of the operating mode.

Event

Operating Mode

DMX

Master

Slave

DMX wire

connected

Reacts to DMX

WDMX

connected

Reacts to WDMX

Stays in Master Mode

Receives control signal from

Master unit

DMX

disconnected

Keeps last DMX frame

Gets back to the last Macro or

Manual setting

Receives control signal from

Master unit

After power

reset

All values default

Gets back to the last Macro or

Manual setting

Receives control signal from

Master unit

There are three ways to operate the fixture in the DMX OPERATING MODE. You can use DMX input signal,

onboard manual control or WDMX input signal to control the fixture(if the WDMX card is installed). You can

link the fixture to a DMX controller using a 5 pin DMX wire, or Wireless Solution Sweden hardware (if the

WDMX card is installed). You can control each channel individually whether with a DMX controller or a

manual control build in the fixture. The fixture has 6 DMX personalities and it supports RDM. In DMX mode

fixture will not remember the manual settings after a reset is performed.

PREPARATION FOR USE

EVO ELEMENT™

10 / 20

To remember the manual settings you have to use MASTER mode. You can set any lighting scene using the

manual control section in the fixture’s menu or play build-in macros. The fixture always switches to DMX

when a DMX wire is connected. After disconnecting DMX in MASTER mode the fixture always goes back to

the last macro/manual setting. After a power reset the unit remembers the last manual/macro settings. If

you are going to control the fixture by onboard manual control it is recommended to use MASTER

OPERATING MODE.

RDM

RDM (Remote Device Management) is an enhancement of the DMX 512 protocol and allows bi-directional

communication between DMX consoles and fixtures. It works simultaneously with DMX 512 and on the

same lines and wires. RDM is not affecting non-RDM devices in a line however, non-RDM devices can

disrupt communication with the console. RDM allows you to change the fixture’s options (such as DMX

address) without even touching neither ladder or fixture’s buttons. The fixture fully supports the RDM

standards.

Manual operation

The fixture works in manual operation when it’s not receiving DMX signal whether wired or wireless. You

can adjust the brightness of all LED sources at once from the main screen, or you can control each source

individually from the “CONTROL ME MANUALLY” option in the menu (refer to the “Menu” chapter to learn

how to manually control channels). To enter the menu simply press “ENTER”.

DMX 512

The fixture automatically switches into DMX mode after receiving DMX data. To learn how to change the

DMX address or signal source (wired or wireless) refer to the “Menu” chapter. When the fixture works in

the wired DMX mode You can daisy chain fixtures using 5 pin DMX wires. When daisy-chaining remember,

that you can connect up to 32 devices per DMX 512 universe. Always terminate the DMX 512 line. Put the

120 Ωterminator into the last device’s DMX OUT XLR socket.

Indice

Altri manuali PORTMAN Attrezzatura di illuminazione

PORTMAN

PORTMAN P2 hexaline Manuale utente

Manuali Attrezzatura di illuminazione popolari di altre marche

Brizo

Brizo 8SP-MU-4 Manuale utente

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manuale utente

IKEA

IKEA BJÖRKSPIREA Manuale utente

Laserworld

Laserworld Evolution Series ES-400RGB Manuale utente

Alien

Alien RG STAR Manuale utente

EuroLite

EuroLite LED B-40 Manuale utente

Qazqa

Qazqa Suplux SL 3 Black 103062 Manuale utente

Commercial Electric

Commercial Electric 54568141 Manuale utente

CREE LIGHTING

CREE LIGHTING 304 Series Manuale utente

Goobay

Goobay 49867 Manuale utente

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manuale utente

Alkalite

Alkalite Krypton KT-81 Manuale utente

Clas Ohlson

Clas Ohlson GU10 Manuale utente

DTS

DTS DELTA 10 F Manuale utente

ring

ring Solar Steplight Manuale utente

One Stop Gardens

One Stop Gardens 57696 Istruzioni per il montaggio

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manuale utente

SIREM

SIREM Swimeo A2 Manuale utente