LED Display
Main Switch
3*USB Output
AC Switch Indicator
AC ON/OFF
DC Input
LED Light
LED Switch
QC3.0 USB
PD 65W Input/Output
12V DC Output
AC Output
Product Operating Instructions
1.Main Switch Button Control
Lightly press the main switch button to turn on the power, enter the working mode, at this situation , the power
display will be on, and the USB Ports and DC output port will get working, just press it again to enter the
shutdown mode.
2.LED Light Switch Control.
Lightly press the LED light switch to turn on the LED to enter the strong light mode. In the strong light mode,
press the switch in turns to enter the strobe mode strobe mode, and the SOS rescue mode and tap again to turn
off.
3.AC Switch Control.
Lightly press the AC switch to turn on and enter the 110V/60HZ working mode, the indicator light will shine as
green, press again to turn off the output. If the indicator light shows red, it means that the AC is in the protection
state, please check whether the connected electrical appliances meet the output power of this product.(Notes:
Devices with power over 150W are not supported)
*If the product work abnormally, please turn off the power switch immediately and check if the connected
equipment is incompatible.
*After use, please unplug the device and turn off the power.
*When the battery output voltage is close to the protection voltage or reaches the low voltage protection, the
device will automatically turn off the whole machine output.
*After connecting the product with the adapter, don't plug it into the AC port itself.
*When the product voltage is insufficient, the digital light shows that the battery is 0%, Please turn off all
outputs and charge the product in time.
3 / EN
