Potensic D85 Manuale utente
Point of interestTapFly Follow me
Farther.Faster.Clearer
(This camera works with 5G WIFI only.
Please make sure that your device
supports 5G WIFI.)
GPS Positioning
One key to Return Brushless motor
（2204 1500KV）Independent ESC
(stuck and high-temperature protection)
2.4GHz two-way
communication
(weak signal alarm, low voltage alarm)
User Manual
Important statement
Flight safety guidelines
Important statement and safety guidelines
Thank you for purchasing Potensic product. Please read this manual carefully before use and retain it for
future reference.
It should be retained for future reference.
● This aircraft is not a toy, but hobby grade model. It should be assembled and operated properly. Pilot
must operate this aircraft in safe way. Improper operation may cause injury or property damage.
● This aircraft is applicable for pilots aged 14+ who are with skilled flying experience.
● Users are in full charge of proper operating this aircraft. Manufacturer and dealers disclaim any
responsibility for damages caused by misuse.
● Keep the small accessories away from kids to avoid accident.
● Stay away from obstacles, crowds, power lines, trees or waters
● Keep the aircraft in dry environment
Hobby grade radio control aircraft is somewhat considered to be the item with the most potential danger.
Users should firmly uphold the principle of “safety comes first”. Never fly the aircraft near airports,
above crowds or in zones storing dangerous goods and realize operator's responsibility towards
accidents caused by improper operations.
Always choose a wide open area for every flight, well away from people and property. Never fly directly
over people or animals. Please don't fly in such bad weather conditions as high temperature, snow,
strong wind (≥level 5), rain or fog. Maintain a 7ft (2m) distance from the aircraft when taking off and
landing.
● Practice flying together with skillful pilot
Beginners are suggested to practice flying together with skillful pilot’s guidance. Do not fly alone.
The aircraft is composed by sophisticated electronic components and mechanical parts. To avoid
damages on the mechanical and electronic components, please keep the aircraft in dry environment
and use clean cloth to wipe the surface and keep it clean.
-1-
Gross weight: about 610g (with undercarriage, battery, camera and high landing gear)
Brushless motor: 2204 1500KV
Battery: 7.4V 2800mAh
Maximum flying time: about 19 minutes
Diagonal: 310mm Overall height: 150mm
Propeller changing tool X1
Aircraft X1 High landing gear X4
Extra Propellers A/B X2
Camera mount X1
Power adaptor X1
Screwdriver X1
Balance charger X1
Remote controller X1
Battery X1
Charging converter X1
Product profile
Package includes
Product configuration
● Bear proper operation and safe flight guidelines in mind
Please take a careful look at the manuals before flights for important information of product functions
and operation tips, and learn how to use the accessory, safe flight always comes first. Stay informed
of and abide strictly by relevant local laws and regulations. Keep away from any non-flight zones and
respect other people's privacy.
● Safe flying
● Keep distance from a flying aircraft
Please make sure you are in good shape mentally before every flight. Fly the aircraft as per your flying
experience. Never fly under influence of alcohol or drugs. Keep the remote controller at least 20 cm
away from your body when flying the aircraft.
Never use your hands to touch a flying aircraft under any circumstance. Don’t approach and touch a
landed aircraft before its propellers are completely locked.
● Keep away from heat source
The aircraft is made of metal, fiber, plastic, electronic component and other material. Please keep it
away from the heat source to avoid deformation or even damage caused by sun exposure and high
temperature.
● Environmental protection requirements
To protect our blue planet, please recycle the aircraft as per local laws and regulations.
Technical parameter of the aircraft
Mobile phone holder X1
Camera X1
-2-
● Please make sure that the clockwise and the counter-clockwise propellers are installed on
the correct motors, because the aircraft will not fly normally for wrong propellers installation.
● Be careful when installing the propellers, as they are a little sharp.
● Please use MJX propellers for this aircraft.
● Extra propellers can be ordered additionally.
Install propeller A and propeller B on the corresponding motor shaft and fix the rotor propellers tightly by
rotating them as per the “lock” direction showed on the propellers (indicated as Pic. 1).
●Detach the propellers:
● Attach the propellers:
Fix the brushless motor by rotor propellers changing tool and then rotate and remove the propellers as
per the “unlock” direction showed on the propellers (indicated as Pic. 2).
How to attach and detach the propellers
Product assemble
B
B
B
B
A
A
A
A
B
B
B
B
A
A
A
A
High landing gear installation
Insert the high landing gear plug into the socket locating at the bottom of the aircraft, align the 2 screws
positions and fix the high landing gear by screwing clockwise.
!
Pic. 1 Pic. 2
-3-
Battery installation
How to remove the battery
Slide the battery into the battery compartment at the rear of the aircraft by pushing with appropriate
force, the aircraft will make beep sounds with LED lights flashing. Please make sure that the battery
is installed firmly before flying.
Step 1. Put your thumb and middle finger on the designated position (indicated as Pic.1);
Step 2. Press the elastic buckle at the rear of the battery with your index finger, and pull backward with
appropriate force, then the battery will be removed (indicated as Pic. 2-3).
To avoid slipping, please keep your finger and your aircraft dry and clean.
How to charge the battery of aircraft
Step 1. Make sure that the power adaptor is connected with the power outlet (indicated as Pic. 1);
Step 2. Connect the balance charger to the power adaptor (indicated as Pic. 2);
Step 3. Insert the white plug of the charging converter face up into the socket of the balance charger
(indicated as Pic. 3);
Step 4. Slide the charging converter onto the battery from the middle position and insert the pins into
the battery plug to start charging (indicated as Pic. 4).
Full charging time takes about 7 hours.
How to charge the battery with charging device A:
!Attention: The battery should be installed firmly, failure to do so may affect the flight safety
of your aircraft. The aircraft may crash due to power-cut during the flight.
Pic.2 Pic.3
Pic.1
-4-
!
●The battery plug should be connected correctly with face up (but not upside down) when
plug into the balance charger; Failure to do so will result in battery cannot charge or charger
damaged.
●We recommend using 5V-2A adaptor for charging.
Warm tips：
●When charging is proceeding, the green light keeps flashing and the red light keeps solid on;
●When charging is finished, both of the green light and red light keep solid on;
●If the battery and charging converter is not connected with the balance charger, but the balance
charger is connected with the power adaptor, the red light keeps solid on and the green light is off;
●Once there is any malfunction, the red light will be solid on and the green light will keep flashing
rapidly.
●When charging is proceeding, the green light keeps flashing and the red light keeps solid on;
●When charging is finished, both of the green light and red light keep solid on;
●If the battery and charging converter is not connected with the balance charger, but the balance
charger is connected with the power adaptor, the red light keeps solid on and the green light is off;
●Once there is any malfunction, the red light will be solid on and the green light will keep flashing
rapidly.
Step 1: Make sure that the power adaptor is connected with the power outlet (indicated as Pic. 1);
Step 2: Connect the balance charger to the power adaptor by plug-in the USB cable accordingly
(indicated as Pic. 2);
Step 3: Insert the white plug of the charging converter face up into the socket of the balance charger
(indicated as Pic. 3);
Step 4: Slide the charging converter onto the battery from the middle position and insert the pins into
the battery plug to start charging (indicated as Pic. 4).
Full charging time takes about 7 hours.
How to charge the battery with charging device B:
Charging converter BatteryPower adaptor Balance charger
Pic. 1 Pic. 2 Pic. 3 Pic. 4
Charging converter BatteryUSB cable Balance charger
Pic. 2
Power adaptor
(not included)
Pic. 1 Pic. 3 Pic. 4 Pic. 5
USB
-5-
●Warm Tips: There are 2 pcs of EVA pad included. One is thin and the other one is thick. Please check
your camera's dimension and choose proper EVA pad before installing your camera.
!
●The battery plug should be connected correctly with face up (but not upside down) when
plug into the balance charger; Failure to do so will result in battery cannot charge or charger
damaged.
●We recommend using 5V 1-2A adaptor for charging.
●It’s not suggested to charge by computer.
Warm tips：
!●Need adult supervision when this aircraft is being played by children.
●Only batteries of the same or equivalent type as recommended are to be used.
●Insert batteries with correct polarity.
●Rechargeable batteries are to be removed from the aircraft before being charged.
●Rechargeable batteries are only to be charged under adult supervision.
●Exhausted batteries are to be removed from the aircraft.
●The supply terminals are not to be short-circuited.
●The charging line to be used with the product should be regularly examined for potential
hazard, such as damage to the cable or cord, plug, enclosure of other parts and that in the
event of such damage, the product must not be used until that damage had been properly
removed.
Mounted on Potensic original 5G WIFI camera and install “Potensic-M2” APP on mobile device, your
aircraft will be capable of flying in the intelligent flight modes: Follow Me, Point of Interest and Waypoint
flight.
Step 1. Insert the TF card(not included) into the card slot at the left side of the camera (Pic. 1);
Step 2. Take out the camera mount (Pic 2);
Step 3. Release the locked buckle of the camera mount; put the EVA pad at the bottom of camera
mount; then install the camera with the lens facing up (Pic. 3-4);
Step 4. Lock the buckle of the camera mount after the camera is installed firmly (Pic. 5);
Step 5. Attach the camera mount (with camera facing up) to the aircraft by slide-in firmly; then lock
the buckle at the bottom of the battery compartment (Pic. 6-7);
Step 6. Insert the “7” shaped plug of the USB cable into the socket at the left side of the camera
(Pic. 8);
Step 7. Insert the other plug of the USB cable into the socket locating at the bottom of the aircraft
(Pic. 9).
Camera & Camera mount installation
-6-
Pic. 4 Pic. 5 Pic. 6
EVA
soft
pad
Pic. 1 Pic. 2 Pic. 3
Pic. 7 Pic. 8 Pic. 9
TF CARD
Major parts of the aircraft
[1]
[2]
[3]
[1] Brushless motor
[2] High landing gear
[3] Propeller
[4] Camera/Camera mount
[4]
[6]
[7]
[8]
[5] [6] Battery compartment
[5]
[8]
USB aerial camera port
[7] Front light
Rear light
-7-
A B A B
OFF ON
Mode
Major parts of the remote controller
[1]
[2]
[3]
[4]
[5] [11]
[12]
[10]
[6]
[9]
[8]
[7]
[14]
[13]
[15]
L1 L2
[1] One key to take off / land
[2] One key to take off / land
[3] Left stick
[4] Gesture/ GPS mode switch
[5] Power switch
[6] Power indicator
[7] One key to return
[8] Photo/shooting
[9] Right stick
[10] Headless mode switch
[11] Null button
[12] LCD screen
[13] Null button
[14] Null button
[15] Null button
LCD screen
Mode
Remote Controller
Battery Level
GPS Mode
Satellite Amount
Altitude against Home Point
Photo
Video
Headless Mode
Return-to-Home
(RTH)
Aircraft Battery Level
Signal Strength Remote Controller
Throttle Mode
Distance against Home Point
-8-
OFF ON
A B A B
Mode
Step 1: Keep pressing the red button “ ” and turn on the remote controller (indicated as Pic. 1).
Please release it when the remote beeps and make sure that the indicator light on it flashes
quickly. It means the remote controller is under signal connection status.
Step 2: Power on the aircraft. The aircraft will make beep sounds with front and rear lights flashing and
will automatically link to the remote controller. Once the remote controller sends out a long beep
sound and the indicator light of the remote controller turns from flashing to solid on and the
signal icon “ ” is shown on the LCD screen, it means that signal connection is succeeded.
How to connect the signal of the aircraft with the
remote controller
Open the battery cover of the transmitter, insert 4*AA batteries following the polarity indicators ( Picture
below, battery is not included)and then close it.
L1 L2 L1 L2 L1 L2
How to install the battery of remote controller
!●Insert batteries with correct polarity.
●Non rechargeable batteries are not to be charged; the transmitter need 4*AA batteries for
work.
●Do not mix old and new batteries.
●Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.
●Rechargeable batteries are to be removed from the aircraft before being charged.
●Rechargeable batteries are only to be charged under adult supervision.
●Exhausted batteries are to be removed from the aircraft.
●The supply terminals are not to be short-circuited.
!● Signal connection is done once for all if the remote controller is not linked to other aircraft.
● Set the connection one by one to avoid signal connection error.
Pic. 1 Pic. 2 Pic. 3
OFF ON
A B A B
Mode
-9-
Indice
Altri manuali Potensic Quadricottero
